Anke Rita Pyzalla

Pós-doutorado

Idiomas

Áreas de atuação

Produções bibliográficas

• PINTO, H. ; PYZALLA, A. R. ; HACKL, H. ; BRUCKNER, J. . A Comparative Study of Microstructure and Residual Stresses of CMT-, MIG- and Laser-Hybrid Welds. Materials Science Forum , v. 524, p. 627-632, 2006.

• ASSMUS, K. ; HÜBNER, W. ; PYZALLA, A. R. ; PINTO, H. . Structure transformations in CrNi steels under tribological stressing at low temperatures. Tribotest , v. 12, p. 149-159, 2006.

• PINTO, H. ; PYZALLA, A. R. ; ASSMUS, K. ; HÜBNER, W. ; BÜSCHER, R. . The Effect of Hydrogen on the Deterioration of Austenitic Steels During Wear at Cryogenic Temperature. Wear , v. 259, p. 424-431, 2005.

• PYZALLA, A. R. ; CAMIN, B. ; BUSLAPS, T. ; MICHIEL, M. ; KAMINSKI, H. ; KOTTAR, A. ; REIMERS, W. . Simultaneous Tomography and Diffraction Analysis of Creep Damage. Science , v. 308, p. 92-95, 2005.

• MARTINS, R. V. ; LIENERT, U. ; MARGUILES, L. ; PYZALLA, A. R. . Determination of the radial crystallite microstrain distribution within an AlMg3 torsion sample using monochromatic high energy synchrotron radiation. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 402, p. 278-287, 2005.

• PINTO, H. ; PYZALLA, A. R. ; REIMERS, W. ; BUSLAPS, T. ; HONKIMAKI, V. ; ZHANG, L. ; DABIN, Y. . Investigation of Synchrotron Radiation induced Damage in Thermal Aluminium Absorbers. J. Materials Science and Technology , v. 21, p. 19-26, 2005.

• PYZALLA, A. R. ; REETZ. B, ; JACQUES, A. ; FEIEREISEN, J. P. ; FERRY, O. ; BUSLAPS, T. ; REIMERS, W. . Relaxation of Phase Specific Elastic Strains/Stresses During Deformation of Al/Si-MMCs at Elevated Temperatures. Journal of Neutron Research , v. 12, p. 135-140, 2004.

• DIETER, S. ; PYZALLA, A. R. ; BAUER, A. ; SCHELL, N. ; MCCORD, J. ; SEEMANN, K. ; WANDERKA, N. ; REIMERS, W. . Correlations between Magnetic Properties of Single and Multi-layer CoFe/SiO2 Thin Films and their Microstructure, Texture and Internal Stress State. Zeitschrift für Metallkunde , v. 95, p. 163-175, 2004.

• SHAKHVOROSTOV, D. ; PINTO, H. ; PYZALLA, A. R. ; ENDERS, S. ; POHLMANN, K. ; SCHERGE, M. . Mechanical properties of tribologically modified nano-layers. Tribotest , v. 11, p. 95-102, 2004.

• BERNS, H. ; PYZALLA, A. R. . Microstructure and Residual Stresses of Stainless Steels Case Hardened with Nitrogen. Surface Engineering , v. 20, p. 459-463, 2004.

• PINTO, H. ; PYZALLA, A. R. ; REIMERS, W. ; BUSLAPS, T. ; HONKIMAKI, V. ; ZHANG, L. ; DABIN, Y. . Microstructural Damage in Thermal Absorbers induced by High Energy Synchrotron Light Irradiation. Journal of Neutron Research , v. 12, p. 189-194, 2004.

• ASSMUS, K. ; HÜBNER, W. ; PYZALLA, A. R. ; PINTO, H. . Die Entwicklung des Gefüges in der Verschlei spur bei Gleitverschlei von FeCrNi-Legierungen. Tribologie und Schmierungstechnik , v. 51, p. 30-33, 2004.

• PINTO, H. ; PYZALLA, A. R. ; HÜBNER, W. ; ASSMUS, K. . Influence of environment, temperature and chemical composition on the microstructural deterioration of CrNi steels during friction. Materialwissenschaft und Werkstofftechnik , v. 35, p. 716-721, 2004.

• SHAKHVOROSTOV, D. ; PINTO, H. ; PYZALLA, A. R. ; ENDERS, S. ; POHLMANN, K. ; SCHERGE, M. . Struktur-, Härte- und Spannungsmessung von ölgeschmierten Metall-Metall Tribokontakten. Materialwissenschaft und Werkstofftechnik , v. 35, p. 614-619, 2004.

• STEMPNIEWICZ, M. ; HINKEL, P. ; WEISS, S. ; DENKER, A. ; SANDER, M. ; PYZALLA, A. R. . Anwendung präparativer Methoden aus der Werkstoffkunde zur Untersuchung von Sauropodenknochen. Praktische Metallographie , v. 36, p. 217-221, 2004.

• PYZALLA, A. R. . New Possibilities in Stress and Strain Analyses with Synchrotron Radiation and Neutrons. Acta Crystallographica. Section A, Foundations of Crystallography , v. 60, p. 73, 2004.

• PYZALLA, A. R. ; REETZ. B, ; JACQUES, A. ; FEIEREISEN, J. P. ; FERRY, O. ; BUSLAPS, T. ; REIMERS, W. . In-situ Investigation of Stress Relaxation in Al/Si - MMCs using High Energy Synchrotron Radiation. Zeitschrift für Metallkunde , v. 95, p. 624-630, 2004.

• DIETER, S. ; PYZALLA, A. R. ; BAUER, A. ; SCHELL, N. ; MCCORD, J. ; SEEMANN, K. ; WANDERKA, N. ; REIMERS, W. . Correlations between Magnetic Properties of Single and Multi-layer CoFe/SiO2 Thin Films and their Microstructure, Texture and Internal Stress State. Zeitschrift für Metallkunde , v. 95, p. 163-175, 2004.

• CORCOVIK, S. ; PYZALLA, A. R. . In-situ Stress Analyses during High Temperature Oxidation of Mild Steel and Grey Cast Iron. Materials and Corrosion , v. 55, p. 341-351, 2004.

• LIMA, E. B. F. ; WEGENER, J. ; DONNE, C. D. ; GOERIGK, G. ; WROBLEWSKI, T. ; BUSLAPS, T. ; PYZALLA, A. R. . Dependence of the Microstructure, Residual Stresses and Texture of AA 6013 Friction Stir Welds on the Welding Process. Zeitschrift für Metallkunde , v. 94, p. 908-915, 2003.

• HÜBNER, W. ; PYZALLA, A. R. ; ASSMUS, K. ; WILD, E. ; WROBLEWSKI, T. . Phase Stability of AISI 304 Stainless Steel during Sliding Wear at Extremely Low Temperatures. Wear , v. 255, p. 476-480, 2003.

• LIMA, E. B. F. ; PYZALLA, A. R. ; REIMERS, W. ; KUO, J. -C. ; RAABE, D. . Mosaic size distributions in an aluminum bi-crystal deformed by channel die compression. Journal of Neutron Research , v. 11, p. 209-214, 2003.

• LIMA, E. B. F. ; WEGENER, J. ; DONNE, C. D. ; GOERIGK, G. ; WROBLEWSKI, T. ; BUSLAPS, T. ; PYZALLA, A. R. . Dependence of the Microstructure, Residual Stresses and Texture of AA 6013 Friction Stir Welds on the Welding Process. Zeitschrift für Metallkunde , v. 94, p. 908-915, 2003.

• WANG, L. ; PYZALLA, A. R. ; STADLBAUER, W. ; WERNER, A. . Changes in the microstructure on the rolling surface of railway rails. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 359, p. 31-43, 2003.

• HOLLER, K. ; REETZ. B, ; MULLER, K. ; PYZALLA, A. R. ; REIMERS, W. . Microstructure and Properties of Hot Extruded Brass CuZn40Pb2. Materials Science Forum , v. 426, p. 3667-3672, 2003.

• WILD, E. ; WANG, L. ; HASSE, B. ; WROBLEWSKI, T. ; GOERIGK, G. ; PYZALLA, A. R. . Microstructure Alterations at the Surface of a Heavily Corrugated Rail with strong Ripple Formation. Wear , v. 254, p. 876-883, 2003.

• HEITKEMPER, M. ; BOHNE, C. ; PYZALLA, A. R. ; FISCHER, A. . Fatigue and fracture behaviour of a laser surface heat treated martensitic high-nitrogen tool steel. International Journal of Fatigue , v. 25, p. 101-106, 2003.

• WANG, L. ; PYZALLA, A. R. ; STADLBAUER, W. ; WERNER, A. . Microstructure features on rolling surfaces of railway rails subjected to heavy loading. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 359, p. 31-43, 2003.

• FERNANDEZ, R. ; BRUNO, G. ; BORREGO, A. ; GONZALEZ-DONCEL, G. ; PYZALLA, A. R. . Determination of Residual Stress by Neutron Diffraction in 6061 Al 15 vol.-% SiCw Composites with Different Whisker Orientation/Distribution. Applied Physics. A, Materials Science & Processing , v. 74, p. S1146-S1148, 2002.

• STEMPNIEWICZ, M. ; CAMIN, B. ; PYZALLA, A. R. . Preliminary Investigation of Fossil Bone: XRD and XPS Study. Acta of Bioengineering and Biomechanics , v. 4, p. 406-407, 2002.

• MARTINS, R. V. ; LIENERT, U. ; MARGUILES, L. ; PYZALLA, A. R. . Dynamic In-situ Investigation of the Texture and the Strain State within a Plastically Deformed Solid AlMg3 Torsion Sample Using High Energy Synchrotron Radiation. Materials Science Forum , v. 404, p. 115-121, 2002.

• PYZALLA, A. R. ; REETZ. B, ; WEGENER, J. ; JACQUES, A. ; FERRY, O. ; BUSLAPS, T. . In - situ Analyses of Microstress and Texture Development during Tensile Deformation of MMCs at Room Temperature and Elevated Temperatures using Synchrotron Radiation. Materials Science Forum , v. 404, p. 535-540, 2002.

• DIETER, S. ; PYZALLA, A. R. ; WANDERKA, N. ; SEEMANN, K. ; REIMERS, W. . Dependence of Magnetic Properties, Texture and Residual Stresses on the Deposition Parameters of CoFe Single and Multi Layers. Materials Science Forum , v. 404, p. 785-790, 2002.

• ÖSTERLE, W. ; PYZALLA, A. R. ; WANG, L. ; ROOCH, H. . Investigation of White Etching Layers on Rails by Optical Microscopy, Electron Microscopy, X-Ray and Synchrotron X-Ray Diffraction. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 303, p. 150-157, 2001.

• PYZALLA, A. R. ; BOHNE, C. ; HEITKEMPER, M. ; FISCHER, A. . Influence of a Laser Rapid Heat Treatment on the Corrosion Resistance of the High Nitrogen Steel X30CrMoN15 1+0.3%N. Materials and Corrosion , v. 55, p. 99-105, 2001.

• PYZALLA, A. R. ; JACQUES, A. ; FEIEREISEN, J. P. ; BUSLAPS, T. ; D'ALMEIDA, T. ; LISS, K. -D. . In - situ Analyses of the Microstrains during Tensile Deformation of an AlSi - MMC at Room Temperature and Elevated Temperature. Journal of Neutron Research , v. 9, p. 435-442, 2001.

• MARTINS, R. V. ; LIENERT, U. ; MARGUILES, L. ; PYZALLA, A. R. . Residual Strain Tensor Determination within Highly Plastically Deformed Torsion Samples Using High Energy Synchrotron Radiation. Journal of Neutron Research , v. 9, p. 249-254, 2001.

• PYZALLA, A. R. ; WANG, L. ; WILD, E. ; WROBLEWSKI, T. . Changes in Microstructure, Texture and Residual Stresses on the Surface of a Rail resulting from Friction and Wear. Wear , v. 251, p. 901-907, 2001.

• HEITKEMPER, M. ; FISCHER, A. ; BOHNE, C. ; PYZALLA, A. R. . Wear Mechanisms of Laser-Hardened Martensitic High-Nitrogen-Steels under Sliding Wear. Wear , v. 251, p. 477-484, 2001.

• PYZALLA, A. R. ; WANG, L. ; WILD, E. ; WROBLEWSKI, T. . Influence of Wear on the Microstructure at the Surface of Railway Rails. Journal of Materials Processing Technology , v. 117, p. 3, 2001.

• BUSLAPS, T. ; MARTINS, R. V. ; HONKIMAKI, V. ; PYZALLA, A. R. . Investigation of Texture and Intergranular Strains of Aluminum and Steel Using High Energy Synchrotron Radiation and Comparison to Numerical Models. Journal of Materials Processing Technology , v. 117, p. 3, 2001.

• MÖLLER, D. ; REIMERS, W. ; PYZALLA, A. R. ; FISCHER, A. . Residual Stresses in Coronary Artery Stents. Journal of Biomedical Materials Research (Cessou em 2002. Cont. 1549-3296 Journal of Biomedical Materials Research. Part A) , v. 58, p. 69-74, 2000.

• ARIS, S. ; MARTINS, R. V. ; WEGENER, J. ; HONKIMAKI, V. ; PYZALLA, A. R. . Texture and Crystallite Microstrain Development during Tensile Deformation of Copper. Journal de Physique. IV , v. 11, p. 4-61-4-68, 2000.

• ARIS, S. ; MARTINS, R. V. ; HONKIMAKI, V. ; PYZALLA, A. R. . Simulation of Texture and Crystallite Microstrain Development during Compression and Tension of an Al-alloy and Comparison to Experimental Results. Computational Materials Science , v. 19, p. 116-122, 2000.

• HEITKEMPER, M. ; BOHNE, C. ; FISCHER, A. ; PYZALLA, A. R. . Verschlei verhalten des laserwärmebehandelten hochstickstofflegierten Werkzeugstahls X30CrMoN15 1. Materialwissenschaft und Werkstofftechnik , v. 31, p. 918-922, 2000.

• PYZALLA, A. R. ; MULLER, K. ; WEGENER, J. . Hot Extrusion of a PM AlSi-Alloy - Influence of Extrusion Parameters on Microstructure and Properties. Zeitschrift für Metallkunde , v. 91, p. 831-837, 2000.

• PYZALLA, A. R. ; WILD, E. ; WANG, L. ; WROBLEWSKI, T. . Einfluss des Verschlei es auf die Mikrostruktur und den Eigenspannungszustand von Schienen. Materialwissenschaft und Werkstofftechnik , v. 31, p. 776-779, 2000.

• PYZALLA, A. R. . Methods and feasibility of residual stress analysis by high energy synchrotron diffraction in transmission geometry using a white beam. Journal of Nondestructive Evaluation , v. 19, p. 21-31, 2000.

• PYZALLA, A. R. . Determination of the residual stress state in components using neutron diffraction. Journal of Neutron Research , v. 8, p. 187-213, 2000.

• PYZALLA, A. R. ; REIMERS, W. . A comparison of neutron and high energy synchrotron radiation as tools for texture and residual stress analysis. Materials Science Forum , v. 347, p. 34-39, 2000.

• MAYER, H. M. ; PYZALLA, A. R. ; REIMERS, W. ; ACHMUS, C. . Neutron and X-ray diffraction analysis of the influence of induction-hardening and deep-rolling on the residual stresses in crankshafts. Materials Science Forum , v. 347, p. 340-345, 2000.

• MAYER, H. M. ; PYZALLA, A. R. ; REIMERS, W. . Construction of the new materials science diffractometer STRESS-SPEC. Materials Science Forum , v. 347, p. 29-33, 2000.

• WROBLEWSKI, T. ; WILD, E. ; POESTE, T. ; PYZALLA, A. R. . Processing of X-ray diffraction imaging data using remote sensing techniques. Journal of Materials Science Letters , v. 19, p. 975-978, 2000.

• HEITKEMPER, M. ; BOHNE, C. ; FISCHER, A. ; PYZALLA, A. R. . Properties of Rapid Heat Treated High Nitrogen Steels. Surface Engineering , v. 11, p. 445-450, 2000.

• PYZALLA, A. R. ; WEGENER, J. ; MULLER, K. ; LISS, K. -D. . Influence of Extrusion Parameters on Microstructure and Texture of AlSi25Cu4Mg1. Materials Science Forum , v. 331, p. 781-786, 2000.

• FIORI, F. ; GIRARDIN, E. ; GIULIANI, A. ; LORENTZEN, T. ; PYZALLA, A. R. ; RUSTICHELLI, F. ; STANIC, V. . Neutron diffraction measurements for the determination of residual stresses in MMC tensile and fatigue specimens. Physica. B, Condensed Matter , v. 276, p. 923-924, 2000.

• PYZALLA, A. R. . Stress and strain measurements: X-rays and neutrons. Physica. B, Condensed Matter , v. 276, p. 833-836, 2000.

• ARIS, S. ; PYZALLA, A. R. ; REIMERS, W. . Simulation of the development of deformation textures and residual stress using the Taylor theory. Computational Materials Science , v. 16, p. 86-90, 1999.

• PYZALLA, A. R. ; REIMERS, W. . Residual Stress and Texture due to Cold and Hot Extrusion Processes. Textures and Microstructures , v. 33, p. 291-301, 1999.

• REIMERS, W. ; PYZALLA, A. R. ; BRODA, M. ; BRUSCH, G. ; DANTZ, D. ; LISS, K. -D. ; SCHMACKERS, T. ; TSCHENTSCHER, T. . The Use of High Energy Synchrotron Diffraction (HESD) for Residual Stress Analyses. Journal of Materials Science Letters , v. 19, p. 581-583, 1999.

• BRODA, M. ; PYZALLA, A. R. ; REIMERS, W. . X-ray Determination of Load and Residual Stress Distribution in C/SiC Composites. Applied Composite Materials , v. 6, p. 51-66, 1999.

• REIMERS, W. ; BRODA, M. ; BRUSCH, G. ; DANTZ, D. ; LISS, K. -D. ; PYZALLA, A. R. ; SCHMACKERS, T. ; TSCHENTSCHER, T. . Evaluation of Residual Stresses in the Bulk of Materials by High Energy Synchrotron Diffraction. Journal of Nondestructive Evaluation , v. 17, p. 129-140, 1998.

• PYZALLA, A. R. ; REIMERS, W. . Eigenspannungsanalysen an Werkstoffen und Bauteilen. Materialprüfung (München) , v. 7/8, p. 303-309, 1998.

• ZUCKO, M. ; POHLANDT, K. ; PYZALLA, A. R. ; REIMERS, W. ; KOCKELMANN, H. . Berechnung der Umformeigenspannungen beim Flie pressen und Vergleich mit experimen tellen Ergebnissen. Materialwissenschaft und Werkstofftechnik , v. 28, p. 417-423, 1997.

• PYZALLA, A. R. ; REIMERS, W. . Microstructural Dependence of Thermal Residual Microstresses in PMMCs. Physica. B, Condensed Matter , v. 234, p. 974-976, 1997.

• PYZALLA, A. R. ; BERNS, H. . Berechnungs- und experimentelle Verfahren zur Charakterisierung thermischer Mikro eigen spannungen in Stückverbunden. Materialwissenschaft und Werkstofftechnik , v. 28, p. 180-197, 1997.

• PYZALLA, A. R. ; GENZEL, C. ; REIMERS, W. . Thermal Residual Microstresses in Steel - NbC Particulate Composites Studied by X-Ray and Neutron Diffraction. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 212, p. 130-138, 1996.

• BROECKMANN, C. ; PYZALLA, A. R. . Microstructural Aspects of Failure in Particle Reinforced Metal Matrix Composites. Computational Materials Science , v. 5, p. 32-44, 1996.

• FISCHER, A. ; PYZALLA, A. R. . Calculation of Thermal Micro Residual Stresses in Materials Containing Coarse Hard Phases. Computational Materials Science , v. 2, p. 270-278, 1994.

• PYZALLA, A. R. ; WEGENER, J. ; MARTINS, R. V. ; REIMERS, W. . Experimentelle Analysen der Gefüge-, Textur- und Eigenspannungsentwicklung umgeformter mehrphasiger Werkstoffe. In: DFG, 2005. Abschlu bericht zum DFG-Schwerpunktprogramm. Aachen: Verlagshaus Mainz GmbH. v. 1074. p. 210-217.

• PYZALLA, A. R. . Mechanical Stress in Tribo-Layers. In: 14th International Colloquium Tribology, 2004, Ostfildern. Tribology and Lubrication Engineering. v. 1. p. 85-89.

• ASSMUS, K. ; HÜBNER, W. ; PYZALLA, A. R. ; PINTO, H. . Structure Transformations in CrNi Steels under Tribological Stressing at Low Temperatures. In: 14th International Colloquium Tribology and Lubriction Engineering, 2004, Ostfildern. Proc. 14th International Colloquium Tribology and Lubriction Engineering. v. 2. p. 1047-1053.

• SHAKHVOROSTOV, D. ; PINTO, H. ; PYZALLA, A. R. ; ENDERS, S. ; SCHERGE, M. . Mechanical Properties of Tribologically Modified Nanolayers. In: 14th International Colloquium Tribology and Lubriction Engineering, 2004, Ostfildern. Proc. 14th International Colloquium Tribology and Lubriction Engineering. v. 1. p. 59-84.

• HÜBNER, W. ; ASSMUS, K. ; PYZALLA, A. R. ; PINTO, H. . Hydrogen uptake in stainless steels at low temperatures. In: HYPOTHESIS V, Hydrogen Power Theoretical and Engineering Solutions Int. Symp., 2003, Porto Conte. Proceedings of HYPOTHESIS V, Hydrogen Power Theoretical and Engineering Solutions Int. Symp.. Padova: Servizi Grafici Editoriali. v. 1. p. 581-588.

• JACQUES, A. ; GRADT, T. ; ASSMUS, K. ; PYZALLA, A. R. ; PINTO, H. ; STUKE, S. . Hydrogen Absorption by Steels during Friction. In: Hydrogen and Fuel Cells 2003 Conference and Trade Show, 2003, Vancouver. Proceedings of the Hydrogen and Fuel Cells 2003 Conference and Trade Show. v. 1. p. 11p.

• MULLER, S. ; DENCKS, I. ; MULLER, K. ; PYZALLA, A. R. . Extrusion of Magnesium Profiles and Microstructure Characterization. In: 6th International Conf. on Magnesium Alloys and Their Applications, 2003, Wolfsburg. Proc. of the 6th International Conf. on Magnesium Alloys and Their Applications. v. 1. p. 254-259.

• ASSMUS, K. ; HÜBNER, W. ; BOHSE, J. ; PINTO, H. ; PYZALLA, A. R. . Untersuchungsmethoden für die Austenitstabilität bei tribologischer Beanspruchung von FeCrNi-Legierungen. In: Kolloquium Schallemission, 2003, Berlim. DGZfP-Berichtsband. p. 89-102.

• PYZALLA, A. R. ; REETZ. B, ; JACQUES, A. ; FEIEREISEN, J. P. ; FERRY, O. ; BUSLAPS, T. . Synchrotron Radiation In - situ Analyses of AA 6061 + Al2O3 During Tensile Deformation. In: Recent Advances in Experimental Mechanics In Honor of Isaac M. Daniel, 2002, Dordrecht. Proc. Recent Advances in Experimental Mechanics In Honor of Isaac M. Daniel. p. 527-534.

• DONNE, C. D. ; LIMA, E. B. F. ; WEGENER, J. ; PYZALLA, A. R. ; BUSLAPS, T. . Investigations on Residual Stresses in Friction Stir Welds. In: International Symposium on Friction Stir Welding, 2001, Kobe. Proc. 3rd International Symposium on Friction Stir Welding.

• HEITKEMPER, M. ; BOHNE, C. ; PYZALLA, A. R. ; FISCHER, A. . Fatigue and Fracture Behaviour of a Laser Heat Treated Martensitic High-Nitrogen Tool Steel. In: 10th International Congress on Fatigue ICF 10, 2001, Oahu. Adv. in Fracture Research, Proc. ICF 10.

• MARTINS, R. V. ; LIENERT, U. ; MARGUILES, L. ; PYZALLA, A. R. . Investigation of the Strain Distribution in an Al-MMC Torsion Sample using High Energy Synchrotron Radiation. In: TMS Fall meeting 2001, 2001, Indianapolis. Proc. TMS Fall meeting 2001. p. 285-295.

Prêmios