Péter Zoltán Berke

Obtained the M.Sc. degree of the Budapest University of Technology and Economics (BUTE) in Mechanical Engineering in 2003 and the Ph.D. title of the Université Libre de Bruxelles (ULB) in Engineering Sciences in 2008. I am currently Visiting Professor at the Universidade Fedeal do Ceará (Brazil) and Scientific Collaborator of the Université Libre de Bruxelles (Belgium). The main orientation of my research activities is the computational modelling of complex phenomena and the development of advanced purpose built numerical tools in three main research axes: (i) the behaviour of complex structures, (ii) the nonlinear behaviour of complex and multi-phase materials, and (iii) the development and use of multi-scale numerical techniques which allow the investigation of the interaction of material and structural behaviours. Since the beginning of my academic career I am heavily involved in teaching and between 2007 and 2009 I was a full time teaching assistant (50% research and 50% teaching duties). My network of collaborators comprises, among others, the Materials Technology group (Prof. M.G.D. Geers) of the Eindhoven University of Technology (Netherlands), the Frankfurt Institute for Advanced Studies (Prof. A.V. Solov yov) of the Johann Wolfgang Goethe University (Germany), the Molecular Foundry, Imaging and Manipulation Facility, Materials Sciences Division (Prof. D.F. Ogletree) of the Lawrence Berkeley National Laboratory (USA), the COBO Department (Prof. J. Vantomme) of the Royal Military Academy of Belgium, the Architectural Engineering Department of the Vrije Universiteit Brussels (Belgium) and two departments of my current home university, the Université Libre de Bruxelles. In Brazil, I am actively collaborating with the Civil Engineering Department (Prof. R.A.M. Silveira) of the Universidade Federal de Ouro Preto, with the Instituto de Física (Profa. M.C. Salvadori) of the Universidade de São Paulo. I have obtained the funding of my postdoctoral research project from the Fonds de la Recherche Scientifique F.R.S. - FNRS of the French-speaking community of Belgium for 3+1 years, with an additional 20.000 of functioning costs. I participated in the setup of a European Erasmus Mundus Joint Doctorate project (the coordinator is the UP Catalunya) with 8 partner universities and several industrial partners.This project grants funding for an estimated 164 Ph.D. fellows for the consortium for a span of 8 years.

Informações coletadas do Lattes em 04/11/2022

Acadêmico

Formação acadêmica

Doutorado em Docteur en Sciences de l'ingénieur

2004 - 2008

Université Libre de Bruxelles
Título: Numerical modeling of the surface and the bulk deformation in a small scale contact. Application to the nanoindentation interpretation and to the micro-manipulation.
Orientador: Philippe Bouillard
Coorientador: Thierry J. Massart. Bolsista do(a): Communauté française de la Belgique, ARC CFB, Bélgica. Palavras-chave: finite element method; experimental-numerical coupling; large strain formulation; computational plasticity; computational contact mechanics; friction. Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos / Especialidade: Mecânica dos Corpos Sólidos, Elásticos e Plásticos. Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica. Grande Área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos / Especialidade: Análise de Tensões. Setores de atividade: Pesquisa e desenvolvimento científico.

Mestrado em M.Sc. in Mechanical Engineering

1998 - 2003

Budapest University of Technology and Economics
Orientador: Eleöd András
com Bolsista do(a): Budapest University of Technology and Economics (BUTE). Palavras-chave: tribology; experimental characterization; finite element method.Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Tribology. Setores de atividade: Pesquisa e desenvolvimento científico; Serviços de arquitetura e engenharia; testes e análises técnicas.

Pós-doutorado

2009 - 0000

Pós-Doutorado. , Université Libre de Bruxelles, ULB, Bélgica. , Bolsista do(a): Fonds de la Recherche Scientifique F.R.S. - FNRS, FNRS, Bélgica. , Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Development of computational methods. , Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Fracture of materials.

Formação complementar

2004 - 2005

Extensão universitária em Diplôme d'Etudes Approfondies. , Université Libre de Bruxelles, ULB, Bélgica.

2003 - 2004

Extensão universitária em Diplôme d'Etudes Approfondies. , Institut National des Sciences Appliquées de Lyon, INSA LYON, França.

Idiomas

Inglês

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Espanhol

Compreende Razoavelmente, Fala Pouco, Lê Bem, Escreve Pouco.

Português

Compreende Razoavelmente, Fala Razoavelmente, Lê Bem, Escreve Pouco.

Francês

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Alemão

Compreende Bem, Fala Razoavelmente, Lê Bem, Escreve Razoavelmente.

Húngaro

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Áreas de atuação

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Computational Development and Modelling.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Corpos Sólidos, Elásticos e Plásticos.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Fracture of materials.

Grande área: Engenharias / Área: Engenharia Civil / Subárea: Computational Structural Mechanics.

Grande área: Engenharias / Área: Engenharia Civil / Subárea: Tribology.

Participação em eventos

(CILAMCE XXXV) XXXV Iberian Latin American Congress on Computational Methods in Engineering. Computational homogenization-based quasi-discrete method with spatial adaptivity for strain localizing heterogeneous materials. 2014. (Congresso).

(ICCES'13) 2013 International Conference on Computational & Experimental Engineering and Sciences. An adaptive homogenization-based quasi-discrete approach for modeling strain localizing heterogeneous materials. 2013. (Congresso).

(ICCCM2013) 3rd International Conference on Computational Contact Mechanics. Coupled experimental-numerical investigation of the mechanical and frictional behavior of a nickel substrate with a thin DLC coating using nanoindentation. 2013. (Congresso).

(COMPLAS XII) XII International Conference on Computational Plasticity. Fundamentals and Applications. An adaptive quasi-discrete method for the localized deformation of heterogeneous materials. 2013. (Congresso).

(WCCM2012) 10th World Congress on Computational Mechanics. An adaptive homogenization-based quasi-discrete method for the fracture of heterogeneous materials. 2012. (Congresso).

(CILAMCE XXXII) XXXII Iberian Latin American Congress on Computational Methods in Engineering. On the influence of design and material parameters on the progressive collapse of reinforced concrete structures. 2011. (Congresso).

(CFRAC 2011) International Conference on Computational Modeling of Fracture and Failure of Materials and Structures. A quasi-discrete multi-scale approach for quasi-brittle failure. 2011. (Congresso).

(MMM2010) Fifth International Conference on Multiscale Materials Modeling. Influence of a sliding velocity dependent friction law on the coupled effect of friction and surface roughness on shallow spherical nanoindentation. 2010. (Congresso).

(COMPLAS X) X International Conference on Computational Plasticity, Fundamentals and Applications. Coupled Friction and Roughness Surface Effects in Shallow Spherical Nanoindentation. 2009. (Congresso).

(ICCCM09) 1st International Conference on Computational Contact Mechanics. Coupled frictional and surface roughness effects in shallow spherical nanoindentation. 2009. (Congresso).

(ISACC2007) The Second International Symposium Atomic cluster collisions: Structure and dynamics from the nuclear to the biological scale. Simulation of the nanoindentation procedure on Nickel on the smallest length scale: a simple atomistic level model. 2007. (Congresso).

(USNCCM09) 9th United States National Congress on Computational Mechanics. Coupled experimental-numerical analysis of nanoindentation on pure Nickel. 2007. (Congresso).

(MMM2006) Third International Conference on Multiscale Materials Modeling. Numerical simulation of the nanoindentation experiment: influence of the experimental uncertainties. 2006. (Congresso).

(ECCCM2006) III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering. Numerical simulation of the nanoindentation experiment: sensitivity analysis of the experimental parameters. 2006. (Congresso).

Participação em bancas

Aluno: Paulo Vicente de Cassia Lima Pimenta

BERKE, PÉTER Z.; Francisco Marcondes; ABREU, H. F. G.; ANTONIO GILSON BARBOSA DE LIMA. Simulação de processos de lingotamento contínuo com ênfase nas tensões térmicas usando o método de volumes finitos aplicado a elementos. 2014. Dissertação (Mestrado em Engenharia e Ciência de Materiais) - Universidade Federal do Ceará.

Aluno: Cyril Daghrir

BERKE, P.; MASSART, THIERRY J.; LACOR, C.; PYL, L.. Experimental and Computational Characterization of Multi-Layered Polymeric Films. 2013. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, THIERRY J.; DELPLANCKE-OGLETREE, M.-P.; S. Godet; BOUILLARD, PH.;BERKE, P.. Odimba. Sélection de variants en cours de transformation martensitique du Fe-Ni 30%: modélisation et expérience. 2012. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, THIERRY J.;BERKE, P.; BOUILLARD, PH.. Andaloussi. Etude numérique de la délamination dans les structures recouvertes de films minces - application à la modélisation de la procédure de nano-indentation. 2010. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, T. J.;BERKE, P.; BOUILLARD, PH.. -D. Bura. Méthode de calcul séquentiellement linéaire pour le comportement à la rupture des structures en maçonnerie. 2010. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, T. J.;BERKE, P.; BOUILLARD, PH.. Hamri. Méthode d'approximation isogéométrique: applications à l'élasticité linéaire et aux problèmes de champs. 2009. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, T. J.;BERKE, P.; BOUILLARD, PH.. Labilloy. Simulation numérique d un contact avec prise en compte du frottement par la méthode du Lagrangien augmenté. 2007. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

MASSART, T. J.;BERKE, P.; BOUILLARD, PH.. Mormont. Approches numériques discrètes pour l évaluation de la capacité portante des maçonneries. 2006. Dissertação (Mestrado em M.Sc. project) - Université Libre de Bruxelles.

Aluno: Cláudio Ernani Martins Oliveira

F. Assis das Neves;R.A.M. SilveiraBERKE, PÉTER Z.; SOUSA JR., J. B. M.. Avaliação Computacional da Segurança e da Robustez Estrutural de Edifícios Atravès da Modelagem Numérica Avançada da Falha e do Colapso Progressivo. 2012. Exame de qualificação (Doutorando em Engenharia Civil) - Universidade Federal de Ouro Preto.

Aluno: Jardel Belo

BERKE, PÉTER Z.; Ferreira T.; Elineudo Pinho de Moura. Nonlinear simulation of the wire-drawing procedure using the Finite Element Method. 2014. Trabalho de Conclusão de Curso (Graduação em Engenharia Metalúrgica) - Universidade Federal do Ceará.

Orientou

Paulo Vicente de Cassia Lima Pimenta

Multi-physics nonlinear simulation of the continuous casting procedure with the Finite Volume Method; Início: 2015; Tese (Doutorado em Engenharia e Ciência de Materiais) - Universidade Federal do Ceará, Universidade Federal do Ceará; (Coorientador);

Mahdi Hatami

Small scale plasticity with confinement and interfacial effects: a combined experimental-computational approach; Início: 2011; Tese (Doutorado em Docteur en Sciences de l'ingénieur) - Université Libre de Bruxelles, Communauté française de la Belgique; (Coorientador);

Mirela Oliveira de Castro

Coupled experimental-numerical study of the wire-drawing procedure; Início: 2015; Trabalho de Conclusão de Curso (Graduação em Engenharia Metalúrgica) - Universidade Federal do Ceará; (Orientador);

Paulo Vicente de Cassia Lima Pimenta

Simulação de processos de lingotamento contínuo com ênfase nas tensões térmicas usando o método de volumes finitos aplicado a elementos; 2014; Dissertação (Mestrado em Metallurgy and Materials) - Universidade Federal do Ceará,; Coorientador: Péter Zoltán Berke;

Odimba; Sélection de variants en cours de transformation martensitique du Fe-Ni 30%: modélisation et expérience; 2012; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

-D; Bura; Méthode de calcul séquentiellement linéaire pour le comportement à la rupture des structures en maçonnerie; 2010; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

Andaloussi; Etude numérique de la délamination dans les structures recouvertes de films minces - application à la modélisation de la procédure de nano-indentation; 2010; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

Hamri; Méthode d'approximation isogéométrique: applications à l'élasticité linéaire et aux problèmes de champs; 2009; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

Labilloy; Simulation numérique d un contact avec prise en compte du frottement par la méthode du Lagrangien augmenté; 2007; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

Mormont; Approches numériques discrètes pour l évaluation de la capacité portante des maçonneries; 2006; Dissertação (Mestrado em M; Sc; project) - Université Libre de Bruxelles,; Coorientador: Péter Zoltán Berke;

Cláudio Ernani Martins Oliveira

Investigation of the robustness and the security of high-rise buildings by modeling their dynamic progressive collapse using multiscale analysis considering material and geometrical nonlinearities; 2015; Tese (Doutorado em Docteur en Sciences de l'ingénieur) - Université Libre de Bruxelles, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Coorientador: Péter Zoltán Berke;

Pajot; Multiscale modeling of irradiated materials: Effect of the localization of the plastic deformation; 2013; Tese (Doutorado em Docteur en Sciences de l'ingénieur) - Université Libre de Bruxelles, Nuclear Research Center of Mol; Coorientador: Péter Zoltán Berke;

Santafé; Effect of concrete rate dependent behaviour on structural progressive collapse; 2011; Tese (Doutorado em Docteur en Sciences de l'ingénieur) - Université Libre de Bruxelles, Royal Military Academy of Belgium; Coorientador: Péter Zoltán Berke;

Jardel de Souza Belo

Nonlinear simulation of the wire-drawing procedure using the Finite Element Method; 2014; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Materiais) - Universidade Federal do Ceará; Orientador: Péter Zoltán Berke;

Produções bibliográficas

OLIVEIRA, C. E. M. ; BATELO, E. A. P. ; BERKE, P. Z. ; SILVEIRA, R. A. M. ; MASSART, T. J. . Nonlinear analysis of the progressive collapse of reinforced concrete plane frames using a multilayered beam formulation. Revista IBRACON de Estruturas e Materiais , v. 7, p. 845-855, 2014.
NAGY, P. M. ; KÜKEMEZEY, I. ISTVAN ; KASSAVETIS, S. ; BERKE, P. ; DELPLANCKE-OGLETREE, M.-P. ; LOGOTHETIDIS, S. . The Effect of Roughness on Nanoindentation Results. Nanoscience and Nanotechnology Letters , v. 5, p. 480-483, 2013.
BERKE, P. Z. ; PEERLINGS, R. H. J. ; MASSART, T. J. ; GEERS, M. G. D. . A homogenization-based quasi-discrete method for the fracture of heterogeneous materials. Computational Mechanics (Berlin. Internet) , v. 54, p. 1-15, 2013.
BERKE, PÉTER Z. . Computational investigation of slip rate dependent friction as a potential contribution to displacement bursts in nanoindentation of nickel. Tribology International , v. 47, p. 167-174, 2012.
MASSART, T. J. ; MERCATORIS, B. C. ; PIEZEL, B. ; BERKE, PÉTER Z. ; LAIARINANDRASANA, L. ; A. Thionnet . Multi- scale modelling of heterogeneous shell structures. Computer Assisted Mechanics and Engineering Sciences , v. 18, p. 53-71, 2011.
SANTAFÉ IRIBARREN, B. ; BERKE, P. ; BOUILLARD, PH. ; VANTOMME, J. ; MASSART, T.J. . Investigation of the influence of design and material parameters in the progressive collapse analysis of RC structures. Engineering Structures , v. 33, p. 2805-2820, 2011.
BERKE, P. ; EL HOUDAIGUI, F. ; MASSART, T.J. . Coupled friction and roughness surface effects in shallow spherical nanoindentation. Wear (Lausanne) , v. 268, p. 223-232, 2010.
BERKE, P. ; TAM, E. ; DELPLANCKE-OGLETREE, M.-P. ; MASSART, T.J. . Study of the rate-dependent behavior of pure nickel in conical nanoindentation through numerical simulation coupled to experiments. Mechanics of Materials (Print) , v. 41, p. 154-164, 2009.
LHERNOULD, M. SAUSSE ; BERKE, P. ; MASSART, T. J. ; RÉGNIER, S. ; LAMBERT, P. . Variation of the Electrostatic Adhesion Force on a Rough Surface due to the Deformation of Roughness Asperities During Micromanipulation of a Spherical Rigid Body. Journal of Adhesion Science and Technology , v. 23, p. 1303-1325, 2009.
BERKE, P. ; MASSART, THIERRY J. . Coupled Friction and Roughness Surface Effects in Shallow Spherical Nanoindentation. In: G. Zavarise; P. Wriggers. (Org.). Trends in Computational Contact Mechanics, Lecture Notes in Applied and Computational Mechanics series. 1ed.: Elsevier, 2011, v. 58, p. 269-289.
BERKE, PÉTER Z. ; DELPLANCKE-OGLETREE, M.-P. ; LYALIN, A. ; SEMENIKHINA, V. ; SOLOV YOV, A. . Simulation of the nanoindentation procedure on Nickel on the smallest length scale: a simple atomistic level model. In: J.-P. Connerade; A.V. Solov'yov. (Org.). Latest Advances in Atomic Cluster Collisions, Structure and Dynamics from the Nuclear to the Biological Scale. 1ed.London: Imperial College Press, 2008, v. , p. 205-224.
PIMENTA, P. V. C. L. ; FERNANDES, B. R. B. ; LIMA, I. C. M. ; BERKE, P. Z. ; Francisco Marcondes . Unilaterally coupled thermal-mechanical analysis of continuous casting processes with linear elasticity. In: (CILAMCE XXXV) XXXV Iberian Latin American Congress on Computational Methods in Engineering, 2014, Fortaleza, Ceará. Proceedings of the CILAMCE XXXV, 2014. p. 1-14.
BERKE, P. Z. ; PEERLINGS, R. ; MASSART, T. J. ; GEERS, M. . Computational homogenization-based quasi-discrete method with spatial adaptivity for strain localizing heterogeneous materials. In: (CILAMCE XXXV) XXXV Iberian Latin American Congress on Computational Methods in Engineering, 2014, Fortaleza, Ceará. Proceedings of the CILAMCE XXXV, 2014. p. 1-8.
OLIVEIRA, C. E. M. ; BERKE, PÉTER Z. ; SILVEIRA, R. A. M. ; MASSART, THIERRY J. . Computational assessment of the progressive collapse of a five storey structure considering two different building codes. In: (COMPDYN2013) 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2013, Kos Island. Proceedings of the 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2013. p. 1-16.
OLIVEIRA, C. E. ; MARCHIS, A. ; BERKE, P. ; R.A.M. Silveira ; MASSART, T. J. . Computational analysis of a reinforced concrete planar frame using corotational multilayered beam finite elements, correlated to experimental results. In: (CILAMCE XXXIV) XXXIV Ibero Latin American Congress on Computational Methods in Engineering, 2013, Pirenópolis. Proceedings of the XXXIV Ibero Latin American Congress on Computational Methods in Engineering, 2013. p. 1-6.
SANTAFE, B. ; BERKE, PÉTER Z. ; MASSART, THIERRY J. ; Ph. Bouillard ; VANTOMME, J. . Effect of concrete rate dependent behaviour on structural progressive collapse. In: (EURODYN 2011) 8th International Conference on Structural Dynamics, 2011, Leuven. Proceedings of the 8th International Conference on Structural Dynamics, 2011. p. 1-6.
BERKE, PÉTER Z. ; HOUDAIGUI, F. E. ; MASSART, THIERRY J. . Influence of a sliding velocity dependent friction law on the coupled effect of friction and surface roughness on shallow spherical nanoindentation. In: (MMM2010) Fifth International Conference on Multiscale Materials Modeling, 2010, Freiburg. Proceedings of the Fifth International Conference on Multiscale Materials Modeling, 2010. p. 1-4.
BERKE, P. ; MASSART, THIERRY J. . Numerical simulation of the nanoindentation experiment: sensitivity analysis of the experimental parameters. In: (ECCCM2006) III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, 2006, Lisbon. Proceedings of the III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, 2006. p. 1-15.
MASSART, T. J. ; MERCATORIS, B. C. ; PIEZEL, B. ; BERKE, PÉTER Z. ; LAIARINANDRASANA, L. ; A. Thionnet . Computational FE^2 scheme for heterogeneous shell structures. In: (CMM-2011) Computer Methods in Mechanics, 2011, Warsaw. Proceedings of the Computer Methods in Mechanics conference, 2011. p. 1-2.
BERKE, PÉTER Z. ; MASSART, THIERRY J. . Coupled frictional and surface roughness effects in shallow spherical nanoindentation. In: (ICCCM09) 1st International Conference on Computational Contact Mechanics, 2009, Lecce. Proceedings of the 1 International Conference on Computational Contact Mechanics, 2009. p. 1-2.
BERKE, P. ; EL HOUDAIGUI, F. ; MASSART, THIERRY J. . Coupled friction and roughness surface effects in shallow spherical nanoindentation. In: (COMPLAS X) X International Conference on Computational Plasticity, Fundamentals and Applications, 2009, Barcelona. Proceedings of the X International Conference on Computational Plasticity, Fundamentals and Applications, 2009. p. 1-4.
BERKE, P. ; DELPLANCKE-OGLETREE, M.-P. ; LYALIN, A. ; SEMENIKHINA, V. ; SOLOV YOV, A. . Simulation of the nanoindentation procedure on Nickel on the smallest length scale: a simple atomistic level model. In: (ISACC2007) The Second International Symposium Atomic cluster collisions: Structure and dynamics from the nuclear to the biological scale, 2007, Darmstadt. Proceedings of The Second International Symposium Atomic cluster collisions: Structure and dynamics from the nuclear to the biological scale, 2007. p. 1-2.
BERKE, P. ; MASSART, THIERRY J. . Numerical simulation of the nanoindentation experiment: influence of the experimental uncertainties. In: (MMM2006) Third International Conference on Multiscale Materials Modeling, 2006, Freiburg. Proceedings of the Third International Conference on Multiscale Materials Modeling, 2006. p. 1-3.
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, THIERRY J. ; GEERS, M. . An adaptive homogenization-based quasi-discrete approach for modeling strain localizing heterogeneous materials. In: (ICCES'13) 2013 International Conference on Computational & Experimental Engineering and Sciences, 2013, Seattle. Proceedings of the 2013 International Conference on Computational & Experimental Engineering and Sciences, 2013. p. 1-1.
BERKE, PÉTER Z. ; GHOULBZOURI, F. E. ; MASSART, THIERRY J. ; DELPLANCKE-OGLETREE, M.-P. . Coupled experimental-numerical investigation of the mechanical and frictional behavior of a nickel substrate with a thin DLC coating using nanoindentation. In: (ICCCM2013) 3rd International Conference on Computational Contact Mechanics, 2013, Lecce. Proceedings of the 3rd International Conference on Computational Contact Mechanics, 2013. p. 1-2.
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, THIERRY J. ; GEERS, M. . An adaptive quasi-discrete method for the localized deformation of heterogeneous materials. In: (COMPLAS XII) XII International Conference on Computational Plasticity. Fundamentals and Applications, 2013, Barcelona. Proceedins of the XII International Conference on Computational Plasticity, 2013. p. 1-1.
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, THIERRY J. ; GEERS, M. . An adaptive homogenization-based quasi-discrete method for the fracture of heterogeneous materials. In: (WCCM2012) 10th World Congress on Computational Mechanics, 2012, São Paulo. Proceedings of the 10th World Congress on Computational Mechanics, 2012. p. 1-1.
BERKE, PÉTER Z. . On the influence of design and material parameters on the progressive collapse of reinforced concrete structures. In: (CILAMCE XXXII) XXXII Iberian Latin American Congress on Computational Methods in Engineering, 2011, Ouro Preto. Procedings of the XXXII Iberian Latin American Congress on Computational Methods in Engineering, 2011. p. 1-1.
NAGY, P. ; KUKEMEZEY, I. ; KASSAVETIS, S. ; BERKE, PÉTER Z. ; DELPLANCKE-OGLETREE, M.-P. . The effect of roughness on nanoindentation results. In: (NN11) 8th International Conference on Nanosciences and Nanotechnologies, 2011, Thessaloniki. Proceedings of the 8th International Conference on Nanosciences and Nanotechnologies, 2011. p. 1-1.
BERKE, P. ; MASSART, T. J. ; PEERLINGS, R. ; GEERS, M. . A quasi-discrete multi-scale approach for quasi-brittle failure. In: (CFRAC 2011) International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, 2011, Barcelona. Proceedings of the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, 2011. p. 1-1.
BERKE, P. ; TAM, E. ; MASSART, THIERRY J. ; DELPLANCKE-OGLETREE, M.-P. . Nanoindentation rate-dependent mechanical properties of Nickel and Titanium. In: AVS 54 International Symposium and Exhibition, 2007, Seattle. Proceedings of the AVS 54 International Symposium and Exhibition, 2007. p. 1-1.
BERKE, PÉTER Z. ; TAM, E. ; MASSART, THIERRY J. . Coupled experimental-numerical analysis of nanoindentation on pure Nickel. In: (USNCCM09) 9th United States National Congress on Computational Mechanics, 2007, San Francisco. Proceedings of the 9th United States National Congress on Computational Mechanics, 2007. p. 1-1.
OLIVEIRA, C. E. ; BATELO, E. A. ; BERKE, P. Z. ; R.A.M. Silveira ; MASSART, T. J. . Nonlinear analysis of the progressive collapse of reinforced concrete plane frames using a multilayered beam formulation. Revista IBRACON de Estruturas e Materiais , 2014.
BERKE, PÉTER Z. ; GHOULBZOURI, F. E. ; MASSART, T. J. ; DELPLANCKE-OGLETREE, M.-P. . Coupled experimental- numerical investigation of the mechanical and frictional behavior of a nickel substrate with a thin DLC coating using nanoindentation. 2013. (Apresentação de Trabalho/Congresso).
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, T. J. ; GEERS, M. . An adaptive homogenization-based quasi-discrete approach for modeling strain localizing heterogeneous materials. 2013. (Apresentação de Trabalho/Congresso).
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, T. J. ; GEERS, M. . An adaptive quasi-discrete method for the localized deformation of heterogeneous materials. 2013. (Apresentação de Trabalho/Congresso).
BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, T. J. ; GEERS, M. . An adaptive homogenization-based quasi-discrete method for the fracture of heterogeneous materials. 2012. (Apresentação de Trabalho/Congresso).
BERKE, PÉTER Z. . On the influence of design and material parameters on the progressive collapse of reinforced concrete structures (plenary lecture). 2011. (Apresentação de Trabalho/Congresso).
BERKE, PÉTER Z. ; PEERLINGS, R. H. J. ; MASSART, T. J. ; GEERS, M. . A quasi-discrete multi-scale approach for quasi-brittle failure. 2011. (Apresentação de Trabalho/Congresso).
BERKE, P. Z. ; MASSART, T. J. . Influence of a sliding velocity dependent friction law on the coupled effect of friction and surface roughness on shallow spherical nanoindentation. 2010. (Apresentação de Trabalho/Congresso).
BERKE, P. ; EL HOUDAIGUI, F. ; MASSART, T. J. . Coupled friction and roughness surface effects in shallow spherical nanoindentation. 2009. (Apresentação de Trabalho/Congresso).
BERKE, P. ; MASSART, T. J. . Coupled frictional and surface roughness effects in shallow spherical nanoindentation. 2009. (Apresentação de Trabalho/Congresso).
BERKE, P. ; DELPLANCKE-OGLETREE, M.-P. ; LYALIN, A. ; SEMENIKHINA, V. ; SOLOV YOV, A. . Simulation of the nanoindentation procedure on Nickel on the smallest length scale: a simple atomistic level model. 2007. (Apresentação de Trabalho/Congresso).
BERKE, P. ; TAM, E. ; MASSART, T. J. . Coupled experimental-numerical analysis of nanoindentation on pure Nickel. 2007. (Apresentação de Trabalho/Congresso).
BERKE, P. ; MASSART, T. J. . Numerical simulation of the nanoindentation experiment: influence of the experimental uncertainties. 2006. (Apresentação de Trabalho/Congresso).
BERKE, P. ; MASSART, T. J. . Numerical simulation of the nanoindentation experiment: sensitivity analysis of the experimental parameters. 2006. (Apresentação de Trabalho/Congresso).

Outras produções

BERKE, P. . QDM. 2009.

BERKE, PÉTER Z. ; PEERLINGS, R. ; MASSART, THIERRY J. . MTFEM . 2004.

BERKE, PÉTER Z. ; GALA, J. ; KERMISCH, C. . Tout autre chose. 2010.

BERKE, PÉTER Z. . Nonlinear multi-scale finite element modeling of the progressive collapse of reinforced concrete structures. 2014. (Curso de curta duração ministrado/Outra).

BERKE, P. Z. . RELATÓRIO SOBRE O PROJETO DEPROFESSOR VISITANTE DURANTE O PERÍODO DE DEZEMBRO DE 2013 A SETEMBRO DE 2014. 2014. (Relatório de pesquisa).

BERKE, PÉTER Z. . Geometrically nonlinear finite element modelling of linear elastic truss structures. 2013. (Curso de curta duração ministrado/Outra).

BERKE, P. Z. . Nonlinear finite element modeling in metal forming. 2013. (Curso de curta duração ministrado/Outra).

BERKE, PÉTER Z. . Introduction to nonlinear finite element modeling. 2012. (Curso de curta duração ministrado/Outra).

BERKE, PÉTER Z. . Nonlinear finite element modeling in metal forming. 2012. (Curso de curta duração ministrado/Outra).

Projetos de pesquisa

2009 - 2013

Multi-scale adaptive modelling of quasi-brittle fracture using semi- discrete numerical approaches for geomaterials, Descrição: The main goal of this postdoctoral research project is the development of a novel computational method of relatively low complexity and high efficiency for the fracture of heterogeneous materials. Two scales are distinguished in the proposed methodology: (i) the fine scale of the material microstructure with a continuum type description and (ii) the structural scale on which a discrete description of the material is adopted. The scale coupling is inspired from computational homogenization and domain decomposition techniques. The structural discrete equilibrium formulation is fed by fine scale computations of the material microstructure. This novel multiscale approach has been prototyped for two dimensional problems involving quasi brittle material behavior and periodic microstructures, with the ultimate goal of extending it to random heterogeneous microstructures (e.g. concrete). This project included a one year long research period at the Technische Universiteit Eindhoven (September 2010 - September 2011). The funding comprises 3+1 years of salary for a postdoctoral fellow and 20.000 of functioning costs.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Péter Zoltán Berke - Integrante / Philippe Bouillard - Coordenador., Financiador(es): Université Libre de Bruxelles - Remuneração., Número de produções C, T & A: 7

Prêmios

2008

Ph.D., Université Libre de Bruxelles (ULB).

2003

M.Sc., Budapest University of Technology and Economics (BUTE).

Histórico profissional

Endereço profissional

Universidade Federal do Ceará, Centro de Tecnologia, Departamento de Engenharia Metalúrgica e de Materiais. , Rua Campus do Pici, bloco 729, Pici, 60440554 - Fortaleza, CE - Brasil, Telefone: (85) 92049999

Experiência profissional

2012 - 2012

Universidade Federal do Ceará

Vínculo: Servidor Público, Enquadramento Funcional: Guest lecturer, Carga horária: 15

Outras informações:
Giving a mini-course on the (nonlinear) computational modelling aspects of Metal Forming simulations.

Atividades

11/2013
Pesquisa e desenvolvimento , Centro de Tecnologia, Departamento de Engenharia Metalúrgica e de Materiais.,Linhas de pesquisa
08/2012 - 08/2012
Ensino, Metallurgy and Materials, Nível: Pós-Graduação,Disciplinas ministradas, Metal Forming (15 hours)

2004 - 2008

Université Libre de Bruxelles

Vínculo: Bolsista, Enquadramento Funcional: PhD Researcher, Regime: Dedicação exclusiva.

Outras informações:
Full time PhD Researcher, research project on the computational modeling of nanoindentation in metallic materials.

Atividades

10/2009
Pesquisa e desenvolvimento , Building, Architecture and Town Planning Department (BATir), .,Linhas de pesquisa
10/2004
Pesquisa e desenvolvimento , Materials engineering, characterization, synthesis and recycling (4MAT), .,Linhas de pesquisa
10/2004
Pesquisa e desenvolvimento , Bio, Electro And Mechanical Systems (BEAMS), .,Linhas de pesquisa
09/2011 - 08/2012
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Non-linear modeling of structures (48 hours computer labwork), Non-linear modeling of structures (6 ECTS), Tutor of one group leader of the ULB multidisciplinary engineering project (15 hours)
09/2009 - 10/2010
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Tutor of two group leaders of the ULB multidisciplinary engineering project (30 hours)
09/2008 - 10/2009
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Analyse des structures (24 hours computer labwork), Calcul des structures soumises à séisme (12 hours computer labwork), Introduction à la théorie des structures (12 hours tutorial, class work), Introduction au fluage, au calcul non linéaire et à la stabilité de l équilibre des structures (12 hours computer labwork), Méthodes des éléments finis - Compléments (72 hours computer labwork), Modélisation non linéaire des structures et des matériaux (48 hours computer labwork), Tutor of two group leaders of the ULB multidisciplinary engineering project (30 hours)
09/2007 - 10/2008
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Calcul des structures soumises à séisme (12 hours computer labwork), Eléments de théorie des structures (12 hours computer labwork), Introduction au fluage, au calcul non linéaire et à la stabilité de l équilibre des structures (12 hours computer labwork), Questions actuelles en modélisation (12 hours computer labwork), Théorie des structures et compléments de résistance des matériaux (24 hours tutorial and class work 48 hours computer labwork), Tutor of two group leaders of the ULB multidisciplinary engineering project (30 hours)
09/2005 - 10/2007
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Mécanique des solides et des fluides (24 hours tutorial and class work), Tutor of one group leader of the ULB multidisciplinary engineering project (15 hours)
10/2004 - 09/2007
Pesquisa e desenvolvimento , Building, Architecture and Town Planning Department (BATir), .,Linhas de pesquisa
10/2004 - 10/2005
Ensino, Civil and Architectural Engineering, Nível: Graduação,Disciplinas ministradas, Mécanique des solides et des fluides (24 hours tutorial and class work)

2010 - Atual

Eindhoven University of Technology, TU/e

Vínculo: Colaborador, Enquadramento Funcional: Postdoctoral researcher

Outras informações:
Continuous research collaboration with the Materials Technology group of the TU/e (Profs. M.G.D. Geers and R.H.J. Peerlings) on the development of novel computational approaches for the quasi-brittle fracture of heterogeneous materials.

Atividades

09/2010
Pesquisa e desenvolvimento , Materials Technology Department (MATE), .,Linhas de pesquisa

2011 - Atual

Universidade Federal de Ouro Preto

Vínculo: Colaborador, Enquadramento Funcional: Research collaborator

Outras informações:
Research and teaching collaboration with the Civil Engineering Department of UFOP (Prof. R.A.M. Silveira). Participation in the supervision of C. Oliveira, a Ph.D. student from UFOP, in the context of a sandwich Ph.D. with the Université Libre de Bruxelles.

Atividades

11/2011
Pesquisa e desenvolvimento , Escola de Minas, Departamento de Engenharia Civil.,Linhas de pesquisa
08/2012 - 08/2012
Ensino, Engenharia Civil, Nível: Pós-Graduação,Disciplinas ministradas, Introduction to nonlinear finite element modeling (10 hours)

2009 - 2013

Royal Military Academy of Belgium

Vínculo: Colaborador, Enquadramento Funcional: Research collaborator

Outras informações:
Research collaboration on the computational modelling of the progressive collapse of reinforced concrete buildings with the COBO Deptartment (Prof. J. Vantomme).

Atividades

01/2009
Pesquisa e desenvolvimento , Construction Engineering and Materials (COBO), .,Linhas de pesquisa

2003 - 2004

Institut National des Sciences Appliquees de Lyon

Vínculo: Bolsista, Enquadramento Funcional: Researcher, Regime: Dedicação exclusiva.

Outras informações:
Ph.D. researcher at the Mechanical Engineering Department of INSA de Lyon (Prof. Y. Berthier), obtention of the "Diplôme d'Etudes Approfondies" (initiation to research) in 2004.

Atividades

07/2003 - 09/2004
Pesquisa e desenvolvimento , Département de Génie Mécanique, .,Linhas de pesquisa

2006 - 2007

Goethe Universität Frankfurt am Main

Vínculo: Bolsista, Enquadramento Funcional: Ph.D. Researcher, Carga horária: 16

Outras informações:
Repeated research stays totalizing 6 weeks within a research collaboration initiated with Frankfurt Institute of Advanced Studies (Prof. A.V. Solov'yov) in the EXCELL European network of excellence.

Atividades

05/2006 - 07/2007
Pesquisa e desenvolvimento , Frankfurt Institute for Advanced Studies (FIAS), .,Linhas de pesquisa

2011 - 2013

Vrije Universiteit Brussel

Vínculo: Colaborador, Enquadramento Funcional: Research collaborator

Outras informações:
Research collaboration with the Architectural Engineering Department (Prof. N. De Temmerman). Participation in the supervision of computational modelling activities of a Ph.D. student of the VUB.

Atividades

01/2011
Pesquisa e desenvolvimento , Architectural Engineering, .,Linhas de pesquisa

2004 - 2013

Lawrence Berkeley National Laboratory

Vínculo: Colaborador, Enquadramento Funcional: Reseach collaborator

Outras informações:
Research collaboration with the Molecular Foundry, Imaging and Manipulation Facility, Materials Sciences Division (Prof. D.F. Ogletree) on nanotechnology related subjects, particularly nanoindentation.

Atividades

10/2004
Pesquisa e desenvolvimento , Materials Sciences Division, .,Linhas de pesquisa

2008 - 2010

Institut Superieur D'Architecture Victor Horta de La Ville de Bruxelles

Vínculo: , Enquadramento Funcional: Responsible lecturer, Carga horária: 10

Outras informações:
Responsible lecturer for "Strength of Materials".

Atividades

09/2008 - 10/2010
Ensino, Architecture, Nível: Graduação,Disciplinas ministradas, Résistance des matériaux (24 hours class work), Résistance des matériaux lecture (4 ECTS)

2011 - 2013

Ecole Centrale de Nantes, EC/Nantes