Andreas Öchsner

Possui graduação em Engenharia Aeronáutica e Aeroespacial pela Universitat Stuttgart(1993), mestrado em Engenharia Aeronáutica e Aeroespacial pela Universitat Stuttgart(1997) e doutorado em Ciências da Engenharia pela Universitat Erlangen-Nurnberg (Friedrich-Alexander)(2003). Atualmente é Professor Assistente / Pesquisador da Universidade de Aveiro, Revisor de periódico da International Journal of Adhesion & Adhesives e Membro de corpo editorial da International Journal of Molecular Engineering. Tem experiência na área de Engenharia Mecânica, com ênfase em Mecânica dos Sólidos.

Informações coletadas do Lattes em 10/11/2022

Acadêmico

Formação acadêmica

Doutorado em Ciências da Engenharia

1997 - 2003

Universitat Erlangen-Nurnberg (Friedrich-Alexander)
Título: Experimental and Numerical Investigations of Elastic Plastic Properties of the Model Cellular Materials
Orientador: Günther Kuhn
Grande área: Engenharias

Mestrado em Engenharia Aeronáutica e Aeroespacial

1993 - 1997

Universitat Stuttgart
Orientador: D Brüggemann
Grande área: Engenharias / Área: Engenharia Aeroespacial.

Graduação em Engenharia Aeronáutica e Aeroespacial

1991 - 1993

Universitat Stuttgart

Idiomas

Inglês

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Português

Compreende Razoavelmente, Fala Razoavelmente, Lê Razoavelmente, Escreve Razoavelmente.

Francês

Compreende Razoavelmente, Fala Razoavelmente, Lê Razoavelmente, Escreve Razoavelmente.

Alemão

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Áreas de atuação

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos/Especialidade: Mecânica dos Corpos Sólidos, Elásticos e Plásticos.

Participação em eventos

Uniaxial Elasto-Plastic Behaviour of Adhesively Bonded Hollow Sphere Structures (HSS): Numerical Simulations and Experiments.. International Conference on Processing & Manufacturing f Advanced Materials - THERMEC 2006. 2006. (Congresso).

A new procedure for the determination of the complete set of linear elastic constants of thin adhesive layers.. 20th International Symposium 'Swiss Bonding 06'. 2006. (Congresso).

Ad- and Desorption of Oxygen at Metal-Oxide Interfaces: Two-Dimensional Modelling Approaches.. 135th Annual Meeting & Exhibition - TMS 2006. 2006. (Congresso).

Numerical and Experimental Investigations of Hollow Sphere Structures..Workshop of the Graduate School "Micro-Macro Interaction in Structured Media and Particle Systems" of the Otto-von-Guericke-University of Magdeburg, Caputh, Germany. 2006. (Seminário).

Cellular metals - promising lightweight materials: types, applications and elasto-plastic properties..Seminar on Applied Mechanics, Otto-von-Guericke-University of Magdeburg, Magdeburg, Germany. 2006. (Seminário).

On the experimental realisation of multi-axial stress states for cellular and porous materials: determination of elasto-plastic properties. COBEM 2005, 18th International Congress of Mechanical Engineering. 2005. (Congresso).

Numerical simulation of carburization and decarburization profiles in steels.. International Conference on Surfaces, Coatings and Nanostructured Materials - nanoSMat2005, Aveiro. 2005. (Congresso).

Parametric Analysis of Heat Transfer in Closed-Cell Cellular Metals.. First International Conference on Diffusion in Solids and Liquids, Aveiro. 2005. (Congresso).

Analytical Investigation of Thermal Characteristics of Composites with Different Topology: Effect of Perturbations.. First International Conference on Diffusion in Solids and Liquids, Aveiro. 2005. (Congresso).

Numerical and Analytical Calculation of the Orthotropic Heat Transfer Properties of Fibre Reinforced Materials.. First International Conference on Diffusion in Solids and Liquids. 2005. (Congresso).

Influence of material parameters on the deformed edge shape of thin elastic interphases.. 16th International Conference on Computer Methods in Mechanics CMM-2005. 2005. (Congresso).

Numerical investigation of cellular metals under consideration of internal pore pressure: small and large displacement approaches.. 16th International Conference on Computer Methods in Mechanics CMM-2005. 2005. (Congresso).

Ad- and desorption of oxygen at metal-oxide interfaces: numerical approach for non-homogeneous oxide distribution.. Diffusion in solids: Past, present and future DiSo-05. 2005. (Congresso).

Numerical Simulation of the Segregation of Oxygen at Metal/Oxide-Interfaces.. Progress in Computational Heat and Mass Transfer (4th International Conference on Computational Heat and Mass Transfer ICHMT). 2005. (Congresso).

Refinement of the Evaluation of Standard ISO/DIN Test Procedures of Adhesive Technology: an Overview.. 19. International Congress HSR Rapperswil 'Swiss Bonding 05'. 2005. (Congresso).

Determination of the Plastic Material Properties of Cellular and Porous Media due to Biaxial Stress States.. 3rd International Conference on Materials Testing (Test 2005). 2005. (Congresso).

Errors Connected with the Evaluation of the Tensile Butt-Joint Test of Adhesive Technology.. 3rd International Conference on Materials Testing (Test 2005). 2005. (Congresso).

Evaluation of Material Properties from Axisymmetric Tensile Samples: Remarks on Error Estimate.. 3rd International Conference on Materials Testing (Test 2005). 2005. (Congresso).

Cellular metals - promising lightweight materials: types, applications and elasto-plastic properties.Seminar on Applied Mechanics. 2005. (Seminário).

On the Influence of the Internal Pore Pressure on the Elasto-Plastic Behaviour of Cellular and Porous Materials..2. Workshop on Advanced Computational Mechanics. 2005. (Seminário).

On the experimental realisation of multi-axial stress states for cellular and porous materials: determination of elasto-plastic properties..Scientific Seminar at the Osaka University. 2005. (Seminário).

Imperfect Transmission Conditions for Thin Glue Layers and Edge Effects in Adhesively Bonded Joints.. 2004 Beijing International Bonding Technology Symposium (China Swiss Bonding '04). 2004. (Congresso).

Finite Difference Scheme for the Simulation of the Internal Oxidation of Metal Alloys.. Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004). 2004. (Congresso).

Numerical Estimate of Error Connected with the Application of Imperfect Transmission Conditions in Composite Materials.. Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004). 2004. (Congresso).

Critical Analysis of the Evaluation of Plastic Material Properties Obtained from Standard Round Tensile Specimens.. Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004). 2004. (Congresso).

Macroscopic Behaviour of Porous Metals with Internal Gas Pressure under Multiaxial Loading Conditions. Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004). 2004. (Congresso).

Thin Elasto-Plastic Imperfect Interphase between Different Elastic Materials under Plane Strain Conditions.. International Symposium on Developments in Plasticity and Fracture - Centenary of M.T. Huber Criterion. 2004. (Congresso).

Porous Metals with Internal Gas Pressure - Macroscopic Tensile and Compression Behaviour. International Symposium on Developments in Plasticity and Fracture - Centenary of M.T. Huber Criterion. 2004. (Congresso).

Effective Thermal Conductivity of Syntactic Metal foams.. International Conference on Applications of Porous Media ICAPM 2004.. 2004. (Congresso).

Strength of Adhesively Bonded Steel Joints.. 18. International Congress HSR Rapperswil 'Swiss Bonding 04'. 2004. (Congresso).

Destructive Testing of Adhesively Bonded Joints Under Static Tensile Loading .. 18. International Congress HSR Rapperswil 'Swiss Bonding 04'. 2004. (Congresso).

Analytic Adherend Deformation in the New ISO 11003-2 Standard: Should it Really be Applied ?. 18. International Congress HSR Rapperswil 'Swiss Bonding 04'. 2004. (Congresso).

Numerical Simulation of the Mechanical Behavior of Cellular Materials..Mechanical Engineering Colloquium, University of Maribor. 2004. (Simpósio).

FE-Simulation of the Elastic-Plastic Transition Zone of Cellular Metals under Complex Loading Conditions.. 15th International Conference on Computer Methods in Mechanics CMM-2003. 2003. (Congresso).

Automatized Evaluation of Decarburization Profiles for the Determination of Carbon Diffusivities in Steels.. 2nd International Conference on Material Testing (Test 2003). 2003. (Congresso).

Improvement of Substrate Deformation Correction in the ISO Adhesive Tensile-Shear Test.. 2nd International Conference on Material Testing (Test 2003). 2003. (Congresso).

Theoretical Expressions for the Porosity Dependence of Ceramics Characteristics and Comparison with Experiment.. 2nd International Conference on Material Testing (Test 2003). 2003. (Congresso).

Materials Properties of Open-Cell Al2O3 Foams - Comparison of Static and Dynamic Analyses and Rheological Modelling.. 2nd International Conference on Material Testing (Test 2003). 2003. (Congresso).

Stochastic Modelling of Particle Distributions.. Spring Meeting of the German Physical Society. 2003. (Congresso).

Finite Element Simulation of Carburization and Decarburization Processes.. Spring Meeting of the German Physical Society. 2003. (Congresso).

Experimental and numerical investigation of the elasto-plastic behaviour of model cellular materials..TUW-MATERIALS Kolloquium. 2003. (Seminário).

Continuum Mechanical Basics of the Elasto-Plastic Behaviour of Cellular Materials..Internal Seminar of SFB (Special Research Programme) 396. 2003. (Seminário).

Experimental and Numerical Investigation of the Elasto-Plastic Behaviour of Model Cellular Materials..Seminar at the Federal Institute for Materials Research and Testing (BAM). 2003. (Seminário).

Numerical Simulation of the Mechanical Behavior of Cellular Materials.International Mini-Symposium on Mechanics of Cellular and Composite Materials. 2003. (Simpósio).

Numerical Simulation of the Mechanical Behavior of Cellular Materials..International Mini-Symposium on Computational Mechanics. 2003. (Simpósio).

Comparison of Static and Dynamical Analysis of Material Properties of Open-Cell ZrO2 Foams.. Materials Week 2002. 2002. (Congresso).

Fracture Mechanics Analysis of Rim Zone Tensile Residual Stress States.. Materials Week 2002. 2002. (Congresso).

A New Versatile Simulation Tool for Thermochemical Reactions.. Materials Week 2002. 2002. (Congresso).

Simulation of the Elastic-Plastic Transition Region of Cellular Metals.. Materials Week 2002. 2002. (Congresso).

Comparison of Static and Dynamic Material Properties of Spongiosa-Like Bioceramics.. 8th International Conference on Ceramic Processing Science. 2002. (Congresso).

On the decarburisation and carburisation of low allowed steels and modelling of carbon depth profiles..Materials Physik Seminar. 2002. (Seminário).

Perforated Aluminum-Alloys as a Model for the Nonlinear Behavior of Cellular Metals.. EUROMAT 2001. 2001. (Congresso).

The Simulation-Aided Tensile-Shear Test - a Simple Key to Component Layout in Adhesive Technology.. 15. International Symposium Swiss Technical Conference 'Bonding'. 2001. (Congresso).

Modified Voigt-Reuss Mixing Rules for Cellular Materials.. Junior EUROMAT 2000. 2000. (Congresso).

Perforated Aluminium Alloys as a Model for Damage and Fracture of Cellular Metals.. DGM Symposium on Metals Foams.. 2000. (Congresso).

Inelastic constitutive laws: experiment and implementation..Academy of the University of Erlangen-Nuremberg, Germany. 2000. (Seminário).

Damage and Fracture of Perforated Aluminum Alloys.. EUROMAT 1999. 1999. (Congresso).

Participação em bancas

ÖCHSNER, Andreas; REN, Z; HRIBERSEK, M. President of the Board for the Assessment of the Doctoral Thesis. 2006. University of Maribor.

Orientou

Andreas Öchsner

Experimental and numerical studies of the application of advanced sandwich panels with porous core materials; Início: 2006; Tese (Doutorado em Doutoramento no Ramo de Engenharia Mecânica) - Departamento de Engenharia Mecânica, Fundação para a Ciência e a Tecnologia; (Orientador);

Sü enbach T

; Numerical Investigation of the Mechanical Behaviour of Thin Layers; ; 2006; Dissertação (Mestrado em Mestrado Em Engenharia Mecânica) - Departamento de Engenharia Mecânica,; Orientador: Andreas Öchsner;

Thomas Fiedler

Numerical Simulation of Cellular Metalls; ; 2004; 0 f; Dissertação (Mestrado em Engenharia Mecânica) - Universidade de Aveiro,; Orientador: Andreas Öchsner;

Lamprecht K

; Numerical Simulation of Cellular Model Materials; ; 2002; Dissertação (Mestrado em Mechanical Engineering) - Institute of Applied Mechanics, University of Erlangen-Nuremberg,; Orientador: Andreas Öchsner;

Bauer T

; Application of the Finite Element Method to Diffusion Problems; ; 2001; Dissertação (Mestrado em Mechanical Engineering) - Institute of Applied Mechanics, University of Erlangen-Nuremberg,; Orientador: Andreas Öchsner;

Stief M

; Numerical analysis of an engine part made of AlSi alloy; ; 1999; Dissertação (Mestrado em Mechanical Engineering) - Institute of Applied Mechanics, University of Erlangen-Nuremberg,; Orientador: Andreas Öchsner;

Erlbacher S

; Construction of a biaxial testing machine for aluminium specimens; ; 1998; Dissertação (Mestrado em Mechanical Engineering) - Institute of Applied Mechanics, University of Erlangen-Nuremberg,; Orientador: Andreas Öchsner;

Weih W

; Conception of biaxial testing machine for composite materials; ; 1998; Dissertação (Mestrado em Mechanical Engineering) - Institute of Applied Mechanics, University of Erlangen-Nuremberg,; Orientador: Andreas Öchsner;

Produções bibliográficas

FIEDLER, T ; ÖCHSNER, Andreas ; GRÁCIO, J . The uniaxial strain test a simple method for the characterization of porous materials. Structural Engineering and Mechanics , v. 22, n.1, p. 17-32, 2006.
ÖCHSNER, Andreas ; GRÁCIO, J . On the Thick-Adherend Tensile Shear Test of Adhesive Technology: Limitations and Correction Methods. Journal of Testing and Evaluation , v. 34, n.1, p. 53-59, 2006.
ÖCHSNER, Andreas ; STASIEK, M ; GRÁCIO, J . Ad- and Desorption of Oxygen at Metal-Oxide Interfaces: Numerical Approach for Non-Homogeneous Oxide Distribution. Diffusion and Defect Data, Solid State Data. Part A, Defect and Diffusion Forum , n.249, p. 35-40, 2006.
ÖCHSNER, Andreas ; MISHURIS, G ; KUHN, G . FEM-analysis of nonclassical transmission conditions between elastic structures Part 1: Soft imperfect interface. Computers Materials & Continua , Forsyth, USA, v. 2, p. 227-238, 2006.
ÖCHSNER, Andreas ; Tane M. ; Nakajima H. . Prediction of the thermal properties of lotus-type and quasi-isotropic porous metals: Numerical and analytical methods.. Materials Letters (General ed.) , v. 60, p. 2690-2694, 2006.
FIEDLER, Thomas ; PESETSKAYA, e ; ÖCHSNER, Andreas ; GRÁCIO, J . Calculation of the Thermal Conductivity of Porous Materials.. Materials Science Forum , v. 514-51, p. 754-758, 2006.
FIEDLER, T ; ÖCHSNER, Andreas ; GRÁCIO, J ; KUHN, G . Structural Modeling of the Mechanical Behavior of Periodic Cellular Solids: Open-Cell Structures. Mechanics Of Composite Materials, v. 41, n.3, p. 277-290, 2005.
ÖCHSNER, Andreas ; KUHN, G ; GRÁCIO, J . Investigations of Cellular Solids Under Biaxial Stress States. Exp. Mech.. Experimental Mechanics , v. 45, n.4, p. 325-330, 2005.
ÖCHSNER, Andreas ; GRÁCIO, J . On the macroscopic thermal properties of syntactic metal foams. Multidiscipline Modeling In Mat And Str, v. 1, n.2, p. 171-181, 2005.
FIEDLER, T ; PESETSKAYA, e ; ÖCHSNER, Andreas ; GRÁCIO, J . Numerical and Analytical Calculation of the Orthotropic Heat Transfer Properties of Fibre Reinforced Materials. Materialwissenschaft und Werkstofftechnik , v. 36, n.10, p. 602-607, 2005.
VESENJAK, M ; ZUNIC, Z ; ÖCHSNER, Andreas ; HRIBERSEK, M ; REN, Z . Heat Conduction in Closed-Cell Cellular Metals. Materialwissenschaft und Werkstofftechnik , v. 36, n.10, p. 608-612, 2005.
ÖCHSNER, Andreas ; MISHURIS, G ; GRÁCIO, J . A Strategy for the Simulation of Adhesive Layers. Adhesion And Interface, v. 6, n.1, p. 1-6, 2005.
MISHURIS, G ; ÖCHSNER, Andreas . Edge Effects Connected with Thin Interphases in Composite Materials. Composite Structures , v. 68, p. 409-417, 2005.
MISHURIS, G ; ÖCHSNER, Andreas . Transmission conditions for a soft elasto-plastic interphase between two elastic materials. Plane strain state. Arch Mech, v. 57, n.2-3, p. 157-169, 2005.
MISZURIS, W ; ÖCHSNER, Andreas . Refinement in the Mathematical and Numerical Treatment of the Internal Oxidation of Alloys. Diffusion and Defect Data, Solid State Data. Part A, Defect and Diffusion Forum , n.237-240, p. 1157-1162, 2005.
ÖCHSNER, Andreas ; GEGNER, J ; GRÁCIO, J . Quantitative Determination of Microstructural Inhomogeneity for Directional Particle Distribution. Praktische Metallographie , v. 42, n.3, p. 116-125, 2005.
ÖCHSNER, Andreas ; KUHN, G . Zweiachsiges Testen moderner Leichtbauwerkstoffe [Biaxial Testing of Modern Lightweight Materials]. Technik In Bayern, v. 2, n.8, p. 43-43, 2004.
ÖCHSNER, Andreas ; KUHN, G . Biaxial-Prüfeinrichtung für zellulare Metalle [Biaxial Testing Machine for Cellular Metals]. Konstruktion, n.11/12, p. 85-89, 2004.
ÖCHSNER, Andreas ; GEGNER, J . Critical Analysis of the Substrate Deformation Correction in the Thick-Adherend Tensile Shear Test. International Journal Of Adhesion And Adhesives, v. 24, n.1, p. 37-41, 2004.
GEGNER, J ; ÖCHSNER, Andreas . Through Thick and Thin Performing Lap Shear Tests of Adhesives. Adhesives Sealants Industry, v. 11, n.2, p. 18-22, 2004.
ÖCHSNER, Andreas ; GEGNER, J . Destructive Testing of Adhesively Bonded Joints Under Static Tensile Loading. Adhesion And Interface, v. 5, n.2, p. 22-30, 2004.
ÖCHSNER, Andreas ; GEGNER, J ; GRÁCIO, J . Analytic Adherend Deformation Correction in the New ISO 11003-2 Standard: Should it Really be Applied?. Adhesion And Interface, v. 5, n.2, p. 14-21, 2004.
ÖCHSNER, Andreas ; GEGNER, J ; MISHURIS, G . Effect of Discordant Diffusivity Expressions on Calculated Carburizing Penetration Curves (in Russian). Metalovedenie i Termicheskaya Obrabotka Metallov , v. 4, p. 13-16, 2004.
GEGNER, J ; HENNINGER, C ; ÖCHSNER, Andreas . Stereologische Analyse und Modellierung von Objektverteilungen aus Schnittbildern [Stereologic Analysis and Modelling of Object Distributions from Sectional Micrographs]. Materialwissenschaft und Werkstofftechnik , v. 35, n.1, p. 36-44, 2004.
ÖCHSNER, Andreas ; GEGNER, J ; MISHURIS, G . Effect of Diffusivity as a Function of the Method of Computation of Carbon Concentration Profiles in Steel. Metal Science And Heat Treatment, v. 46, n.3-4, p. 148-151, 2004.
ÖCHSNER, Andreas ; LAMPRECHT, K . On the Uniaxial Compression Behavior of Regular Shaped Cellular Metals. Mechanics Research Communications , v. 30, n.6, p. 573-579, 2003.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . On an Elastic-Plastic Transition Zone in Cellular Metals. Arch Appl Mech, v. 73, n.3-4, p. 261-269, 2003.
GEGNER, J ; ÖCHSNER, Andreas . Numerik contra Analytik Konkurrierende Methoden der mathematischen Fügeteilkorrektur [Numerics Contra Analytics Competing Methods in the Mathematical Adherend Deformation Correction]. Adhäsion Kleben Und Dichten, v. 47, n.11, p. 41-44, 2003.
GEGNER, J ; NIERLICH, W ; WILBRANDT, P ; KIRCHHEIM, R ; ÖCHSNER, Andreas . Charakterisierung von Randentkohlungsvorgängen bei der Austenitisierung des Wälzlagerstahls 100Cr6, Teil 1: Korrelation zwischen Randschichteigenschaften und Kohlenstoff-Tiefenverlauf [Characterization of Decarburisation Processes During Austenitising of the Rolling Bearing Steel 100Cr6 Part 1: Correlation between RimZone Properties and Carbon Concentration Profile]. Materialwissenschaft und Werkstofftechnik , v. 34, n.8, p. 701-710, 2003.
GEGNER, J ; ÖCHSNER, Andreas ; WILBRANDT, P ; KIRCHHEIM, R ; NIERLICH, W . Charakterisierung von Randentkohlungsvorgängen bei der Austenitisierung des Wälzlagerstahls 100Cr6, Teil 2: Modellierung des Kohlenstoff-Tiefenverlaufs mit Hilfe der Methode der Finiten Elemente [Characterization of Decarburisation Processes During Austenitising of the Rolling Bearing Steel 100Cr6 Part 2: Modelling of the Carbon Concentration Profile by Means of the Finite Element Method]. Materialwissenschaft und Werkstofftechnik , v. 34, n.8, p. 711-720, 2003.
GEGNER, J ; ÖCHSNER, Andreas ; WILBRANDT, P ; KIRCHHEIM, R ; NIERLICH, W . Ein neues Simulationswerkzeug zur Berechnung von Kohlenstoff-Tiefenverläufen - Vorhersage und Analyse von Aufkohlungs- und Randentkohlungsprofilen [A New Simulation Tool for the Calculation of Carbon Penetration Curves Prediction and Analysis of Carburization and Decarburization Profiles]. Härtereitechnische Mitteilungen, v. 58, n.1, p. 5-12, 2003.
ÖCHSNER, Andreas ; HENNINGER, C ; GEGNER, J . Modellierung mikroskopischer Objektverteilungen mittels eines stochastischen Suchverfahrens [Modelling of Microscopic Object Arrangements by Means of a Stochastic Search Method]. Austrian Journal Of Statistics, v. 32, n.4, p. 297-304, 2003.
GEGNER, J ; ÖCHSNER, Andreas ; HENNINGER, C . 2D and 3D Modelling of Discontinuous Dual-Phase Structures and Equivalent Microstructures from Microscope-Made Image Series . Praktische Metallographie , v. 40, n.11, p. 564-581, 2003.
HEYDER, M ; ÖCHSNER, Andreas ; STRÖHLA, S . Bewertung von Spannungszuständen bei der experimentellen Bestimmung des Schubmoduls an zellularen Metallen [Evaluation of Stress States for the Experimental Determination of the Shear Modulus of Cellular Materials]. Materialwissenschaft und Werkstofftechnik , v. 33, n.2, p. 85-89, 2002.
ÖCHSNER, Andreas ; GEGNER, J ; WINTER, W ; KUHN, G . Experimentelle und numerische Untersuchungen zum mechanischen Verhalten perforierter Aluminium-Legierungen unter zyklischer Belastung [Experimental and Numerical Investigation of the Mechanical Behaviour of Perforated Aluminium Alloys under Cyclic Loading]. Materialwissenschaft und Werkstofftechnik , v. 33, n.11, p. 637-642, 2002.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Elastic-plastic Behaviour of Perforated Aluminium under Tension and Compression. Technische Mechanik, v. 21, n.2, p. 101-108, 2001.
ÖCHSNER, Andreas ; GEGNER, J ; WINTER, W ; KUHN, G . Experimental and Numerical Investigations of Ductile Damage in Aluminium Alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 318, n.1-2, p. 328-333, 2001.
GEGNER, J ; ÖCHSNER, Andreas . A New Powerful Tool for Testing Adhesives In Situ. Journal of Testing and Evaluation , v. 29, n.2, p. 115-160, 2001.
GEGNER, J ; ÖCHSNER, Andreas . Klebschichtkennwerte aus Experiment und Simulation [Adhesive Bonding Layer Properties - Calculated and Experimentally Determined]. Materialprüfung (München) , v. 43, n.3, p. 64-71, 2001.
ÖCHSNER, Andreas ; GEGNER, J . Application of the Finite Element Method in the Tensile-Shear Test of Adhesive Technology. International Journal Of Adhesion And Adhesives, v. 21, n.4, p. 349-353, 2001.
GEGNER, J ; ÖCHSNER, Andreas . Digital Image Analysis in Quantitative Metallography. Praktische Metallographie , v. 38, n.9, p. 499-513, 2001.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Damage and Fracture of Perforated Aluminum Alloys. Advanced Engineering Materials , v. 2, n.7, p. 423-426, 2000.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Perforierte Aluminium-Legierungen als Modell für Schädigung und Bruch in zellularen Metallen [Perforated Aluminum Alloys as Model for Damage and Cracks in Cellular Metals]. Materialwissenschaft und Werkstofftechnik , v. 31, n.6, p. 567-570, 2000.
GEGNER, J ; ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Metallographical Investigations of Ductile Damage in Aluminium Alloys. Praktische Metallographie , v. 37, n.10, p. 563-579, 2000.
GEGNER, J ; ÖCHSNER, Andreas . Verbesserte Methode der Kennwertbestimmung [Improved Method for the Identification of Characteristic Values]. Adhäsion Kleben Und Dichten, v. 44, n.4, p. 18-23, 2000.
GEGNER, J ; ÖCHSNER, Andreas ; BUSL, K . Vereinfachte Bestimmung der elastischen Konstanten [Simplified Identification of the Elastic Constants]. Adhäsion Kleben Und Dichten, v. 44, n.9, p. 36-39, 2000.
GEGNER, J ; ÖCHSNER, Andreas ; BUSL, K . Neue Mess- und Auswerteverfahren im simulationsgestützten Zugscherversuch der Klebetechnik [New Measuring and Analysis Methods for the Simulation-Aided Tensile Shear Test of Adhesives]. Technishes Messen, v. 67, n.9, p. 381-386, 2000.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Verformungs- und Dehnungsfeldermittlung an zellularen Werkstoffen mittels Rasterverfahren [Deformation and strain field measurements of cellular materials based on the grating method]. Technishes Messen, v. 66, n.10, p. 386-389, 1999.
ÖCHSNER, Andreas . Experimental and Numerical Investigations of the Elastic-Plastic Properties of Model Cellular Materials. 282. ed. Duesseldorf: VDI-Verlag, 2003. v. 1. 140p .
ÖCHSNER, Andreas ; FIEDLER, T ; GRÁCIO, J ; KUHN, G . Experimental Techniques for Investigation of the Elasto-Plastic Transition Zone of Porous Materials.. In: MetFoam 2005 (21-23.9.2005, Kyoto, Japan)., 2006, Kyoto. Proceedings of the 4th Int. Conf. on Porous Metals and Metal Foaming Technology - MetFoam 2005. Sendai: Hideo Nakajima, Naoyuki Kanetake. p. 457-462.
ÖCHSNER, Andreas ; STASIEK, M ; MISHURIS, G ; GRÁCIO, J . A new procedure for the determination of the complete set of linear elastic constants of thin adhesive layers.. In: 20th International Symposium Swiss Bonding 06, 2006, Rapperswil. Proceedings of the 20th International Symposium Swiss Bonding 06.
VESENJAK, M ; REN, Z ; ÖCHSNER, Andreas . Simulating Filler Effects in Cellular Structures. In: Sustainability for Humanity & Environment in the Extended Connection Field Science, 2005, Timisoara, 2005. p. 159-162.
ÖCHSNER, Andreas ; KUHN, G ; GRÁCIO, J . Determination of the Plastic Material Properties of Cellular and Porous Media due to Biaxial Stress States. In: Proceedings of the 3rd International, 2005, Nuremberg, 2005. p. 105-110.
ÖCHSNER, Andreas ; VESENJAK, M ; MISHURIS, G ; REN, Z ; GRÁCIO, J . Numerical investigation of cellular metals under consideration of internal pore pressure: small and large displacement approaches. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Czestochowa, 2005.
ÖCHSNER, Andreas ; VESENJAK, M ; MISHURIS, G ; REN, Z ; GRÁCIO, J . On the Influence of the Internal Pore Pressure on the Elasto-Plastic Behaviour of Cellular and Porous Materials. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Erlangen, 2005. p. 177-186.
VESENJAK, M ; ÖCHSNER, Andreas ; REN, Z . Behaviour of Closed-Cell Foams under Impact. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Erlangen, 2005. p. 195-204.
GROMADA, M ; MISHURIS, G ; ÖCHSNER, Andreas . On the determination of the effective thermal conductivity of composite materials. In: Workshop on Advanced Computational Mechanics, 2005, Erlangen, 2005. p. 187-194.
GROMADA, M ; MISHURIS, G ; ÖCHSNER, Andreas . On the axisymmetric tensile test: are there improvements of the Bridgman and Davidenkov-Spiridonova formulae possible?. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Erlangen, 2005. p. 53-62.
FIEDLER, T ; PESETSKAYA, e ; ÖCHSNER, Andreas ; GRÁCIO, J . Numerical and Analytical Calculation of the Orthotropic Heat Transfer Properties of Fibre Reinforced Materials. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Aveiro, 2005. p. 235-240.
PESETSKAYA, e ; FIEDLER, T ; ÖCHSNER, Andreas ; GRÁCIO, J . Analytical Investigation of Thermal Characteristics of Composites with Different Topology: Effect of Perturbations. In: Proceedings of the 16th International Conference on Computer Methods, 2005, Aveiro, 2005. p. 545-550.
VESENJAK, M ; REN, Z ; ÖCHSNER, Andreas . Influence of closed cell pressure on the macroscopic properties of the cellular material (in Slovenian). In: Proceedings of Kuhelj s days 2005., 2005, Pod cetrtek, 2005. p. 311-318.
ÖCHSNER, Andreas ; GRÁCIO, J . Errors Connected with the Evaluation of the Tensile Butt-Joint Test of Adhesive Technology. In: Proceedings of the 3rd International Conference on Materials Testing (Test 2005),, 2005, Nuremberg, 2005. p. 123-128.
VESENJAK, M ; ZUNIC, Z ; ÖCHSNER, Andreas ; HRIBERSEK, M ; REN, Z . Parametric Analysis of Heat Transfer in Closed-Cell Cellular Metals. In: Proceedings of the First International Conference on Diffusion in Solids and Liquids, 2005, Aveiro, 2005. p. 793-798.
ÖCHSNER, Andreas ; FIEDLER, T ; GRÁCIO, J . On the experimental realisation of multi-axial stress states for cellular and porous materials: determination of elasto-plastic properties. In: Procedings of COBEM 2005, 18th International Congress of Mechanical Engineering, 2005, Ouro Preto, 2005.
CUNHA, L A B da ; ÖCHSNER, Andreas ; CREUS, G J . Damage in metallic foams. In: Proceedings of the XXVI Iberian Latin-American Congress on Computational Methods in Engineering CILAMCE 2005, 2005, Guarapari, 2005.
GROMADA, M ; MISHURIS, G ; ÖCHSNER, Andreas . Evaluation of Material Properties from Axisymmetric Tensile Samples: Remarks on Error Estimate. In: Proceedings of the 3rd International Conference on Materials Testing (Test 2005), 2005, Nuremberg, 2005. p. 129-134.
MISHURIS, G ; ÖCHSNER, Andreas . Influence of material parameters on the deformed edge shape of thin elastic interphases. In: Proceedings of the 16th International Conference on Computer Methods in Mechanics CMM-2005, 2005, Czestochowa, 2005.
MISHURIS, G ; MISZURIS, W ; ÖCHSNER, Andreas . Evaluation of Transmission Conditions for Thin Elasto-Plastic Interfaces. In: Proceedings of the 2. Workshop on Advanced Computational Mechanics, 2005, Erlangen, 2005. p. 43-52.
ÖCHSNER, Andreas ; STASIEK, M ; GRÁCIO, J . Numerical Simulation of the Segregation of Oxygen at Metal/Oxide-Interfaces. In: Progress in Computational Heat and Mass Transfer (Proceedings ings ICHMT), 2005, Paris, 2005. p. 1032-1034.
STASIEK, M ; ÖCHSNER, Andreas ; GRÁCIO, J . Segregation of Oxygen at Metal/Oxide-Interfaces: Effect of Kinetics and Precipitate Distribution. In: Proceedings of the First International Conference on Diffusion in Solids and Liquids, 2005, Aveiro, 2005. p. 723-726.
ÖCHSNER, Andreas ; STASIEK, M ; GRÁCIO, J . Numerical simulation of carburization and decarburization profiles in steels. In: Proceedings of the International Conference on Surfaces, Coatings and Nanostructured Materials - nanoSMat2005, 2005, Aveiro, 2005. p. O-60-O-62.
VESENJAK, M ; ÖCHSNER, Andreas ; REN, Z . Influence of Pore Gas in Closed-Cell Cellular Structures under Dynamic Loading.. In: 4th German LS-DYNA Forum, 2005, Bamberg. Conference Proceedings of the 4th German LS-DYNA Forum.
ÖCHSNER, Andreas ; GRÁCIO, J . Effective Thermal Conductivity of Syntactic Metal foams. In: Proceedings of the International Conference on Applications of Porous Media ICAPM, 2004, Évora, 2004. p. 409-416.
ÖCHSNER, Andreas ; MISHURIS, G ; GRÁCIO, J . Macroscopic Behaviour of Porous Metals with Internal Gas Pressure under Multiaxial Loading Conditions (Invited Lecture). In: Proceedings of the International Conference on Applications of Porous Media ICAPM, 2004, Ariel, 2004. p. 3-68-3-77.
GROMADA, M ; MISHURIS, G ; ÖCHSNER, Andreas . Critical Analysis of the Evaluation of Plastic Material Properties Obtained from Standard Round Tensile Specimens. In: Proceedings of the International Conference on Applications of Porous Media ICAPM, 2004, Ariel, 2004. p. 3-78-3-87.
ÖCHSNER, Andreas ; GEGNER, J ; GRÁCIO, J . Analytic Adherend Deformation in the New ISO 11003- 2 Standard: Should it Really be Applied ? (Invited Lecture). In: Proceedings of the 18. International Congress HSR Rapperswil Swiss Bonding 04, 2004, Rapperswil, 2004. p. 260-266.
ÖCHSNER, Andreas ; PEREIRA, A B ; MORAIS, A B de . Strength of Adhesively Bonded Steel Joints (Abstract). In: Proceedings of the 18. International Congress HSR Rapperswil Swiss Bonding 04, 2004, Rapperswil, 2004. p. 378-378.
GEGNER, J ; ÖCHSNER, Andreas . Destructive Testing of Adhesively Bonded Joints Under Static Tensile Loading (Invited Lecture). In: Proceedings of the 18. International Congress HSR Rapperswil Swiss Bonding 04, 2004, Rapperswil, 2004. p. 250-257.
ÖCHSNER, Andreas ; MISHURIS, G ; GRÁCIO, J . Imperfect Transmission Conditions for Thin Glue Layers and Edge Effects in Adhesively Bonded Joints. In: Proceedings of the 2004 Beijing International Bonding Technology Symposium (China Swiss Bonding 04), 2004, Beijing, 2004. p. 1-10.
GEGNER, J ; ÖCHSNER, Andreas . Destructive Testing of Adhesively Bonded Joints Under Static Tensile Loading (Invited Lecture).. In: Proceedings of the 18. International Congress HSR Rapperswil Swiss Bonding 04, 2004, Rapperswil, 2004. p. 250-257.
GROMADA, M ; MISHURIS, G ; ÖCHSNER, Andreas . Numerical Estimate of Error Connected with the Application of Imperfect Transmission Conditions in Composite Materials. In: Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004), 2004, Ariel, 2004. p. 3-58-3-67.
ÖCHSNER, Andreas ; MISZURIS, W ; GRÁCIO, J . Finite Difference Scheme for the Simulation of the Internal Oxidation of Metal Alloys. In: Proceedings of the Third International Conference on Mathematical Modeling and Computer Simulation of Materials Technology (MMT-2004), 2004, Ariel, 2004. p. 1-46-1-53.
ÖCHSNER, Andreas ; HEYDER, M ; GEGNER, J . Fracture Mechanics Analysis of Rim Zone Tensile Residual Stress States. In: MATERIAS WEEK 2002, 2003, Frankfurt. Werkstoff-Informationsgesellschaft mbH, 2002.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Simulation of the Elastic-Plastic Transition Region of Cellular Metals. In: MATERIAS WEEK 2002, 2003, Frankfurt. Werkstoff-Informationsgesellschaft mbH, 2002.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . FE-Simulation of the Elastic-Plastic Transition Zone of Cellular Metals under Complex Loading Conditions. In: International Conference on Computer Methods in Mechanics CMM-2003, 2003, Wisla, 2003.
ÖCHSNER, Andreas . On the Determination of the Elastic-Plastic Transition Zone of Cellular Metals. In: Workshop on Advanced Computational Mechanics, 2003, Maribor, 2003. p. 111-120.
HITZEGRAD, F ; BERGER, G ; PLOSKA, U ; ÖCHSNER, Andreas . Comparison of Static and Dynamical Analysis of Material Properties of Open-Cell ZrO2 Foams. In: MATERIALS WEEK 2002 Proceedings, 2003, Frankfurt. Werkstoff-Informationsgesellschaft, 2003.
GEGNER, J ; ÖCHSNER, Andreas . Materials Properties of Open- Cell Al2O3 Foams - Comparison of Static and Dynamic Analyses and Rheological Modelling. In: Proceedings of the 2nd International Conference on Material Testing (Test 2003), 2003, Nuremberg, 2003. p. 193-198.
ÖCHSNER, Andreas ; GEGNER, J . Improvement of Substrate Deformation Correction in the ISO Adhesive Tensile-Shear Test. In: Proceedings of the 2nd International Conference on Material Testing (Test 2003), 2003, Nuremberg, 2003. p. 231-235.
GEGNER, J ; ÖCHSNER, Andreas . Theoretical Expressions for the Porosity Dependence of Ceramics Characteristics and Comparison with Experiment. In: Proceedings of the 2nd International Conference on Material Testing (Test 2003), 2003, Nuremberg, 2003. p. 221-226.
MISHURIS, G ; ÖCHSNER, Andreas ; KUHN, G . Imperfect Interfaces in Dissimilar Elastic Body: FEM Analysis. In: Proceedings of the 1. Workshop on Advanced Computational Mechanics, 2003, Maribor, 2003. p. 101-110.
ÖCHSNER, Andreas ; GEGNER, J . A New Versatile Simulation Tool for Thermochemical Reactions. In: MATERIALS WEEK 2002 Proceedings, 2003, Frankfurt. Werkstoff-Informationsgesellschaft mbH, 2003.
ÖCHSNER, Andreas ; GEGNER, J . Automatized Evaluation of Decarburization Profiles for the Determination of Carbon Diffusivities in Steels. In: Proceedings of the 2nd International Conference on Material Testing (Test 2003), 2003, Nuremberg, 2003. p. 243-248.
ÖCHSNER, Andreas ; WINTER, W ; KUHN, G . Perforated Aluminum-Alloys as a Model for the Nonlinear Behavior of Cellular Metals. In: Conference Proceedings EUROMAT 2001, 2001, Rimini, 2001.
VESENJAK, M ; ÖCHSNER, Andreas ; REN, Z . Evaluation of Thermal and Mechanical Filler Gas Influence on Honeycomb Structures Behavior.. Materials Science Forum , 2007.
VESENJAK, M ; ZUNIC, Z ; ÖCHSNER, Andreas ; REN, Z . Thermal post-impact behavior of closed-cell cellular structures with fillers Part II.. Materials Science Forum , 2007.
VESENJAK, M ; ÖCHSNER, Andreas ; REN, Z . Thermal post-impact behavior of closed-cell cellular structures with fillers Part I.. Materials Science Forum , 2007.
FIEDLER, T ; ÖCHSNER, Andreas ; GRÁCIO, J . Influence of the morphology of joining on the heat transfer properties of periodic metal hollow-sphere-structures.. Materials Science Forum , 2007.
FIEDLER, Thomas ; ÖCHSNER, Andreas ; GRÁCIO, J . On the thermal conductivity of adhesively bonded and sintered hollow sphere structures (HSS).. Materials Science Forum , 2007.
PESETSKAYA, e ; FIEDLER, Thomas ; ÖCHSNER, Andreas ; GRÁCIO, J . Two different approaches for the effective conductivity investigation of 2D porous materials with temperature dependent material properties.. Materials Science Forum , 2007.
PESETSKAYA, e ; ÖCHSNER, Andreas ; Rogosin S. ; GRÁCIO, J . The effective conductivity of 2D porous materials with temperature dependent material properties.. Materials Science Forum , 2007.
STASIEK, M ; ÖCHSNER, Andreas . Numerical Simulation of Carburization and Decarburization Profiles in Steels.. Diffusion and Defect Data, Solid State Data. Part A, Defect and Diffusion Forum , 2007.
STASIEK, M ; ÖCHSNER, Andreas . Ad- and Desorption of Oxygen at Metal-Oxide Interfaces: Numerical Approach for Concentration-Dependent Diffusion Coe cient.. Diffusion and Defect Data, Solid State Data. Part A, Defect and Diffusion Forum , 2007.
MISHURIS, G ; MISZURIS, W ; ÖCHSNER, Andreas . G. Mishuris, W. Miszuris, A. Öchsner: Finite Element Veri cation of Transmission Conditions for 2D Heat Conduction Problems.. Materials Science Forum , 2007.
MISHURIS, G ; MISZURIS, W ; ÖCHSNER, Andreas . Evaluation of Transmission Conditions for a Thin Heat-Resistant Inhomogeneous Interphase in Dissimilar Material.. Materials Science Forum , 2007.
FIEDLER, T ; ÖCHSNER, Andreas ; Muthubandara N. ; Belova I.V. ; Murch G.E. . Calculation of the Effective Thermal Conductivity in Composites Using Finite Element and Monte Carlo Methods.. Materials Science Forum , 2007.
FIEDLER, Thomas ; ÖCHSNER, Andreas ; GRÁCIO, J . Numerical Investigations on the Mechanical Properties of Adhesively Bonded Hollow Sphere Structures.. Journal of Composite Materials , 2006.
ÖCHSNER, Andreas ; FIEDLER, T ; GRÁCIO, J ; KUHN, G . Experimental Techniques for the Investigation of the Elasto-Plastic Transition Zone of Foamed Materials.. Advanced Engineering Materials , 2006.
ÖCHSNER, Andreas ; STASIEK, M ; GRÁCIO, J . Ad- and Desorption of Oxygen at Metal-Oxide Interfaces: Two-Dimensional Modelling Approaches.. Journal of Phase Equilibria and Diffusion , 2006.
MISHURIS, G ; ÖCHSNER, Andreas ; KUHN, G . FEM-analysis of nonclassical transmission conditions between elastic structures. Part 2: Stiff imperfect interface.. CMC-Computers Materials & Continua , 2006.
MISHURIS, G ; ÖCHSNER, Andreas . 2D modelling of a thin elasto-plastic interphase between two different materials: Plane strain case.. Composite Structures , 2006.
ÖCHSNER, Andreas ; GRÁCIO, J . An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates.. International Journal of Adhesion and Adhesives , 2006.

Projetos de pesquisa

2006 - 2007

National coordinator of bilateral cooperation between Portugal and Slovenia on Computational Modelling of Cellular Materials under Impact Conditions, Descrição: Funded by the Portuguese Ministry of Science, Technology and Higher Education (GRICES). , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (2) Doutorado: (1) . , Integrantes: Andreas Öchsner - Coordenador.
2006 - Atual

National coordinator of bilateral cooperation between Portugal and Russia on Working of Production Technology of Metallized Product and Quality Steel from Siderites of Bakal Deposit, Descrição: Funded by the Portuguese Ministry of Science, Technology and Higher Education (GRICES).. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (2) Doutorado: (1) . , Integrantes: Andreas Öchsner - Coordenador.
2005 - 2007

Coordinator of a national research project on 'Experimental and Numerical Investigation of Metal Foam-Based Composite Structures'., Descrição: Pequisa Numérica e Experimantal de Estruturas Compostas Baseadas em Espumas Metálicas. Funded by Portuguese Foundation of Science and Technology (FCT).. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (0) / Especialização: (0) / Mestrado acadêmico: (2) / Mestrado profissional: (0) / Doutorado: (1) . , Integrantes: Andreas Öchsner - Coordenador.
2005 - Atual

Investigation of Damage Evolution in Metallic Foams, Descrição: Análise da Evolução do Dano em Espumas Metálicas. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (0) / Especialização: (0) / Mestrado acadêmico: (0) / Mestrado profissional: (0) / Doutorado: (0) . , Integrantes: Andreas Öchsner - Coordenador.
2004 - 2005

National coordinator of bilateral cooperation between Portugal and Slovenia on 'Computational modelling of heterogeneous engineering materials'., Descrição: Funded by the Portuguese Ministry of Science, Technology and Higher Education (GRICES). , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (2) . , Integrantes: Andreas Öchsner - Coordenador.
2004 - 2004

Simulation of Composite Materials with Thin Nonlinear Intermediate Layers, Descrição: Simulação de Materiais Compostos com Camadas Intermediárias Não-Lineares. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (0) / Especialização: (0) / Mestrado acadêmico: (0) / Mestrado profissional: (0) / Doutorado: (0) . , Integrantes: Andreas Öchsner - Coordenador.

Prêmios

2006

Invited lecture at the 135th Annual Meeting & Exhibition - TMS 2006, San Antonio, USA, March 12-16, 2006, TMS.

2006

rant to invite a scientist for a short-time visit to Portugal., Portuguese Foundation of Science and Technology (FCT).

2006

BOLSAS DE ESTUDO DE CURTA DURAÇÃO NO ESTRANGEIRO, Liverpool University, Reino Unido, FUNDAÇÃO CALOUSTE GULBENKIAN.

2006

Marie Curie Scholarship for experienced researcher to attend a course at CISM, Udine, Italy, International Centre for Mechanical Sciences - CISM, Udine, Italy.

2006

Invited lecture and Chairman (Session: Application-Testing-Environment-Recycling) at the 20th International Symposium 'Swiss Bonding 06',, International Symposium Swiss Bonding 06.

2006

Member of the International Advisor Committee and Invited Lecture, Fourth Int. Conf. on Mathematical Modeling and Computer Simulation of Material Technology (MMT-2006).

2005

Invited presentation and Chairman at the 19th International Symposium 'Swiss Bonding 05', HSR Rapperswil, Switzerland, 2005, Swiss Bonding.

2005

Invited keynote lecture at the international workshop 'Diffusion in Solids: Past, Present and Future - DiSo-05', Moscow State Institute of Steel and Alloys, Russia.

2005

Invited lecture at the 2nd Workshop on Advanced Computational Mechanics, University of Erlangen-Nuremberg, Germany, 2005, Institute of Applied Mechanics, University of Erlangen-Nuremberg.

2005

Member of the International Advisory Committee of ICCHMT 2005, Fourth International Conferenceon on Computational Heat and Mass Transfer (4th ICCHMT), France.

2005

Grant to invite a scientist for a short-time visit to Portugal (Prof. Miszuris, Rzeszow University of Technology, Poland)., Portuguese Foundation of Science and Technology (FCT).

2005

Bolsa de Pós-doutorado (short-term) no Institute of Scentific and Industrial Research (Osaka University), Japan Society for the Promotion of Science (JSPS).

2004

Chairman of the session 'Thermodynamics and kinetics of high temperature processes'. Third International Conference on Mathematical Modeling and Computer Simulation of Material Technologies, Third Int. Conf. on Math. Modeling and Computer Simulation of Material Technology - MMT-2004.

2004

Invited lecture at the 2nd China Swiss Bonding, Beijing, China, 2004, China Swiss Bonding.

2004

Member of the International Advisor Committee and Invited Lecture at the Third Int. Conf. on Mathematical Modeling and Computer Simulation of Material Technologies, Third Int. Conf. on Math. Modeling and Computer Simulation of Material Technologies - MMT-2004.

2004

Invited lecture at the 18th International Symposium 'Swiss Bonding 04', HSR Rapperswil, Switzerland, 2004, Swiss Bonding.

2004

BOLSAS DE ESTUDO DE CURTA DURAÇÃO NO ESTRANGEIRO, London South Bank University, Reino Unido, FUNDAÇÃO CALOUSTE GULBENKIAN.

2003

Funding for German Academics to visit Research Institutions of Humboldtians abroad, Alexander von Humboldt Foundation (AvH), Germany.

2003

Award to attend the short course 'Nonlinear Finite Element Analysis' by T.J.R. Hughes & T. Belytschko in Paris, France, Deutsche Forschungsgemeinschaft DFG (German Research Foundation).

2003

Research Fellowship for two years, Deutsche Forschungsgemeinschaft DFG (German Research Foundation).

2003

Bolsa de Pós-doutorado Lee Kuan Yew (não aceita), National University of Singapore.

1990

Best High School Graduation, Gymnasium am Krebsberg.

1987

Book award, Chemical Industry Fund.

Histórico profissional

Endereço profissional

Universidade de Aveiro. , Campus Universitário de Santiago, 3810-193 - Aveiro, - Portugal, Telefone: (351) 234370830, Fax: (351) 234370953, URL da Homepage:

Experiência profissional

2003 - Atual

Universidade de Aveiro

Vínculo: Professor Assistente e Pesquis, Enquadramento Funcional: Professor Assistente / Pesquisador, Carga horária: 0

Atividades

Pesquisa e desenvolvimento , Departamento de Engenharia Mecânica, .,Linhas de pesquisa
Ensino, Engenharia Mecânica, Nível: Graduação,Disciplinas ministradas, Estática dos Corpos Rígidos, Elastostática e Resistência dos Materiais
Ensino, Engenharia Mecânica, Nível: Pós-Graduação,Disciplinas ministradas, Elementos Finitos, Mecânica do Contínuo, Transferência de Calor, Equações Diferenciais Parciais - Aproximação Discreta no Tempo, Plasticidade dos Materiais Avançada