Wenjie Yuan

Graduated in Materials Science and Engineering - Wuhan University of Technology (2002) and Ph.D. in Materials science - Wuhan University of Technology (2007). He is currently associate professor - Wuhan University of Science and Technology. He has experience in Materials and Metallurgical Engineering, with emphasis on Ceramics, acting on the following subjects: Refractories and high temperature ceramics.

Informações coletadas do Lattes em 04/11/2022

Acadêmico

Formação acadêmica

Doutorado em Materials science

2002 - 2007

Wuhan University of Technology
Título: Study on the process and principle of powder rolling technology for preparation of high silicon steel sheets
Orientador: Lianmeng Zhang

Graduação em Materials Science and Engineering

1998 - 2002

Wuhan University of Technology
Orientador: Xiaorong Xu

Pós-doutorado

2013 - 0000

Pós-Doutorado. , Universidade Federal de São Carlos, UFSCAR, Brasil. , Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico.

2007 - 2010

Pós-Doutorado. , Beihang University. , Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia de Transformação / Especialidade: Fundição. , Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física / Especialidade: Propriedades Mecânicas dos Metais e Ligas. , Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física / Especialidade: Propriedades Físicas dos Metais e Ligas.

Idiomas

Inglês

Compreende Razoavelmente, Fala Razoavelmente, Lê Bem, Escreve Razoavelmente.

Áreas de atuação

Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Materiais Não-Metálicos/Especialidade: Cerâmicos.

Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Propriedades Mecânicas dos Metais e Ligas.

Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Propriedades Físicas dos Metais e Ligas.

Produções bibliográficas

Yuan, W.J. ; J. Li ; C. Pan ; Chengji Deng ; H.X. Zhu . Synthesis of Al4SiC4 powders from kaolin grog, aluminum and activated carbon as raw materials. Advanced Materials Research , v. 399401, p. 788-791, 2012.
C. Yu ; Yuan, W.J. ; J. Li ; C. Pan ; H.X. Zhu ; Chengji Deng . Synthesis of Al4SiC4-Al8SiC7 composite powders by carbothermal reduction process. Advanced Materials Research , v. 399401, p. 813-816, 2012.
J. Li ; Yuan, W.J. ; S. Wang ; H.X. Zhu ; Chengji Deng . Effect of sintering temperatures on the reaction-bonded Si3N4/SiC composite ceramics. Advanced Materials Research , v. 399401, p. 331-335, 2012.
J.DING ; Yuan, W.J. ; J. Li ; H.X. Zhu ; Chengji Deng . Preparation and Hydration Resistance of MgO-MgAl2O4 Composite Refractory. Advanced Materials Research , v. 399401, p. 851-854, 2012.
S. Wang ; J. Li ; Yuan, W.J. ; H.X. Zhu ; Chengji Deng . Effect of sintering temperature and particle size on porous SiC/Si3N4 composite ceramics. Advanced Materials Research , v. 399401, p. 449-452, 2012.
H.X. Zhu ; Z.J. Lv ; Chengji Deng ; Yuan, W.J. . Fabrication of MgO-SiC Refractory Composite Powders by High-silicon Magnesite and Carbon Black Powders. Advanced Materials Research , v. 399401, p. 809-812, 2012.
H.J. Duan ; H.X. Zhu ; P. Liang ; Yuan, W.J. ; Chengji Deng . Synthesis of MgAl2O4-SiC-C Refractory Powders by Using Forsterite, Alumina and Carbon Black. Advanced Materials Research , v. 399401, p. 838-841, 2012.
J.DING ; Chengji Deng ; H.X. Zhu ; Yuan, W.J. ; J. Li . Preparation mechanism of lightweight forsterite materials in molten salt media. Bulletin of the Chinese Ceramic Society , v. 31, p. 123-127, 2012.
PENG, N. ; Chengji Deng ; Yuan, W.J. ; J. Li ; H.X. Zhu . Effect of Sintering Temperature on the Performance of a β-SiAlON Bonded Al2O3-C Refractory. Interceram , v. 2012, p. 112-115, 2012.
Yuan, W.J. ; P. Liang ; Chengji Deng ; H.X. Zhu . Effects of the atmosphere on synthesis of MgO-SiC-C refractory powders by using forsterite and carbon black. Interceram , v. 1, p. 56-58, 2011.
Chengji Deng ; L. Zhou ; H.X. Zhu ; J.DING ; Yuan, W.J. . Molten salt synthesis of forsterite heat insulation material. IOP Conference Series: Materials Science and Engineering , v. 18, p. 222012-1-4, 2011.
H.X. Zhu ; C. Pan ; Chengji Deng ; Yuan, W.J. . Preparation of Al8B4C7 composite materials by using oxide raw materials. IOP Conference Series: Materials Science and Engineering , v. 18, p. 222008-1-4, 2011.
Chengji Deng ; C. Yu ; H.X. Zhu ; J.L. Kuang ; Yuan, W.J. . Effect of Al on Al4SiC4-Al4O4C composite synthesized from kaolinite grog. Refractories , v. 45, p. 170-173, 2011.
Yuan, W.J. ; Liu, F.J. ; Zhang, T. . Frequency and magnetic field dependences of coercivity and core loss in Fe Mo Si P C B amorphous alloys. Journal of Alloys and Compounds , v. 504, p. S142-S145, 2010.
H.X. Zhu ; C. Pan ; Chengji Deng ; Yuan, W.J. . Sintering mechanism of Al4SiC4 refractory produced by oxide raw material. Journal of Materials Engineering , v. Suppl2, p. 454-457, 2010.
Yuan, W.J. ; Chengji Deng ; H.X. Zhu ; Shen, Q. ; Zhang, L.M. . Alternating current magnetic properties of Fe-6.5%Si steel sheets. Journal of Wuhan University of Science and Technology , v. 33, p. 548-552, 2010.
Yuan, W.J. ; Liu, F.J. ; Pang, S.J. ; Song, Y.J. ; Zhang, T. . Core loss characteristics of Fe-based amorphous alloys. Intermetallics (Barking) , v. 17, p. 278-280, 2009.
Yuan, W.J. ; Li, J.G. ; Shen, Q. ; Zhang, L.M. . A study on magnetic properties of high Si steel obtained through powder rolling processing. Journal of Magnetism and Magnetic Materials , v. 320, p. 76-80, 2008.
Li, J.G. ; Yuan, W.J. ; Y. Zhou ; Zhang, L.M. . Effect of Sn on the sintering of Fe-Si alloys. Key Engineering Materials , v. 368372, p. 1591-1592, 2008.
Yuan, W.J. ; Li, R. ; Shen, Q. ; Zhang, L.M. . Characterization of the evaluation of the solid solubility of Si in sintered Fe Si alloys using DSC technique. Materials Characterization , v. 58, p. 376-379, 2007.
Shen, Q. ; Li, R. ; Yuan, W. J. ; Zhang, L. M. ; Zhang, T. . Powder reaction mechanism in fabrication of high silicon iron alloy. Powder Metallurgy , v. 50, p. 336-340, 2007.
Shen, Q. ; Y. Zhou ; Li, J.G. ; Yuan, W.J. ; Zhang, L.M. . Sintering behavior of Fe-Si composite powder by DPR technique. Key Engineering Materials , v. 336338, p. 2344-2346, 2007.
Yuan, W.J. ; Shen, Q. ; Zhang, L.M. . Research on Fe-6.5%Si silicon steel produced by powder rolling technique. Powder Metallurgy Technology , v. 25, p. 32-34, 2007.
Yuan, W.J. ; Li, J.G. ; Shen, Q. ; Zhang, L.M. . Research on uniformity and properties of Fe-6.5%Si powders. China Powder Science and Technology , v. 13, p. 18-20, 2007.
Yuan, W.J. ; Li, J.G. ; Shen, Q. ; Zhang, L.M. . Study on the empirical electron theory of Fe-Si binary alloys. Journal of University of Science and Technology Beijing , v. 28, p. 520-522, 2006.
Zhang, L.M. ; Yuan, W.J. ; Shen, Q. ; Zhang D.M. . Formation of Fe-6.5wt%Si sheets by powder rolling and sintering. Key Engineering Materials , v. 280-3, p. 1713-1715, 2005.
S. Li ; X.Y. He ; T.J. Zhang ; Yuan, W.J. . Microstructures of W-Mo-Ti FGM with density gradient. Journal of Materials Science and Engineering , v. 22, p. 20-23, 2004.
Zhang, L.M. ; Yuan, W.J. ; Shen, Q. ; Zhang D.M. . Microstructure of Fe-6.5wt%Si composite powders prepared by mechanical alloying. Key Engineering Materials , v. 249, p. 303-306, 2003.
S. Li ; X.R. Xu ; Yuan, W.J. . Microstructures of W-Mo FGM with density gradient. Journal of Wuhan University of Technology (Transportation Science & Engineering) , v. 26, p. 777-779, 2002.
J.DING ; Chengji Deng ; Yuan, W.J. ; H.X. Zhu ; J. Li . The synthesis of titanium nitride whiskers on the surface of graphite by molten salt media. Ceramics International , 2013.
FAN, M. ; Yuan, W.J. ; Chengji Deng ; H.X. Zhu . The effects of process parameters on the microstructure of hydroxyapatite by calcined the fish scales. Journal of Ceramics , 2013.
Q.Y. Zhu ; Yuan, W.J. ; H.X. Zhu ; Chengji Deng . Investigation on the bending strength distribution of MgO-C refractories. Refractories , 2012.
B. Xu ; Yuan, W.J. ; Chengji Deng ; H.X. Zhu ; J.DING ; H.J. Duan . Calculation of valence electron structure and bond network analysis of forsterite. Acta Mineralogical Sinica , 2012.
J.DING ; Chengji Deng ; Yuan, W.J. ; H.X. Zhu ; J. Li . Preparation of porous TiC/C ceramics using a wooden template in molten salt media. Advances in Applied Ceramics (Print) , 2012.

Prêmios

2011

3rd class of Scientific and Technological Progress Award of Shandong Province, Government of Shandong Province, China.

2011

Advisor Award for Excellent Bachelor Degree Thesis of Hubei Province, China, Degree Committee of People's Government and Department of Education of Hubei Province, China.

2009

1st class of Scientific and Technological Progress Award of Zibo City, Government of Zibo, Shandong Province, China.

2008

Outstanding Doctor Thesis of Wuhan University of Technology, Wuhan University of Technology, China.

2005

Excellent Graduate Scientific Research Achievement Award of Wuhan University of Technology, Wuhan University of Technology, China.

Histórico profissional

Endereço profissional

Universidade Federal de São Carlos, Centro de Ciências Exatas e de Tecnologia, Departamento de Engenharia de Materiais. , Edifício Alcoa,Materials Engineering Department, Federal University of Sao Carlos,Rod.Washington Luiz km 235, Jardim Guanabara, 13565905 - São Carlos, SP - Brasil - Caixa-postal: 676, Telefone: (5516) 33518253

Experiência profissional

2013 - Atual

Universidade Federal de São Carlos

Vínculo: Scholarship, Enquadramento Funcional: Postdoc, Carga horária: 40

2010 - 2011

Wuhan University of Science and Technology

Vínculo: Formal labor contract, Enquadramento Funcional: Lecturer, Regime: Dedicação exclusiva.

2007 - 2010

Beihang University

Vínculo: Scholarship, Enquadramento Funcional: Postdoctor, Regime: Dedicação exclusiva.