Eduardo Alberto de Souza Neto

Possui graduação em Engenharia Mecanica pelo Centro Federal de Educação Tecnológica Celso Suckow da Fonseca (1987), mestrado em Engenharia Mecanica pela COPPE/Universidade Federal do Rio de Janeiro (1989) e doutorado em Engenharia Civil/Mecanica Computacional - Swansea University (1994). Atualmente é Professor Titular no College of Engineering da Swansea University.

Informações coletadas do Lattes em 09/11/2025

Acadêmico

Formação acadêmica

Doutorado em Engenharia Civil/Mecanica Computacional

1990 - 1994

University of Wales Swansea
Título: Aspects of contniuum modelling and numerical simulation of internal and surface damage in finitely deformed solids
Orientador: David Roger Jones Owen
Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil.

Mestrado

1989 - Atual

Universidade Federal do Rio de Janeiro
Orientador: Prof. Edgardo O. Taroco/Prof. Raul A. Feijoo
Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos.

Graduação

1987 - Atual

Centro Federal de Educação Tecnológica Celso Suckow da Fonseca

Pós-doutorado

1994 - 1997

Pós-Doutorado. , University of Wales Swansea.

Idiomas

Inglês

Fala Bem, Lê Bem, Escreve Bem.

Espanhol

Fala Bem, Lê Bem, Escreve Bem.

Italiano

Lê Razoavelmente.

Francês

Lê Pouco.

Áreas de atuação

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos.

Grande área: Ciências Exatas e da Terra / Área: Matemática / Subárea: Matemática Aplicada/Especialidade: Análise Numérica.

Grande área: Ciências Exatas e da Terra / Área: Matemática / Subárea: Matemática Aplicada.

Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Propriedades Mecânicas dos Metais e Ligas.

Grande área: Engenharias / Área: Engenharia Mecânica.

Grande área: Engenharias / Área: Engenharia Civil.

Orientou

Fauzan Adziman

Multi-scale modelling of TRIP steels; Início: 2012; Tese (Doutorado em PhD) - Swansea University, College of Engineering, Swansea University; (Orientador);

Erick Isaac Saavedra-Flores

Multiscale modelling of wood cell-wall; 2011; Tese (Doutorado em PhD) - Swansea University, Universidade de Santiago, Chile; Orientador: Eduardo Alberto de Souza Neto;

Deniz D Somer

Computational Strategies For Multi-Scale Analysis of Solids: Small and Large Strain Formulations; 2009; Tese (Doutorado em PhD) - Swansea University,; Orientador: Eduardo Alberto de Souza Neto;

Sebastián Miguel Giusti

Analise de sensibilidade topologica em modelos constitutivos multi-escalas; 2009; Tese (Doutorado em PhD) - Swansea University, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Coorientador: Eduardo Alberto de Souza Neto;

Derek C D Speirs

Characterisation of Materials with Hyperelastic Microstructures through Computational Homogenisation and Optimisation Methods; 2008; Tese (Doutorado em PhD) - Swansea University, University of Wales Swansea; Orientador: Eduardo Alberto de Souza Neto;

Maurício Centeno Lobão

Finite element modelling of hydraulic fracture flow in porous media; 2007; Tese (Doutorado em PhD) - Swansea University, Engineering and Physical Sciences Research Council; Orientador: Eduardo Alberto de Souza Neto;

Maziar Partovi

Computational strategies for multiscale analysis of material behaviour; 2007; Tese (Doutorado em PhD) - Swansea University,; Orientador: Eduardo Alberto de Souza Neto;

Arturo Jose Carneiro Molina

Computational homogenization for multi scale finite element simulation; 2007; Tese (Doutorado em PhD) - Swansea University, University of Wales Swansea; Coorientador: Eduardo Alberto de Souza Neto;

Jose Luis Curiel Sosa

Computational modelling of critical points and structural discontinuities; 2006; Tese (Doutorado em PhD) - Swansea University, University of Wales Swansea; Coorientador: Eduardo Alberto de Souza Neto;

Wei Liu

Parallel computational strategies for modelling transient stokes fluid flow; 2006; Tese (Doutorado em PhD) - Swansea University, Engineering and Physical Sciences Research Council; Coorientador: Eduardo Alberto de Souza Neto;

Francisco Manuel Andrade Pires

Issues on the finite element modelling of degradation and prediction of failure in finitely straining ductile materials; 2005; Tese (Doutorado em PhD) - Swansea University,; Orientador: Eduardo Alberto de Souza Neto;

Mohammad Said Karimi

Finite/discrete element analyses of masonry structures; 2002; Tese (Doutorado em PhD) - Swansea University, Iranian Government; Coorientador: Eduardo Alberto de Souza Neto;

Produções bibliográficas

Amstutz, S. ; Novotny, A.A. ; de Souza Neto, E.A. . Topological derivative-based topology optimization of structures subject to Drucker Prager stress constraints. Computer Methods in Applied Mechanics and Engineering , v. 233-236, p. 123-136, 2012.
PERIC, D. ; de SOUZA NETO, E. A. ; Feijóo, R. A. ; Partovi, M. ; Molina, A. J. Carneiro . On micro-to-macro transitions for multi-scale analysis of non-linear heterogeneous materials: unified variational basis and finite element implementation. International Journal for Numerical Methods in Engineering (Print) , v. 87, p. 149-170, 2011.
Saavedra Flores, E.I. ; de SOUZA NETO, E. A. ; Pearce, C. . A large strain computational multi-scale model for the dissipative behaviour of wood cell-wall. Computational Materials Science , v. 50, p. 1202-1211, 2011.
Amstutz, S. ; Giusti, S. M. ; Novotny, A. A. ; de Souza Neto, E. A. . Topological derivative for multi-scale linear elasticity models applied to the synthesis of microstructures. International Journal for Numerical Methods in Engineering (Print) , v. 84, p. 733-756, 2010.
Flores, E.I. Saavedra ; de Souza Neto, E. A. . Remarks on symmetry conditions in computational homogenisation problems. Engineering Computations , v. 27, p. 551-575, 2010.
Vaz, M. ; De Santi, N. ; de Souza Neto, E. A. . Numerical Prediction of Ductile Failure Onset under Tensile and Compressive Stress States. International Journal of Damage Mechanics , v. 19, p. 175-195, 2010.
de Souza Neto, E. A. ; Amstutz, S. ; Giusti, S. M. ; Novotny, A. A. . Topological derivative-based optimization of micro-structures considering different multi-scale models. Computer Modeling in Engineering & Sciences (Print) , v. 62, p. 23-56, 2010.
Giusti, S. M. ; Novotny, A. A. ; de Souza Neto, E. A. . Sensitivity of the macroscopic response of elastic microstructures to the insertion of inclusions. Proceedings - Royal Society. Mathematical, Physical and Engineering Sciences (Print) , v. 466, p. 1703-1723, 2010.
Kaczmarczyk, ?ukasz ; Pearce, Chris J. ; Bicanic, N. ; de Souza Neto, E. A. . Numerical multiscale solution strategy for fracturing heterogeneous materials. Computer Methods in Applied Mechanics and Engineering , v. 199, p. 1100-1113, 2010.
Lobão, Mauricio Centeno ; Eve, Rob ; Owen, D.R.J. ; de Souza Neto, E. A. . Modelling of hydro-fracture flow in porous media. Engineering Computations , v. 27, p. 129-154, 2010.
Novotny, A. A. ; Sokolowski, J. ; de Souza Neto, E. A. . Topological sensitivity analysis of a multi-scale constitutive model considering a cracked microstructure. Mathematical Methods in the Applied Sciences , p. n/a-n/a, 2009.
SOMER, D ; de Souza Neto, E. A. ; DETTMER, W ; PERIC, D . A sub-stepping scheme for multi-scale analysis of solids. Computer Methods in Applied Mechanics and Engineering , v. 198, p. 1006-1016, 2009.
Giusti, S.M. ; Novotny, A.A. ; de Souza Neto, E. A. ; Feijóo, R.A. . Sensitivity of the macroscopic elasticity tensor to topological microstructural changes. Journal of the Mechanics and Physics of Solids , v. 57, p. 555-570, 2009.
GIUSTI, S ; NOVOTNY, A ; de Souza Neto, E. A. ; FEIJOO, R . Sensitivity of the macroscopic thermal conductivity tensor to topological microstructural changes. Computer Methods in Applied Mechanics and Engineering , v. 198, p. 727-739, 2009.
Giusti, S.M. ; Blanco, P.J. ; de Souza Neto, E. A. ; Feijóo, R.A. . An assessment of the Gurson yield criterion by a computational multi-scale approach. Engineering Computations , v. 26, p. 281-301, 2009.
SPEIRS, D ; de Souza Neto, E. A. ; PERIC, D . An approach to the mechanical constitutive modelling of arterial tissue based on homogenization and optimization. Journal of Biomechanics , v. 41, p. 2673-2680, 2008.
Watanabe, Ikumu ; Terada, Kenjiro ; de Souza Neto, E. A. ; PERIC, D . Characterization of macroscopic tensile strength of polycrystalline metals with two-scale finite element analysis. Journal of the Mechanics and Physics of Solids , v. 56, p. 1105-1125, 2008.
de Souza Neto, E.A. ; Feijóo, R.A. ; de Souza Neto, E. A. . On the equivalence between spatial and material volume averaging of stress in large strain multi-scale solid constitutive models. Mechanics of Materials (Print) , v. 40, p. 803-811, 2008.
Terada, Kenjiro ; Watanabe, Ikumu ; de Souza Neto, E. A. ; PERIC, D. . The importance of finite element performance for characterizing the macroscopic material behaviour with two-scale finite element analysis for polycrystalline metals. JSCE Journal of Applied Mechanics , v. 10, p. 1, 2007.
Curiel Sosa, J. L. ; de Souza Neto, E. A. ; OWEN, D. R. J. . A combined implicit-explicit algorithm in time for non-linear finite element analysis. Communications in Numerical Methods in Engineering , v. 22, p. 63-75, 2006.
VAZJR, M ; DESANTIJR, N ; VERRAN, G ; de Souza Neto, E. A. . Numerical and experimental assessment of ductile fracture in tensile and compressive-dominant processes. Journal of Materials Processing Technology , v. 177, p. 300-303, 2006.
de Souza Neto, E. A. ; Pires, F. M. Andrade ; OWEN, D. R. J. . F-bar-based linear triangles and tetrahedra for finite strain analysis of nearly incompressible solids. Part I: formulation and benchmarking. International Journal for Numerical Methods in Engineering (Print) , v. 62, p. 353-383, 2005.
ANDRADEPIRES, F ; de Souza Neto, E. A. ; OWEN, D . On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials. Computer Methods in Applied Mechanics and Engineering , v. 193, p. 5223-5256, 2004.
OWEN, D. R. J. ; Feng, Y. T. ; de Souza Neto, E. A. ; Cottrell, M. G. ; Wang, F. ; Andrade Pires, F. M. ; Yu, J. . The modelling of multi-fracturing solids and particulate media. International Journal for Numerical Methods in Engineering (Print) , v. 60, p. 317-339, 2004.
Andrade Pires, F. M. ; de Souza Neto, E. A. ; de la Cuesta Padilla, J. L. . An assessment of the average nodal volume formulation for the analysis of nearly incompressible solids under finite strains. Communications in Numerical Methods in Engineering , v. 20, p. 569-583, 2004.
de Souza Neto, E. A. . On general isotropic tensor functions of one tensor. International Journal for Numerical Methods in Engineering (Print) , v. 61, p. 880-895, 2004.
de Souza Neto, E. A. . A simple robust numerical integration algorithm for a power-law visco-plastic model under both high and low rate-sensitivity. Communications in Numerical Methods in Engineering , v. 20, p. 1-17, 2004.
de Souza Neto, E. A. . A fast, one-equation integration algorithm for the Lemaitre ductile damage model. Communications in Numerical Methods in Engineering , v. 18, p. 541-554, 2002.
de Souza Neto, E. A. . The exact derivative of the exponential of an unsymmetric tensor. Computer Methods in Applied Mechanics and Engineering , v. 190, p. 2377-2383, 2001.
de Souza Neto, E. A. ; FENG, Y . On the determination of the path direction for arc-length methods in the presence of bifurcations and ?snap-backs'. Computer Methods in Applied Mechanics and Engineering , v. 179, p. 81-89, 1999.
PERIC, D ; de Souza Neto, E. A. . A new computational model for Tresca plasticity at finite strains with an optimal parametrization in the principal space. Computer Methods in Applied Mechanics and Engineering , v. 171, p. 463-489, 1999.
de Souza Neto, E. A. ; PERIC, D. ; OWEN, D. R. J. . Continuum modelling and numerical simulation of material damage at finite strains. Archives of Computational Methods in Engineering , v. 5, p. 311-384, 1998.
OWEN, D. R. J. ; de Souza Neto, E. A. ; S.Y. Zhao ; PERIC, D. ; Loughran, J. . Finite element simulation of the rolling and extrusion of multi-phase materials Application to the rolling of prepared sugar cane. Computer Methods in Applied Mechanics and Engineering , v. 151, p. 479-495, 1998.
de Souza Neto, E. A. ; Hashimoto, K. ; PERIC, D. ; OWEN, D. R. J. . A Phenomenological Model for Frictional Contact Accounting for Wear Effects. Philosophical Transactions - Royal Society. Mathematical, Physical and Engineering Sciences (Print) , v. 354, p. 819-843, 1996.
de Souza Neto, E. A. ; PERIC, D. . A computational framework for a class of fully coupled models for elastoplastic damage at finite strains with reference to the linearization aspects. Computer Methods in Applied Mechanics and Engineering , v. 130, p. 179-193, 1996.
de Souza Neto, E. A. ; PERIC, D. ; Dutko, M. ; OWEN, D. R. J. . Design of simple low order finite elements for large strain analysis of nearly incompressible solids. International Journal of Solids and Structures , v. 33, p. 3277-3296, 1996.
de Souza Neto, E. A. ; PERIC, D. ; Huang, G. C. ; OWEN, D. R. J. . Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity. Communications in Numerical Methods in Engineering , v. 11, p. 951-961, 1995.
de Souza Neto, E. A. ; PERIC, D. ; OWEN, D. R. J. . Finite elasticity in spatial description: Linearization aspects with 3-D membrane applications. International Journal for Numerical Methods in Engineering (Print) , v. 38, p. 3365-3381, 1995.
de Souza Neto, E. A. ; HASHIMOTO, K ; PERIC, D. ; OWEN, D. R. J. . A phenomenological model for frictional contact of coated steel sheets. Journal of Materials Processing Technology , v. 50, p. 252-263, 1995.
de Souza Neto, E. A. ; Peric, Djordje ; Owen, D.R.J. . A model for elastoplastic damage at finite strains: algorithmic issues and applications. Engineering Computations , v. 11, p. 257-281, 1994.
de Souza Neto, E. A. ; PERIC, D. ; Owen, D.R.J. . A phenomenological three-dimensional rate-idependent continuum damage model for highly filled polymers: Formulation and computational aspects. Journal of the Mechanics and Physics of Solids , v. 42, p. 1533-1550, 1994.
de Souza Neto, E. A. ; PERIC, D. ; OWEN, D. R. J. . Computational Methods for Plasticity. Morikita Publishing Co., 2012.
VAZ JR, M. (Org.) ; de Souza Neto, E. A. (Org.) ; MUNOZ-ROJAS, P.A. (Org.) . Computational Materials Modelling: From Classical to Multi-scale Techniques. Wiley, 2010.
de SOUZA NETO, E. A. ; PERIC, D. ; OWEN, D. R. J. . Computational Methods for Plasticity. Chichester: Wiley, 2008.
de Souza Neto, E. A. ; Feijóo, R. A. . Variational Foundations of Multi-Scale Constitutive Models of Solid: Small and Large Strain Kinematical Formulation. In: M Vaz Jr.; EA de Souza Neto; P Munoz-Rojas. (Org.). Computational Materials Modelling: From Classical to Multi-Scale Techniques. Chichester: Wiley, 2010, v. , p. -.
PERIC, D. ; SOMER, D ; de Souza Neto, E. A. ; DETTMER, W.G. . On computational procedures for multi-scale finite element analysis of inelastic solids. In: B.D. Reddy. (Org.). IUTAM Symposium on Theoretical, Computational and Modelling Aspects of Inelastic Media. Berlin: Springer, 2008, v. , p. 3-13.
OWEN, D. R. J. ; Pires, F. M. Andrade ; de Souza Neto, E. A. . A computational model for viscoplasticity coupled with damage including unilateral effects. In: E. Onate; D.R.J. Owen. (Org.). Computational Plasticity. Berlin: Springer, 2007, v. , p. 145-164.
PERIC, D. ; de Souza Neto, E. A. ; Molina, A. J. Carneiro ; Partovi, M. . On multiscale analysis of heterogeneous composite materials: Implementation of micro-to-macro transitions in the finite element setting. In: E. Onate; D.R.J. Owen. (Org.). Computational Plasticity. Berlin: Springer, 2007, v. , p. 165-185.
OWEN, D. R. J. ; S.Y. Zhao ; de Souza Neto, E. A. . A Numerical Model and its Finite Element Solution for Multiphase Flow: Application to Pulp and Paper Processing. In: W. Ehlers; J. Bluhm. (Org.). Porous Media: Theory, Experiments and Numerical Applications. Berlin: Springer, 2002, v. , p. 43-458.
de Souza Neto, E. A. ; PERIC, D. ; OWEN, D. R. J. . On the numerical simulation of elastoplastic damage at finite strains. In: B.D. Reddy. (Org.). Recent Developments in Computational and Applied Mechanics. Barcelona: CIMNE, 1997, v. , p. 87-111.
de Souza Neto, E. A. ; PERIC, D. ; Dutko, M. ; OWEN, D. R. J. . Finite strain implementation of an elasto-plastic model for crushable foam. In: N.-E. Wilberg. (Org.). Advances in Finite Element Technology. Barcelona: CIMNE, 1995, v. , p. 174-188.
TAROCO, E. ; de Souza Neto, E. A. ; Novotny, A.A. . Variational Methods in Mechanics: Theory and Applications. Barcelona: CIMNE, 2007 (Livro editado).

Outras produções

de Souza Neto, E. A. ; PERIC, D. ; OWEN, D. R. J. . HYPLAS. 2008.

Histórico profissional

Endereço profissional

Swansea University. , Singleton Park, SA2 8PP - Swansea, - Grã-Bretanha, Telefone: (01792) 295256, Fax: (01792) 295676

Experiência profissional

1994 - 1997

University Of Wales Swansea

Vínculo: Pesquisador, Enquadramento Funcional: Post-doctoral senior research assistant

2004 - 2006

Laboratório Nacional de Computação Científica

Vínculo: Professor vistante, Enquadramento Funcional: Professor vistante, Carga horária: 40