Mohammad Malekan

Pós-doutorado

Idiomas

Áreas de atuação

Participação em eventos

Participação em bancas

Orientou

Produções bibliográficas

• MALEKAN, MOHAMMAD ; KHOSRAVI, ALI ; ZHAO, XIAOWEI . The influence of magnetic field on heat transfer of magnetic nanofluid in a double pipe heat exchanger proposed in a small-scale CAES system. APPLIED THERMAL ENGINEERING , v. 146, p. 146-159, 2019.

• KHOSRAVI, ALI ; MALEKAN, MOHAMMAD ; ASSAD, MAMDOUH E.H. . Numerical analysis of magnetic field effects on the heat transfer enhancement in ferrofluids for a parabolic trough solar collector. RENEWABLE ENERGY , v. 134, p. 54-63, 2019.

• KHOSRAVI, A. ; SYRI, SANNA ; ASSAD, M.E.H. ; MALEKAN, M. . Thermodynamic and economic analysis of a hybrid ocean thermal energy conversion/photovoltaic system with hydrogen-based energy storage system. ENERGY , v. 172, p. 304-319, 2019.

• KHOSRAVI, ALI ; MALEKAN, MOHAMMAD . Effect of the magnetic field on the heat transfer coefficient of a Fe3O4-water ferrofluid using artificial intelligence and CFD simulation. European Physical Journal Plus , v. 134, p. 88, 2019.

• MALEKAN, MOHAMMAD ; SILVA, LEANDRO L. ; BARROS, FELICIO B. ; PITANGUEIRA, ROQUE L.S. ; PENNA, SAMUEL S. . Two-dimensional fracture modeling with the generalized/extended finite element method: An object-oriented programming approach. ADVANCES IN ENGINEERING SOFTWARE , v. 115, p. 168-193, 2018.

• MALEKAN, MOHAMMAD ; KHOSRAVI, ALI . Investigation of convective heat transfer of ferrofluid using CFD simulation and adaptive neuro-fuzzy inference system optimized with particle swarm optimization algorithm. POWDER TECHNOLOGY , v. 333, p. 364-376, 2018.

• MALEKAN, MOHAMMAD ; CARVALHO, HERMES . Analysis of a main fatigue crack interaction with multiple micro-cracks/voids in a compact tension specimen repaired by stop-hole technique. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , p. 030932471877112-662, 2018.

• MALEKAN, MOHAMMAD ; BARROS, FELICIO B. ; PITANGUEIRA, ROQUE L.S. . Fracture Analysis in Plane Structures with the Two-scale G/XFEM Method. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , v. 155, p. 65-80, 2018.

• SANTANA, GUILHERME ANDRÉ ; MALEKAN, MOHAMMAD ; ARAÚJO, ALEXANDRE MARTINS ; DONADON, LÁZARO VALENTIM ; CIMINI JR, CARLOS ALBERTO . Finite element evaluation of the effects of curvature in Lamb waves for composites structural health monitoring. Latin American Journal of Solids and Structures , v. 15, p. 1-21, 2018.

• MALEKAN, MOHAMMAD ; CIMINI, CARLOS ALBERTO . Finite element analysis of a repaired thin-walled aluminum tube containing a longitudinal crack with composite patches under internal dynamic loading. COMPOSITE STRUCTURES , v. 184, p. 980-1004, 2018.

• MALEKAN, M. ; BARROS, F. B. ; PITANGUEIRA, R. L. S. ; ALVES, P. D. ; PENNA, S. S. . A computational framework for a two-scale generalized/extended finite element method: generic imposition of boundary conditions. ENGINEERING COMPUTATIONS , v. 34, p. 1-32, 2017.

• HOSSEINI, S. ; MALEKAN, MOHAMMAD ; PITANGUEIRA, ROQUE L. S. ; SILVA, R. P. . Imposition of Dirichlet Boundary Conditions in Element Free Galerkin Method through an Object-Oriented Implementation. Latin American Journal of Solids and Structures , v. 14, p. 1017-1039, 2017.

• MALEKAN, MOHAMMAD ; BARROS, FELÍCIO B. . Numerical analysis of a main crack interactions with micro-defects/inhomogeneities using two-scale generalized/extended finite element method. COMPUTATIONAL MECHANICS , v. 62, p. 783-801, 2017.

• 2016 MALEKAN, MOHAMMAD ; HOSSEINI, SAMIRA ; SEDGHI, VAFA . Semiautonomous Mission Operation Plan for a Remote Sensing Leo Microsatellite. JOURNAL OF AEROSPACE ENGINEERING , v. 29, p. 04015016, 2016.

• 2016 MALEKAN, MOHAMMAD ; BARROS, FELÍCIO B. ; PITANGUEIRA, ROQUE L. S. ; ALVES, PHILLIPE D. . An Object-Oriented Class Organization for Global-Local Generalized Finite Element Method. Latin American Journal of Solids and Structures , v. 13, p. 2529-2551, 2016.

• 2016 MALEKAN, MOHAMMAD ; BARROS, FELICIO BRUZZI . Well-conditioning global-local analysis using stable generalized/extended finite element method for linear elastic fracture mechanics. Computational Mechanics (Berlin. Internet) , v. 58, p. 819-831, 2016.

• MALEKAN, M. ; BARROS, FELÍCIO B. ; SILVA, R. P. . Development and Implementation of a Well-conditioning Approach Toward Generalized/Extended Finite Element Method into an Object-oriented Platform. REVISTA INTERDISCIPLINAR DE PESQUISA EM ENGENHARIA , v. 2, p. 186-205, 2016.

• 2015 MALEKAN, MOHAMMAD ; BARROS, FELÍCIO BRUZZI ; SHEIBANI, EHSAN . Thermo-mechanical analysis of a cylindrical tube under internal shock loading using numerical solution. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 38, p. 2635-2649, 2015.

• 2014 MALEKAN, MOHAMMAD . Finite element simulation of gaseous detonation-driven fracture in thin aluminum tube using cohesive element. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 38, p. 989-997, 2014.

• 2013 MIRZAEI, MAJID ; MALEKAN, MOHAMMAD ; SHEIBANI, EHSAN . Failure analysis and finite element simulation of deformation and fracture of an exploded CNG fuel tank. ENGINEERING FAILURE ANALYSIS , v. 30, p. 91-98, 2013.

• 2012 MALEKAN, M. ; MIRZAEI, M. . Crack Growth Modeling for a Thin Aluminum Tube under Gaseous Detonation Loading Using Cohesive Element. Journal of Modares Mechanical Engineering , v. 12, p. 95-102, 2012.

• SANTANA, G. A. ; MALEKAN, M. ; DONADON, L. V. ; ARAUJO, A. M. ; CIMINI, C. A. . Finite Element Analysis of Lamb Waves Behavior on the Leading Edge of Wings and Skins Made of Composite Materials. In: 6th International Symposium on Solid Mechanics - MecSol 2017, 2017, Joinville. 6th International Symposium on Solid Mechanics - MecSol 2017, 2017.

• RAMEZANI, M. ; CASAS, E. B. L. ; MALEKAN, M. ; MATTOS, C. M. A. ; MANZOLI, O. L. . Fracture Analysis of a Restored Premolar Tooth Using Finite Element Method. In: 6th International Symposium on Solid Mechanics - MecSol 2017, 2017, Joinville. 6th International Symposium on Solid Mechanics - MecSol 2017, 2017.

• MALEKAN, M. ; BARROS, FELÍCIO B. ; SILVA, L. L. ; L. S. PITANGUEIRA, ROQUE . Fracture Modeling in Two-dimensional Problems Using a G/XFEM Object-oriented Implementation. In: 6th International Symposium on Solid Mechanics - MecSol 2017, 2017, Joinville. 6th International Symposium on Solid Mechanics - MecSol 2017, 2017.

• MALEKAN, M. ; BARROS, FELÍCIO B. ; CARVALHO, H. . Fatigue Analysis of a Compact Tension Specimen With Multiple Voids/Holes Repaired by Stop-Hole Technique. In: 6th International Symposium on Solid Mechanics - MecSol 2017, 2017, Joinville. 6th International Symposium on Solid Mechanics - MecSol 2017, 2017.

• MALEKAN, M. ; BARROS, F. B. ; SILVA, R. P. . Development and Implementation of a Well-conditioning Approach Toward Generalized/Extended Finite Element Method into an Object-oriented Platform. In: XXXVII Latin American Congress on Computational Methods, 2016, Brasilia. XXXVII Latin American Congress on Computational Methods, 2016.

• MALEKAN, MOHAMMAD ; B. BARROS, FELICIO ; L. S. PITANGUEIRA, ROQUE . A FINITE ELEMENT/GENERALIZED FINITE ELEMENT METHOD CODE-COUPLING FOR LINEAR ELASTIC FRACTURE MECHANICS PROBLEMS. In: XXXVI IberianLatin American Congress on Computational Methods in Engineering, 2015, Rio de Janeiro.

• RAMEZANI, M. ; MALEKAN, M. ; BARROS, F. B. . Numerical Analysis of Thermo-mechanical Stresses in Tubes under Internal Moving Pressure-thermal Waves. In: XXXV Latin American Congress on Computational Methods, 2014, Fortaleza. XXXV Latin American Congress on Computational Methods, 2014.

• RAMEZANI, M. ; MALEKAN, M. ; BARROS, F. B. . Boundary Conditions Effects on the Dynamic Response of Tubes under Internal Moving Pressure: Numerical Analysis. In: XXXV Latin American Congress on Computational Methods, 2014, Fortaleza. XXXV Latin American Congress on Computational Methods, 2014.

• MALEKAN, M. ; BARROS, F. B. ; PITANGUEIRA, R. L. S. ; ALVES, P. D. . Development and Implementation of a Generalized Finite Element Method Object-oriented Class for the Global-Local Analysis. In: XXXV Latin American Congress on Computational Methods, 2014, Fortaleza. XXXV Latin American Congress on Computational Methods, 2014.

• MALEKAN, M. ; HOSSEINI, S. ; SEDGHI, V. ; KHADEMI, M. ; CHARMAKANI, K. R. . Mission Operation Plan for SemiAutonomous Control of a Remote Sensing LEO Student Microsatellite. In: International Astronautical Congress, 2013, Beijing. International Astronautical Congress, 2013.

• MALEKAN, M. ; BACH, S. ; CESTARI, I. A. . Numerical Simulation of a Bileaflet Mechanical Valve for Application in a Pediatric Pulsatile ventricular Assist Device. In: 14th International Conference on Pediatric Mechanical Circulatory Support Systems and Pediatric Cardiopulmonary Perfusion, 2018, Chicaho. 14th International Conference on Pediatric Mechanical Circulatory Support Systems and Pediatric Cardiopulmonary Perfusion. Chicago, 2018.

Projetos de pesquisa

• 2017 - Atual

  Fluid-Structure Interaction Simulation of a Ventricular Assist Device, Descrição: FSI Simulation of a Ventricular Assist Device Designed in InCor, and analysis of a bileaflet mechanical heart valve using ANSYS. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (1) . , Integrantes: Mohammad Malekan - Integrante / Idagene Aparecida Cestari - Coordenador.

• 2015 - 2018

  Structural Health Monitoring of wind turbine blades made of composites, Descrição: The behavior of Lamb Waves (Surface Waves) for thin composite plates is well known. The underlying physics of these waves are being used in the field of Structural Health Monitoring, to access the existence, the location and the size of damages on aerospace and composite structures overall, including wind turbine blades. However, no thorough study was made regarding the effect of the high curvature to thickness ration in the leading edge of those structures. This characteristic changes the Lamb Waves and, hence, the algorithms for accessing damage need to account for that. This work investigates the expected changes on the Lamb Waves for specific glass fiber reinforced polymer skins for many values of curvature to thickness on the leading edge, showing trends that can be used on future modifications of the algorithm for structural health monitoring of those structures. This study will be done through both experimental and numerical analysis.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Doutorado: (2) . , Integrantes: Mohammad Malekan - Integrante / Guilherme André Santana - Integrante / Carlos Alberto Cimini - Coordenador / LÁZARO VALENTIM DONADON - Integrante / Alexandre Martins Araújo - Integrante.

• 2015 - 2017

  Fracture Analysis of a Restored Premolar Tooth using Finite Element Method, Descrição: The term cracked tooth syndrome refers to an incomplete fracture of a vital posterior tooth that involves the dentin and occasionally extends into the pulp. There is a very limited number of publications trying to model dentin crack growth using numerical techniques. In this research, a finite element based technique will be used to simulate crack initiation in restored teeth, incorporating a constitutive model developed for brittle materials and formulated to consider damage. The first step for the analysis is the development of a 3D geometric model to serve as the basis for a finite element analysis. The geometric model was based on CT data obtained from a patient. A special finite element technique, named mesh fragmentation technique, will be used to model and analyze the behavior of the premolar tooth.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (1) Doutorado: (2) . , Integrantes: Mohammad Malekan - Integrante / Maryam Ramezani - Integrante / Estevam Barbosa de Las Casas - Coordenador / Osvaldo Luis Manzoli - Integrante / Cláudia M. A. Mattos - Integrante / Veronika Fedotova - Integrante.

• 2014 - 2017

  Crack propagation modeling in plane structures using two-scale generalized/extended finite element method, Descrição: A numerical implementation of generalized/extended finite element method (G/XFEM) to analyze a fractured plate structure is investigated in this work. One of the most important parameters in fracture mechanics is the determination of the crack propagation direction under mixed mode conditions. In the concept of linear elastic fracture mechanics, the stress intensity factor can be used to either determine the crack propagation direction or propagation status, i.e. the crack can start to propagate or not. This research project deals with an object-oriented based fracture analysis of two-dimensional/Reissner-Mindlin problems using both classical and two-scale G/XFEM methodologies.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (1) . , Integrantes: Mohammad Malekan - Integrante / Felicio Bruzzi Barros - Coordenador.

Prêmios