Jean André François DILLE

Idiomas

Áreas de atuação

Organização de eventos

Participação em eventos

Participação em bancas

Orientou

Produções bibliográficas

• DILLE, J. ; PACHECO, C. J. ; MALET, L. ; MENDES, M. C. ; ARAUJO, L. S. ; GAUDENCIO, M. ; ECKSTEIN, C. B. ; NOGUEIRA, L. ; REBELLO, J. M. A. ; PEREIRA, G. R. ; DE ALMEIDA, L. H. . Microstructural Investigation of the Magnetic Behavior of a Modified HP-NbTi Heat-Resistant Cast Austenitic Stainless Steel. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , v. 52, p. 1260-1268, 2021.

• GUZMAN, MARIBEL ; DILLE, JEAN ; GODET, STEPHANE . Effect of pH and ammonia concentration on the shape and size of fluorapatite nanoparticles obtained by chemical reaction. MATERIALS LETTERS , v. 303, p. 130559, 2021.

• GUZMAN, MARIBEL ; ARCOS, MARIELLA ; DILLE, JEAN ; ROUSSE, CÉLINE ; GODET, STÉPHANE ; MALET, LOÏC . Effect of the Concentration and the Type of Dispersant on the Synthesis of Copper Oxide Nanoparticles and Their Potential Antimicrobial Applications. ACS Omega , v. 6, p. 18576-18590, 2021.

• GUIMARÃES, ALESSANDRA VIEIRA ; DA SILVEIRA, ROSA MARIA SALES ; DE ALMEIDA, LUIZ HENRIQUE ; ARAUJO, LEONARDO SALES ; FARINA, ALEXANDRE BELLEGARD ; FRANÇOIS DILLE, JEAN ANDRÉ . Influence of yttrium addition on the microstructural evolution and mechanical properties of superalloy 718. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , v. 776, p. 139023, 2020.

• GALLO, FLÁVIA DA CRUZ ; AZEVEDO, LUIZ MAURÍCIO BARRETO DE ; LABRE, CILENE ; ARAÚJO, LEONARDO SALES ; DILLE, JEAN ; ALMEIDA, LUIZ HENRIQUE DE . Correlation between grain boundary character distribution and -phase precipitation in nickel-based superalloy 718. Journal of Materials Research and Technology-JMR&T , v. 9, p. 1801-1808, 2020.

• VIEIRA NUNES, ALINE RAQUEL ; BORBOREMA, SINARA ; ARAÚJO, LEONARDO SALES ; MALET, LOÏC ; DILLE, JEAN ; HENRIQUE DE ALMEIDA, LUIZ . Influence of thermo-mechanical processing on structure and mechanical properties of a new metastable Ti-29Nb-2Mo-6Zr alloy with low Young?s modulus. JOURNAL OF ALLOYS AND COMPOUNDS , v. 820, p. 153078, 2020.

• ALVARÃES, CAMILA P. ; SANDES, SORAIA S. ; JORGE, JORGE C. F. ; DE SOUZA, LUÍS F. G. ; ARAÚJO, LEONARDO S. ; MENDES, MATHEUS C. ; DILLE, JEAN . Microstructural Characterization of Inconel 625 Nickel-Based Alloy Weld Cladding Obtained by Electroslag Welding Process. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , v. 29, p. 3004-3015, 2020.

• LUTZ, ALEXANDER ; MALET, LOÏC ; DILLE, JEAN ; DE ALMEIDA, LUIZ HENRIQUE ; LAPEIRE, LINSEY ; VERBEKEN, KIM ; GODET, STÉPHANE ; TERRYN, HERMAN ; DE GRAEVE, IRIS . Effect of Zn on the grain boundary precipitates and resulting alkaline etching of recycled Al-Mg-Si-Cu alloys. JOURNAL OF ALLOYS AND COMPOUNDS , v. 794, p. 435-442, 2019.

• VIEIRA NUNES, ALINE RAQUEL ; BORBOREMA, SINARA ; MALET, LOÏC ; DILLE, JEAN ; DE ALMEIDA, LUIZ HENRIQUE . Microstructural Evolution of Cold-Rolled Metastable Ti-29Nb-2Mo-6Zr Alloy. MICROSCOPY AND MICROANALYSIS , v. 25, p. 2634-2635, 2019.

• VALLE, L.C.M. ; SANTANA, A.I.C. ; REZENDE, M.C. ; DILLE, J. ; MATTOS, O.R. ; DE ALMEIDA, L.H. . The influence of heat treatments on the corrosion behaviour of nickel-based alloy 718. JOURNAL OF ALLOYS AND COMPOUNDS , v. 809, p. 151781, 2019.

• DE LIMA, H. M. L. F. ; TAVARES, S. S. M. ; ARAUJO, W. S. ; DILLE, J. ; MALET, L. . Characterization of a Cast Duplex Stainless Steel with 3.0%Cu and Modeling of Precipitation Hardening. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , v. 28, p. 2421-2426, 2019.

• NUNES, ALINE RAQUEL VIEIRA ; BORBOREMA, SINARA ; ARAÚJO, LEONARDO SALES ; DILLE, JEAN ; MALET, LOÏC ; DE ALMEIDA, LUIZ HENRIQUE . Production, microstructure and mechanical properties of cold-rolled Ti-Nb-Mo-Zr alloys for orthopedic applications. JOURNAL OF ALLOYS AND COMPOUNDS , v. 743, p. 141-145, 2018.

• DILLE, JEAN ; PACHECO, CLARA JOHANNA ; CAMERINI, CESAR GIRON ; MALET, LOIC CHARLES ; NYSTEN, BERNARD ; PEREIRA, GABRIELA RIBEIRO ; DE ALMEIDA, LUIZ HENRIQUE ; ALCOFORADO REBELLO, JOÃO MARCOS . Influence of Heat Treatments on Microstructure and Magnetic Domains in Duplex Stainless Steel S31803. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , v. 49, p. 3515-3524, 2018.

• REZENDE, MONICA COSTA ; ARAÚJO, LEONARDO SALES ; GABRIEL, SINARA BORBOREMA ; DILLE, JEAN ; DE ALMEIDA, LUIZ HENRIQUE . Observations on Dynamic Strain Aging Manifestation in Inconel 718 Superalloy. MATERIALS SCIENCE FORUM (ONLINE) , v. 930, p. 390-394, 2018.

• GONZALEZ'CARANTON, ALBERTH RENNE ; DILLE, JEAN ; BARRETO, JADE ; STAVALE, FERNANDO ; PINTO, JOSÉ CARLOS ; SCHMAL, MARTIN . Nanostructured PdCu Catalysts Supported on ZrAl and ZrTi for Synthesis of Vinyl Acetate. ChemCatChem , v. 10, p. 5256-5269, 2018.

• SPADOTTO, JULIO CESAR ; DILLE, JEAN ; WATANABE, MASASHI ; SOLÓRZANO, I. GUILLERMO . Grain boundary precipitation phenomena in an alloy 33 (Cr-Fe-Ni-N) subjected to direct-aging treatments (700-°C and 900-°C). MATERIALS CHARACTERIZATION , v. 140, p. 113-121, 2018.

• TAVARES, S. S. M. ; RODRIGUES, C. R. ; DE OLIVEIRA, C. A. S. ; WOYAMES, C. B. ; DILLE, J. . Influence of Heat Treatments on Microstructure and Toughness of 9%Ni Steel. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , v. 27, p. 1530-1536, 2018.

• GABRIEL, SINARA BORBOREMA ; DA SILVA KASSYA, JESSICA PEIXOTO ; JACINTO, CAROLINE MIRANDA ; DOS SANTOS, LEIZY P?MELA OLIVEIRA ; NUNES, CARLOS ANGELO ; ARA?JO, LEONARDO SALES ; DILLE, JEAN ; BALDAN, RENATO ; DE ALMEIDA, LUIZ HENRIQUE . Development of Ti-12Mo-8Nb Alloy for Biomedical Application. MATERIALS SCIENCE FORUM (ONLINE) , v. 899, p. 191-194, 2017.

• DILLE, J. ; AREIZA, M.C.L. ; TAVARES, S.S.M. ; PEREIRA, G.R. ; DE ALMEIDA, L.H. ; REBELLO, J.M.A. . Microstructural evolution during aging at 800°C and its effect on the magnetic behavior of UNS S32304 lean duplex stainless steel. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS , v. 426, p. 102-107, 2017.

• DE VOS, CAROLINE ; BANETON, JOFFREY ; WITZKE, MEGAN ; DILLE, JEAN ; GODET, ST?PHANE ; GORDON, MICHAEL J ; SANKARAN, R MOHAN ; RENIERS, FRAN?OIS . A comparative study of the reduction of silver and gold salts in water by a cathodic microplasma electrode. JOURNAL OF PHYSICS D-APPLIED PHYSICS , v. 50, p. 105206, 2017.

• NUNES, ALINE RAQUEL VIEIRA ; GABRIEL, SINARA BORBOREMA ; NUNES, CARLOS ANGELO ; ARAÚJO, LEONARDO SALES ; BALDAN, RENATO ; MEI, PAULO ; MALET, LOÏC ; DILLE, JEAN ; ALMEIDA, LUIZ HENRIQUE DE . Microstructure and Mechanical Properties of Ti-12Mo-8Nb Alloy Hot Swaged and Treated for Orthopedic Applications. Materials Research-Ibero-american Journal of Materials , v. 20, p. 0337, 2017.

• MINÁ, EMERSON MENDONÇA ; DA SILVA, YURI CRUZ ; DILLE, JEAN ; CARVALHO SILVA, CLEITON . Effect of dilution on the microstructure of AWS ERNiCrMo-14 alloy in overlay welding by the TIG process with cold wire feed. WELDING INTERNATIONAL , v. 32, p. 1-9, 2017.

• MINÁ, ÉMERSON MENDONÇA ; DA SILVA, YURI CRUZ ; MOTTA, MARCELO FERREIRA ; DE MIRANDA, HÉLIO CORDEIRO ; DILLE, JEAN ; SILVA, CLEITON CARVALHO . Electron detection modes comparison for quantification of secondary phases of Inconel 686 weld metal. MATERIALS CHARACTERIZATION , v. 133, p. 10-16, 2017.

• GABRIEL, SINARA BORBOREMA ; DILLE, JEAN ; NUNES, CARLOS ANGELO ; SANTOS JR., EMANUEL ; BALDAN, RENATO ; MEI, PAULO ; CASTRO REZENDE, MONICA ; ARAUJO, LEONARDO SALES ; DE ALMEIDA, LUIZ HENRIQUE . Effect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb Alloy. MATERIALS SCIENCE FORUM (ONLINE) , v. 869, p. 952-956, 2016.

• MINÁ, ÉMERSON MENDONÇA ; DA SILVA, YURI CRUZ ; DILLE, JEAN ; SILVA, CLEITON CARVALHO . The Effect of Dilution on Microsegregation in AWS ER NiCrMo-14 Alloy Welding Claddings. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , v. 47, p. 6138-6147, 2016.

• VALOVA, EUGENIA ; ARMYANOV, STEPHAN ; HRISTOVA, GERGANA ; VASSILEV, TSVETAN ; STEENHAUT, OSCAR ; DILLE, JEAN ; HUBIN, ANNICK ; VANDENDAEL, ISABELLE . Electroless deposited NiCeP coatings. SURFACE & COATINGS TECHNOLOGY , v. 304, p. 468-475, 2016.

• MINÁ, ÉMERSON MENDONÇA ; SILVA, YURI CRUZ DA ; DILLE, JEAN ; SILVA, CLEITON CARVALHO . Efeito da Diluição Sobre a Microestrutura da Liga AWS ER NiCrMo-14 na Soldagem de Revestimentos pelo Processo TIG com Alimentação de Arame Frio. REVISTA SOLDAGEM E INSPEÇÃO , v. 21, p. 317-329, 2016.

• COLLARD, MARIE ; RASTRICK, SAMUEL P. S. ; CALOSI, PIERO ; DEMOLDER, YOANN ; DILLE, JEAN ; FINDLAY, HELEN S. ; HALL-SPENCER, JASON MICHAEL ; MILAZZO, MARCO ; MOULIN, LAURE ; WIDDICOMBE, STEVE ; DEHAIRS, FRANK ; DUBOIS, PHILIPPE . The impact of ocean acidification and warming on the skeletal mechanical properties of the sea urchin from laboratory and field observations. ICES JOURNAL OF MARINE SCIENCE , v. 73, p. 727-738, 2016.

• REZENDE, M.C. ; ARAÚJO, L.S. ; GABRIEL, S.B. ; DILLE, J. ; DE ALMEIDA, L.H. . Oxidation assisted intergranular cracking under loading at dynamic strain aging temperatures in Inconel 718 superalloy. Journal of Alloys and Compounds , v. 1, p. 1, 2015.

• STANKOVA, N.E. ; ATANASOV, P.A. ; NEDYALKOV, N.N. ; STOYANCHOV, T.R. ; KOLEV, K.N. ; VALOVA, E.I. ; GEORGIEVA, J.S. ; ARMYANOV, ST.A. ; AMORUSO, S. ; WANG, X. ; BRUZZESE, R. ; GROCHOWSKA, K. ; 'LIWI'SKI, G. ; BAERT, K. ; HUBIN, A. ; DELPLANCKE, M.P. ; DILLE, J. . fs- and ns-laser processing of polydimethylsiloxane (PDMS) elastomer: Comparative study. Applied Surface Science , v. 336, p. 321-328, 2015.

• GEORGIEVA, J. ; VALOVA, E. ; MINTSOULI, I. ; SOTIROPOULOS, S. ; TATCHEV, D. ; ARMYANOV, S. ; HUBIN, A. ; DILLE, J. ; HOELL, A. ; RAGHUWANSHI, V. ; KARANASIOS, N. ; MALET, L. . Pt(Ni) electrocatalysts for methanol oxidation prepared by galvanic replacement on TiO2 and TiO2-C powder supports. Journal of Electroanalytical Chemistry , v. 754, p. 65-74, 2015.

• GABRIEL, SINARA BORBOREMA ; REZENDE, MÔNICA COSTA ; ALMEIDA, LUIZ HENRIQUE DE ; NUNES, CARLOS ANGELO ; DILLE, JEAN ; SOARES, GLÓRIA DE ALMEIDA . Control of the Microhardness to Young Modulus Ratio by Mechanical Processing of a Ti-10Mo-20Nb Alloy. MATERIALS RESEARCH , v. 18, p. 39-42, 2015.

• GABRIEL, SINARA BORBOREMA ; DILLE, JEAN ; REZENDE, MONICA CASTRO ; MEI, PAULO ; ALMEIDA, LUIZ HENRIQUE DE ; BALDAN, RENATO ; NUNES, CARLOS ANGELO . Mechanical Characterization of Ti?12mo?13nb Alloy for Biomedical Application Hot Swaged and Aged. MATERIALS RESEARCH , v. 18, p. 8-12, 2015.

• GEORGIEVA, J. ; VALOVA, E. ; MINTSOULI, I. ; SOTIROPOULOS, S. ; ARMYANOV, S. ; KAKAROGLOU, A. ; HUBIN, A. ; STEENHAUT, O. ; DILLE, J. . Carbon-supported Pt(Cu) electrocatalysts for methanol oxidation prepared by Cu electroless deposition and its galvanic replacement by Pt. Journal of Applied Electrochemistry , v. 44, p. 215-224, 2014.

• ARAUJO, L. S. ; DOS SANTOS, D. S. ; GODET, S. ; DILLE, J. ; PINTO, A. L. ; DE ALMEIDA, L. H. . Analysis of Grain Boundary Character in a Fine-Grained Nickel-Based Superalloy 718. Journal of Materials Engineering and Performance (Print) , v. 23, p. 4130-4135, 2014.

• ALZAHRANI, A. ; ALHAMED, Y. ; PETROV, L. ; ARMYANOV, S. ; VALOVA, E. ; GEORGIEVA, J. ; DILLE, J. . Mechanical and corrosion behavior of amorphous and crystalline electroless Ni-W-P coatings. Journal of Solid State Electrochemistry (Print) , v. 18, p. 1951-1961, 2014.

• GABRIEL, SINARA B. ; DE ALMEIDA, LUIZ H. ; NUNES, CARLOS A. ; DILLE, JEAN ; SOARES, GLÓRIA A. . Maximisation of the ratio of microhardness to the Young's modulus of Ti-12Mo-13Nb alloy through microstructure changes. Materials Science & Engineering. C, Biomimetic Materials, Sensors and Systems (Print) , v. 33, p. 3319-3324, 2013.

• MINTSOULI, I. ; GEORGIEVA, J. ; ARMYANOV, S. ; VALOVA, E. ; AVDEEV, G. ; HUBIN, A. ; STEENHAUT, O. ; DILLE, J. ; TSIPLAKIDES, D. ; BALOMENOU, S. ; SOTIROPOULOS, S. . Pt-Cu electrocatalysts for methanol oxidation prepared by partial galvanic replacement of Cu/carbon powder precursors. Applied Catalysis. B, Environmental (Print) , v. 136-137, p. 160-167, 2013.

• DE SOUZA, GABRIELA R.X. ; GABRIEL, SINARA B. ; DILLE, JEAN ; DOS SANTOS, DILSON S. ; DE ALMEIDA, LUIZ HENRIQUE . Work hardening and aging contribution on the mechanical properties of X-750 nickel-based superalloy. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing , v. 564, p. 102-106, 2013.

• MINTSOULI, I. ; GEORGIEVA, J. ; VALOVA, E. ; ARMYANOV, S. ; KAKAROGLOU, A. ; HUBIN, A. ; STEENHAUT, O. ; DILLE, J. ; PAPADERAKIS, A. ; KOKKINIDIS, G. ; SOTIROPOULOS, S. . Pt-Ni carbon-supported catalysts for methanol oxidation prepared by Ni electroless deposition and its galvanic replacement by Pt. Journal of Solid State Electrochemistry (Print) , v. 17, p. 435-443, 2013.

• VALLE, L. C. M. ; ARAÚJO, L. S. ; GABRIEL, S. B. ; DILLE, J. ; ALMEIDA, L. H. . The Effect of Phase on the Mechanical Properties of an Inconel 718 Superalloy. Journal of Materials Engineering and Performance (Print) , v. 22, p. 1512-1518, 2012.

• CAMURRI, CARLOS ; CARRASCO, CLAUDIA ; LEITE, RODRIGO ; MANGALARAJA, RAMALINGA ; DILLE, JEAN . Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires. Journal of Materials Engineering and Performance (Print) , v. 21, p. 1474-1478, 2012.

• VITRY, V. ; KANTA, A.-F. ; DILLE, J. ; DELAUNOIS, F. . Structural state of electroless nickel-boron deposits (5wt.% B): Characterization by XRD and TEM. Surface & Coatings Technology , v. 206, p. 3444-3449, 2012.

• GUZMAN, MARIBEL ; DILLE, JEAN ; GODET, STÉPHANE . Synthesis and antibacterial activity of silver nanoparticles against gram-positive and gram-negative bacteria. Nanomedicine , v. 8, p. 37-45, 2012.

• D'ANS, PIERRE ; DILLE, JEAN ; DEGREZ, MARC . Thermal fatigue resistance of plasma sprayed yttria-stabilised zirconia onto borided hot work tool steel, bonded with a NiCrAlY coating: Experiments and modelling. Surface & Coatings Technology , v. 205, p. 3378-3386, 2011.

• GABRIEL, SINARA BORBOREMA ; DILLE, JEAN ; NUNES, CARLOS ANGELO ; SOARES, GLÓRIA DE ALMEIDA . THe effect of niobium content on the hardness and elastic modulus of heat-treated ti-10mo-xnb alloys. Materials Research (São Carlos. Impresso) , v. 13, p. 333-337, 2010.

• VALOVA, E. ; GEORGIEVA, J. ; ARMYANOV, S. ; AVRAMOVA, I. ; DILLE, J. ; KUBOVA, O. ; DELPLANCKE-OGLETREE, M.-P. . Corrosion behavior of hybrid coatings: Electroless Ni-Cu-P and sputtered TiN. Surface & Coatings Technology , v. 204, p. 2775-2781, 2010.

• FURTADO, H. C. ; ALMEIDA, L. H. ; DILLE, J. ; MAY, I. . Correlation Between Hardness Measurements and Remaining Life Prediction for 2.25Cr-1Mo Steel Used in Power Plants. Journal of Materials Engineering and Performance (Print) , v. 19, p. 558-561, 2010.

• MANCIER, VALÉRIE ; ROUSSE-BERTRAND, CÉLINE ; DILLE, JEAN ; MICHEL, JEAN ; FRICOTEAUX, PATRICK . Sono and electrochemical synthesis and characterization of copper core-silver shell nanoparticles. Ultrasonics Sonochemistry , v. 17, p. 690-696, 2010.

• DILLE, J. A. F. ; GUZMAN, M. ; GODET, S. . Synthesis of silver nanoparticles by chemical reduction method and their antibacterial activity. International Journal of Chemical and Biomolecular Engineering , v. 2, p. 104-111, 2009.

• D'ANS, PIERRE ; BONDOUX, CÉLINE ; DEGRANDCOURT, CHRISTOPHE ; BAKRIM, MOHAMED ; DILLE, JEAN ; SEGERS, LUC ; DEGREZ, MARC . Thermal Fatigue of Anticorrosive Coatings and Multilayer Coatings: A Performance Index Approach. Materials Science Forum (Online) , v. 595-598, p. 941-950, 2008.

• CAMURRI, C. ; CARRASCO, C. ; DILLE, J. . Residual stress during heat treatment of steel grinding balls. Journal of Materials Processing Technology , v. 208, p. 450-456, 2008.

• SILVA, I.C. ; REBELLO, J.M.A. ; BRUNO, A.C. ; JACQUES, P.J. ; NYSTEN, B. ; DILLE, J. . Structural and magnetic characterization of a carburized cast austenitic steel. Scripta Materialia , v. 59, p. 1010-1013, 2008.

• VALOVA, E. ; ARMYANOV, S. ; DILLE, J. ; VAN INGELGEM, Y. ; HUBIN, A. ; STEENHAUT, O. . Electroless Deposited Co-Re-P and Co-Re-Ni-P Coatings: Elemental State of the Alloy Components and Their Localization. Journal of the Electrochemical Society , v. 155, p. D449, 2008.

• RESENDE, C.X. ; DILLE, J. ; PLATT, G.M. ; BASTOS, I.N. ; SOARES, G.A. . Characterization of coating produced on titanium surface by a designed solution containing calcium and phosphate ions. Materials Chemistry and Physics , v. 109, p. 429-435, 2008.

• RESENDE, CHRISTIANE XAVIER ; PLATT, GUSTAVO MENDES ; DILLE, JEAN ; BASTOS, IVAN NAPOLEÃO ; DE ALMEIDA SOARES, GLÓRIA D. . Designed Solution to Coat Titanium Sheets with Octacalcium Phosphate. Key Engineering Materials (Online) , v. 361-363, p. 665-668, 2008.

• CAMURRI, CARLOS ; CARRASCO, C. ; DILLE, JEAN . Temperature Distribution, Phase Transformations and Residual Stresses in Heat Treatment of Grinding Balls. Materials Science Forum (Online) , v. 539-543, p. 2234-2239, 2007.

• NUNES, F.C. ; DE ALMEIDA, L.H. ; DILLE, J. ; DELPLANCKE, J.-L. ; LE MAY, I. . Microstructural changes caused by yttrium addition to NbTi-modified centrifugally cast HP-type stainless steels. Materials Characterization , v. 58, p. 132-142, 2007.

• BARBOSA, C. ; DILLE, J. ; DELPLANCKE, J.-L. ; REBELLO, J.M.A. ; ACSELRAD, O. . A microstructural study of flash welded and aged 6061 and 6013 aluminum alloys. Materials Characterization , v. 57, p. 187-192, 2006.

• NUNES, F.C. ; DILLE, J. ; DELPLANCKE, J.-L. ; DE ALMEIDA, L.H. . Yttrium addition to heat-resistant cast stainless steel. Scripta Materialia , v. 54, p. 1553-1556, 2006.

• ARMYANOV, S. ; VALOVA, E. ; FRANQUET, A. ; DILLE, J. ; DELPLANCKE, J.-L. ; HUBIN, A. ; STEENHAUT, O. ; KOVACHEVA, D. ; TATCHEV, D. ; VASSILEV, TS. . Crystalline and Amorphous Electroless Co-W-P Coatings. Journal of the Electrochemical Society , v. 152, p. C612, 2005.

• TATCHEV, D. ; GOERIGK, G. ; VALOVA, E. ; DILLE, J. ; KRANOLD, R. ; ARMYANOV, S. ; DELPLANCKE, J.-L. . Investigation of the primary crystallization of Ni-17-at.%-P alloy by ASAXS. Journal of Applied Crystallography , v. 38, p. 787-794, 2005.

• VALOVA, E. ; DILLE, J. ; ARMYANOV, S. ; GEORGIEVA, J. ; TATCHEV, D. ; MARINOV, M. ; DELPLANCKE, J.-L. ; STEENHAUT, O. ; HUBIN, A. . Interface between electroless amorphous Ni-Cu-P coatings and Al substrate. Surface & Coatings Technology , v. 190, p. 336-344, 2005.

• CAMURRI, CARLOS ; ARANEDA, EUGENIA ; PAGLIERO, ANTONIO ; DILLE, JEAN . Optimal Operational Conditions during Production of Lead-Calcium-Tin Anodes for Improve Their Mechanical Properties. Materials Science Forum (Online) , v. 475-479, p. 2631-2634, 2005.

• ACSELRAD, O. ; PEREIRA, L. C. ; DILLE, J. ; DELPLANCKE, J. -L. . Room-temperature cleavage fracture of FeMnAlC steels. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science , v. 35, p. 3863-3866, 2004.

• VALOVA, E. ; ARMYANOV, S. ; FRANQUET, A. ; PETROV, K. ; KOVACHEVA, D. ; DILLE, J. ; DELPLANCKE, J.-L. ; HUBIN, A. ; STEENHAUT, O. ; VEREECKEN, J. . Comparison of the Structure and Chemical Composition of Crystalline and Amorphous Electroless Ni-W-P Coatings. Journal of the Electrochemical Society , v. 151, p. C385, 2004.

• LASSANCE, D. ; DILLE, JEAN ; DELPLANCKE, J-.L. ; PARDOEN, T. ; RYELANDT, L. ; DELANNAY, FRANCIS . Effect of the Homogenisation Conditions on the Extrudability and High Temperature Fracture Resistance of AA6063 Aluminium Alloy. Materials Science Forum (Online) , v. 426-432, p. 447-452, 2003.

• BARBOSA, C. ; REBELLO, J. M. A. ; ACSELRAD, O. ; DILLE, J. ; DELPLANCKE, J.-L. . Identification of Precipitates in 6013 Aluminum Alloy (Al-Mg-Si-Cu). Zeitschrift für Metallkunde (Cessou em 2006. Cont. ISSN 1862-5282 International Journal of Materials Research) , v. 93, p. 208-211, 2002.

• VALOVA, E. ; GEORGIEV, I. ; ARMYANOV, S. ; DELPLANCKE, J.-L. ; TACHEV, D. ; TSACHEVA, TS. ; DILLE, J. . Incorporation of Zinc in Electroless Deposited Nickel-Phosphorus Alloys I. A Comparative Study of Ni-P and Ni-Zn-P Coatings Deposition, Structure, and Composition. Journal of the Electrochemical Society , v. 148, p. C266-C273, 2001.

• DELPLANCKE, JEAN-LUC ; DILLE, JEAN ; REISSE, JACQUES ; LONG, GARY J. ; MOHAN, AMITABH ; GRANDJEAN, FERNANDE . Magnetic Nanopowders: Ultrasound-Assisted Electrochemical Preparation and Properties. Chemistry of Materials , v. 12, p. 946-955, 2000.

• AMEYE, L. ; COMPèRE, PHILIPPE ; DILLE, JEAN ; DUBOIS, PHILIPPE . Ultrastructure and cytochemistry of the early calcification site and of its mineralization organic matrix in Paracentrotus lividus (Echinodermata: Echinoidea). Histochemistry and Cell Biology , v. 110, p. 285-294, 1998.

• DILLE, J. ; CHARLIER, J. ; WINAND, R. . Effects of heat treatments on structure and mechanical properties of cobalt electrodeposits. Journal of Materials Science , v. 33, p. 2771-2779, 1998.

• DILLE, J. ; CHARLIER, J. ; WINAND, R. . The structure and mechanical properties of thick cobalt electrodeposits.. Journal of Materials Science , v. 32, p. 2637-2646, 1997.

• TERAO, N. ; DILLE, J. ; GROGNA, Z. . Effect of magnesium addition on the mechanical properties of metallic composite materials based on the eutectic Al-5,7 % Ni alloys. Journal of Materials Science , v. 22, p. 757-760, 1987.

• KOVACOVA, K. ; DILLE, J. A. F. ; BERGHEZAN, A. . Unidirectional solidification of a ternary eutectic Al-Si-Ni alloy. Composites , v. 1, p. 249-255, 1976.

• SPADOTTO, J. C. ; WATANABE, M. ; DILLE, J. ; SOLORZANO-NARANJO, I. G. . Phase Identification of Complex Grain Boundary Precipitation in a High Cr and Ni Superalloy Upon Direct-Aging. In: European Microscopy Congress 2016, 2016, Lyon. Proceedings of European Microscopy Congress 2016, 2016. v. 2. p. 1-2.

• MINA, E. M. ; SILVA, Y. C. ; DILLE, JEAN ; SILVA, C. C. . Efeito da Diluição na Microssegregação na Soldagem de Revestimentos pelo Processo TIG com Alimentação de Arame Frio da Liga AWS ER NiCrMo-14. In: XLI Congresso Nacional de Soldagem - CONSOLDA, 2015, Salvador. XLI Congresso Nacional de Soldagem - CONSOLDA, 2015.

• SILVA, Y. C. ; MINA, E. M. ; DILLE, JEAN ; SILVA, C. C. . Envelhecimento Térmico a 650 °C de Metais de Solda Dissimilares da Liga AWS ER NiCrMo-14 (INCONEL 686). In: XLI Congresso de Nacional de Soldagem - CONSOLDA, 2015, Salvador. XLI Congresso de Nacional de Soldagem - CONSOLDA, 2015.

• GABRIEL, S. B. ; MEI, P. R. ; NUNES, CARLOS A. ; ALMEIDA, L. H. ; DILLE, JEAN ; BALDAN, R. . TRANSMISSION ELECTRON MICROSCOPY OF AGED Ti-12Mo-13Nb ALLOY AFTER HEAT FORGING. In: COLAOB, 2014, ROSÁRIO. COLAOB, 2014.

• VIEIRA, T. F. B. ; DE ALMEIDA, L.H. ; DILLE, J. ; NUNES, CARLOS A. ; GABRIEL, SINARA B. . Efeito do duplo envelhecimento na dureza da liga Ti-12Mo-13Nb. In: COLAOB, 2012, Natal. 7 COLAOB, 2012. v. 1. p. 191.

• GABRIEL, S. B. ; VALLE, L. C. M. ; RIBEIRO, A. F. ; DILLE, J. ; ALMEIDA, L. H. . Evolução Microestrutural da Superliga Inconel 718 em diferentes condições de processamento. In: 65 Congresso Internacional da ABM, 2010, Rio de Janeiro. Anais do 65 Congresso Internacional da ABM. São Paulo, 2010. v. 1. p. 3103-3113.

• VALLE, L. C. M. ; GABRIEL, C. W. ; RIBEIRO, A. F. ; DILLE, J. ; ALMEIDA, L. H. . Evolução Microestrutural da Superliga Inconel 718 nas condições solubizada e envelhecida. In: 19 Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2010, Campos do Jordão. 19 Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2010. v. 1. p. 7112-7119.

• GABRIEL, G. R. X. ; DILLE, J. ; GABRIEL, SINARA B. ; RIBEIRO, A. F. ; DE ALMEIDA, LUIZ HENRIQUE . Estudo da fluência do tratamento térmico nas propriedades da superliga de níquel X-750. In: 19 Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2010, Campos do Jordão. 19 Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2010. v. 1. p. 7069-7076.

• GABRIEL, SINARA B. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, G.A. . Correlation between precipitated phases and hardness/young modulus ratio in aged Ti-10Mo-20Nb alloy. In: VI COLAOB, 2010, Gramado. Anais VI COLAOB, 2010. v. 1. p. 1-7.

• VALOVA, E. ; ARMYANOV, S. ; DILLE, J. A. F. ; VAN INGELGEM, Y. ; HUBIN, A. . Composition and structure of electroless-deposited Co-Re-P and Co-Re-Ni-P nanocrystalline coatings. In: Nanoscale Phenomena and Structures, 2008, Sofia. Nanoscale Phenomena and Structures, 2008. v. 1. p. 269-272.

• GABRIEL, SINARA B. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, G.A. . MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF AGED Ti-12Mo-13Nb ALLOY. In: 18 CBECIMAT, 2008, Porto de Galinhas. Anais do CBECIMAT, 2008. v. 1. p. 1-8.

• Garcia de Blas, J. C. ; PEREIRA, L. C. ; DILLE, J. ; BARBOSA, C. . Caracterização da subestrutura de alumínio AA1050 submetido a deformação plástica severa (Extrusão Angular em Canal). In: Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2008, Porto de Galinhas. 17 CBECIMAT - Cong. Brasileiro de Engenharia e Ciência dos Materiais, 2008. v. 1. p. 1-9.

• RESENDE, CHRISTIANE XAVIER ; DILLE, J. ; BASTOS, I.N. ; SOARES, G.A. . Characterization of octacalcium phosphate coating by electron microscopy. In: XXI Congress of the Brazilian Society for Microscopy and Microanalysis, 2007, Búzios. Proceedings of the XXI CSBMM, 2007.

• SCHNEIDER, S. G. ; DILLE, J. ; SOARES, G.A. . TEM characterization of annealed Ti-18Nb-13Zr alloy. In: XXI Congress of the Brazilian Society for Microscopy and Microanalysis, 2007, Búzios. Proceedings of the XXI CSBMM, 2007.

• DILLE, JEAN ; CHARLIER, J. ; DUCARME, O. ; RIQUIER, Y. . Effects of vanadium addition and hot rolling condition on microstructure and deep drawability of low carbon steel sheets. In: THERMEC'97 : International Conference on Thermomechanical Processing of Steels and Other Materials, 1997, Wollongong. Anais Thermec'97, 1997. p. 555-561.

• DILLE, J. ; DELPLANCKE, J. -L. ; CHARLIER, J. ; WINAND, R. . Room temperature recrystallization of nanocrystalline thin copper foils. In: MRS Proceedings, 1995. MRS Proceedings, 1994. v. 362. p. 231-237.

• DELPLANCKE, J-.L. ; WINAND, R. ; DILLE, J. ; CHARLIER, J. . Influence of the structure on the mechanical properties of electrodeposited metallic thin films.. In: Materials Research Society Symposium Proceedings, 1993. Materials Research Society Symposium Proceedings, 1993. v. 308. p. 607-612.

• DILLE, J. ; LOUIS, P. ; MANANGA, P. ; TSHIMANGA, K. ; BALEPE, B. . Radiocrystallographic Study of Electrolytic Cobalt. In: Extractive Metallurgy of Nickel and Cobalt (1988), 1988, Arizona. Extractive Metallurgy of Nickel and Cobalt, 1988. v. 1. p. 517-530.

• LOUIS, P. ; DILLE, J. ; ILLUNGA, L. ; SHUNGU, T. . Electrodeposition of malleable cobalt.. In: Extractive Metallurgy of Nickel and Cobalt, 1988, Arizona. Anais Extractive Metallurgy of Nickel and Cobalt, 1988. v. 1. p. 505-515.

• TERAO, N. ; DILLE, J. ; VIELVOYE, G. ; BERGHEZAN, A. . New method of preparation of dispersion -hardening materials: Improvement of mechanical properties of as-cast eutectics followed by heavy deformation.. In: Proc. 4th International Conference on Composite Materials, ICCM-IV, 1982, Tóquio. Proc. 4th International Conference on Composite Materials, ICCM-IV, 1982. v. 1. p. 1585-1592.

• MENDES, M. C. ; NASCIMENTO, M. ; ARAUJO, L. S. ; MALET, LOÏC ; DILLE, J. ; DE ALMEIDA, LUIZ H. . Eta phase characterization in HP40 steels after long-term exposure in service conditions. In: 28° Congresso da Sociedade Brasileira de Microscopia e Microanálise, 2021. Anais do Evento, 2021.

• GABRIEL, SINARA B. ; DILLE, J. ; SOARES, GLÓRIA A. ; NUNES, CARLOS A. ; DE ALMEIDA, L.H. . Young's modulus and microstructural characterization of treated Ti-10Mo-xNb alloy for biomedical application.. In: XI Encontro da SBPmat, 2012, Florianópolis. XI Encontro da SBPmat, 2012.

• GABRIEL, G. R. X. ; RIBEIRO, A. F. ; GABRIEL, SINARA B. ; DILLE, J. ; DE ALMEIDA, L.H. . Influence of Different Processing Routes on Mechanical Properties of X-750 Superalloy. In: X SBPmat, 2011, Gramado. X Encontro Anual da Sociedade Brasileira de Pesquisa em Materiais (SBPMat), 2011.

• GABRIEL, SINARA B. ; DE ALMEIDA, LUIZ H. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, GLÓRIA A. . MICROSTRUCTURAL CHARACTERIZATION OF TI-10MO BASED ALLOY WITH DIFFERENTS NIOBIUM CONTENTS. In: XXIII CSBMM, 2011, Búzios. XXIII Congresso da Sociedade Brasileira de Microscopia e Microanálise, 2010. v. 1. p. 16964.

• GABRIEL, SINARA B. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, GLÓRIA A. . PROCESSING AND CHARACTERIZATION OF Ti-12Mo-13Nb and Ti-10Mo-20Nb ALLOYS FOR BIOMEDICAL APPLICATIONS. In: Encontro da SBPmat, 2010, Ouro Preto. IX Encontro da SBPMat, 2010.

• RESENDE, C. X. ; SADER, M. S. ; BASTOS, I. N. ; DILLE, J. ; SOARES, GLÓRIA A. . Titanium coated with octacalcium phosphate by a designed biomimetic solution. In: IMC17, 2010, Rio de Janeiro. IMC17, 2010. p. 1-2.

• Garcia de Blas, J. C. ; DILLE, J. ; PEREIRA, L. C. . A TEM study on bulk ultrafine-grained aluminum obtained by equal channel angular processing (ECAP). In: International Microscopy Congress (IMC17), 2010, Rio de Janeiro. Sociedade Brasileira de Microscopia e Microanálise, 2010. v. M8.29. p. 1-2.

• NUNES, ALINE RAQUEL VIEIRA ; BORBOREMA, SINARA ; ARAUJO, L. S. ; DILLE, J. ; DE ALMEIDA, LUIZ H. . Influence of cold rolling and annealing treatment on microstructure and mechanical properties of -type Ti-29Nb-2Mo-6Zr alloy for orthopedic application. In: 10 COLAOB, 2018, João Pessoa. 10 COLAOB. João Pessoa, 2018.

• NUNES, ALINE RAQUEL VIEIRA ; ARAUJO, L. S. ; BORBOREMA, SINARA ; MALET, LOÏC ; NUNES, CARLOS ANGELO ; DILLE, J. ; DE ALMEIDA, LUIZ H. . Microstructure, mechanical properties and texture evolution of cold rolled and annealed Ti-29Nb-2Mo-6Zr titanium alloy for orthopedic application. In: ISMANAN, 2018, Roma. ISMANAN. Roma, 2018.

• BORBOREMA, SINARA ; VICENTE, E. D. ; ARAUJO, L. S. ; VIEIRA NUNES, ALINE RAQUEL ; DE ALMEIDA, LUIZ H. ; DILLE, J. ; BALDAN, RENATO . TEM AND PROPERTIES OF AGED Ti-12Mo- 13Nb ALLOY. In: CBECIMAT, 2018, FOZ DO IGUAÇU. CBECIMAT. FOZ DO IGUAÇU, 2019.

• NUNES, ALINE RAQUEL VIEIRA ; MALET, LOÏC ; DILLE, J. ; ARA?JO, LEONARDO SALES ; BORBOREMA, SINARA ; ALMEIDA, L. H. . Twinning system and microstructure evolution in cold-rolled and annealed metastable beta titanium Ti-24Nb- 4Mo-3Zr alloy for orthopedic applications d. In: CBECIMAT, 2018, FOZ DO IGUAÇU. CBECIMAT. FOZ DO IGUAÇU, 2018.

• BORBOREMA, SINARA ; ALMEIDA, LUIZ HENRIQUE DE ; DE SOUZA, GABRIELA R.X. ; GOUVEA, E. S. R. ; CONCEICAO, M. O. T. ; DILLE, J. . Corrosion resistance of aged X-750 superalloy. In: ISMANAM 2017, 2017, San Sebastian. ISMANAM 2017, 2017.

• BORBOREMA, SINARA ; GOUVEA, E. S. R. ; ARAUJO, L. S. ; DE SOUZA, GABRIELA R.X. ; DILLE, J. ; SANTOS, I. D. ; ALMEIDA, LUIZ HENRIQUE DE . Effect of mechanical processing in the corrosion resistance of X-750 superalloy. In: EUROMAT, 2017, Thessalonik. EUROMAT. Thessalonik, 2017.

• MENDES, M. C. ; ALMEIDA, LUIZ HENRIQUE DE ; DILLE, J. . Microstructural effects of aging after a temperature surge event on centrifugally Cast HP-Steels Used in Steam Reformer Furnaces. In: 26 CSBMM, 2017, Búzios. 26 CSBMM. Búzios, 2017.

• GABRIEL, SINARA BORBOREMA ; SANTOS, G. F. ; DILLE, J. ; BALDAN, RENATO ; DE ALMEIDA, LUIZ H. ; REZENDE, M.C. ; MEI, PAULO . Effect of hot swaged on properties of aged Ti12Mo-13Nb alloy. In: 9ª COLAOB, 2016, Foz do Iguaçu. 9ª COLAOB. Foz do Iguaçu: 9ª COLAOB, 2016. v. xx.

• GABRIEL, SINARA B. ; LAMARCA, R. P. S. ; DILLE, JEAN ; NUNES, CARLOS A. ; BALDAN, RENATO ; ALMEIDA, L. H. . ELECTROCHEMICAL CHARACTERIZATION OF Ti-Mo-Nb ALLOYS HOT SWAGED AND AGED FOR BIOMEDICAL APPLICATIONS. In: 22CBECIMAT, 2016, Natal. 22CBECIMAT. Natal: 22CBECIMAT, 2016.

• LAMARCA, R. P. S. ; DILLE, JEAN ; REZENDE, M. C. ; ALMEIDA, L. H. ; NUNES, CARLOS A. ; BALDAN, R. ; GABRIEL, SINARA B. . MICROSTRUCTURAL CHARACTERIZATION OF HOT FORGED Ti-10Mo-20Nb alloy. In: CSBMM, 2015, BÚZIOS. CSBMM, 2015.

• MINA, E. M. ; SILVA, Y. C. ; MARQUES, D. G. ; SILVA, C. C. ; DILLE, JEAN . Avaliação Microestrutural de Revestimentos Soldados a Partir da Liga de Níquel UNS N06686 em Diversos Níveis de Diluição. In: VIII Congresso de Microscopia dos Materiais, 2015, Campinas. VIII Congresso de Microscopia dos Materiais, 2014.

• SILVA, Y. C. ; MINA, E. M. ; MARQUES, D. G. ; SILVA, C. C. ; DILLE, JEAN . Identificação por Microscopia Eletrônica de Transmissão de Precipitados em Soldas de Superligas de Niquel 686 Envelhecidas. In: VIII Congresso de Microscopia dos Materiais, 2014, Campinas. VIII Congresso de Microscopia dos Materiais, 2014.

• REZENDE, M. C. ; GABRIEL, SINARA B. ; ARAUJO, L. S. ; ALMEIDA, L. H. ; DILLE, JEAN . A study on the occurrence of phenomena at elevated temperatures impacting mechanical properties in superalloy Inconel 718. In: MICROMAT, 2014, Campinas. MICROMAT, 2014.

• TORRES, J. ; DE ALMEIDA, LUIZ H. ; MEI, P. R. ; NUNES, CARLOS A. ; DILLE, JEAN ; BALDAN, R. ; GABRIEL, SINARA B. . EFEITO DO FORJAMENTO A QUENTE NA MICROESTRUTURA DA LIGA Ti-10Mo-20Nb ENVELHECIDA. In: MICROMAT, 2014, Campinas. MICROMAT, 2014.

• GABRIEL, SINARA B. ; NUNES, CARLOS A. ; DILLE, J. ; MEI, P. R. ; DE ALMEIDA, L.H. . Mechanical characterization of Ti 12Mo 13Nb alloy for biomedical application. In: International Conference on Mechanics of Biomaterials and Tissues, 2013, Sitges. International Conference on Mechanics of Biomaterials and Tissues, 2013. v. 1.

• VIEIRA, T. F. B. ; DE ALMEIDA, LUIZ H. ; DILLE, J. ; NUNES, CARLOS A. ; GABRIEL, SINARA B. . Dureza da liga Ti-12Mo-13Nb após duplo envelhecimento. In: VI Colóquio Técnico Científico do UniFOA, 2012, Volta Redonda. VI Colóquio Técnico Científico do UniFOA, 2012.

• TORRES, J. ; ALMEIDA, L. H. ; DILLE, J. ; NUNES, CARLOS A. ; GABRIEL, S. B. . Efeito do duplo envelhecimento no módulo de elasticidade da liga Ti-12Mo-13Nb.. In: VI Colóquio Técnico Científico do UniFOA, 2012, VOLTA REDONDA. VI Colóquio Técnico Científico do UniFOA, 2012.

• VALLE, L. C. M. ; GABRIEL, S. B. ; DILLE, J. ; DE ALMEIDA, L.H. ; SANTANA, A. I. C. . Effect of delta phase and grain size on stress corrosion cracking resistance of inconel 718. In: EUROMAT 2011, 2011, Montpellier. EUROMAT 2011, 2011. v. B. p. 1658.

• GABRIEL, SINARA B. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, GLÓRIA A. . Young modulus- hardness ratio of treated Ti-12Mo-13Nb. In: 11th International Conference on Advanced Materials, 2009, Rio de Janeiro. Anais 11th International Conference on Advanced Materials, 2009.

• Garcia de Blas, J. C. ; DILLE, J. ; BARBOSA, C. ; PEREIRA, L. C. . Developmentes towards Bulk Nanostructured Aluminum by Severe Plastic Deformation (ECAP). In: 9th International Conference on Nanostructured Materials, 2008, Rio de Janeiro. NANO 2008 Abstracts Book, 2008. v. unico. p. 88-88.

• GABRIEL, S. B. ; NUNES, CARLOS A. ; DILLE, J. ; SOARES, GLÓRIA A. . Microstructural characterization of Ti-10Mo-xNb (3 x 9) alloys. In: XXI Congress of the Brazilian Society for Microscopy and Microanalysis, 2007, Búzios. Proceedings of the XXI CSBMM, 2007.

• Garcia de Blas, J. C. ; DILLE, J. ; SOUSA, F. A. . Refino Microestrutural de alumínio por extrusão angular em canal. In: Seminário Nacional de Forjamento, 2007, Bento Gonçalves. Seminário Nacional de Forjamento. Porto Alegre, 2007. v. XXVII. p. 319-326.

• DILLE, J. . Microstructural Investigation of the Magnetic Behaviour of a Heat-Resistant Cast Austenitic Stainless Steel. 2019. (Apresentação de Trabalho/Congresso).

Prêmios