Eduardo Valencia Morales
Possui graduação em Bachelor in Physical Sciences - Universidad Central de las Villas (1982) e doutorado em Doctoral Program in Physical Sciences - Universidad Central de las Villas (1993). Atualmente é professor titular - Universidad Central de las Villas. Tem experiência na área de Engenharia de Materiais e Metalúrgica, com ênfase em Physical Metallurgy and Phase Transformations atuando principalmente nos seguintes temas: kinetics of the phase transformations in solids, transmission electron microscopy, microalloyed steel, precipitation in steels, tempering of low-alloy steels, stainless steel welding, moisture diffusion in wet tropical climate and pozzolanic reaction.
Informações coletadas do Lattes em 02/04/2026
Acadêmico
Formação acadêmica
Doutorado em Doctoral Program in Physical Sciences
1989 - 1993
Universidad Central de Las Villas
Título: Hygroscopicity in Basic Coating Electrodes and Moulding Compounds for Foundry
Orientador: Dr. Narciso Jose Galeano Alvarez
Palavras-chave: Phase Transformations; basic electrodes; moisture diffusion; moulding mixtures; wet tropical climate.Grande área: EngenhariasSetores de atividade: Aeronáutica e Espaço; Elaboração de Combustíveis Nucleares; Fabricação de Máquinas e Equipamentos, Inclusive Máquinas-Ferramenta.
Graduação em Bachelor in Physical Sciences
1978 - 1982
Universidad Central de Las Villas
Título: Fine Structure of the Fe-Ni-Ti-Al Nitriding Alloys
Orientador: Dr. Daniel Codorniu Pujal
Pós-doutorado
2008 - 2008
Pós-Doutorado. , Universidade Federal de São Carlos, UFSCAR, Brasil. , Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil. , Grande área: Engenharias
2007 - 2007
Pós-Doutorado. , Universidade de São Paulo, USP, Brasil. , Bolsista do(a): Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, CAPES, Brasil. , Grande área: Engenharias
2003 - 2004
Pós-Doutorado. , Universidade Federal de São Carlos, UFSCAR, Brasil. , Bolsista do(a): Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, CAPES, Brasil. , Grande área: Engenharias, Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física. , Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física / Especialidade: Transformação de Fases.
2001 - 2002
Pós-Doutorado. , Universidade Federal de São Carlos, UFSCAR, Brasil. , Bolsista do(a): Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, CAPES, Brasil. , Grande área: Engenharias, Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física. , Grande Área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física / Especialidade: Transformação de Fases.
Idiomas
Inglês
Compreende Bem, Fala Razoavelmente, Lê Bem, Escreve Bem.
Espanhol
Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.
Português
Compreende Bem, Fala Bem, Lê Bem, Escreve Pouco.
Francês
Compreende Razoavelmente, Fala Pouco, Lê Razoavelmente, Escreve Pouco.
Áreas de atuação
Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica.
Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física.
Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Transformação de Fases.
Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Estrutura dos Metais e Ligas.
Grande área: Engenharias / Área: Engenharia de Materiais e Metalúrgica / Subárea: Metalurgia Física/Especialidade: Propriedades Mecânicas dos Metais e Ligas.
Participação em eventos
X taller Internacional de Metalurgia y Materiales, MetalMater 22. Microstructures of heat affected zones of lean duplex stailess steel welds under the effect of heat input for ofshore applications. 2022. (Congresso).
Simposio Internacional de Industria. III Convencion Cientifica Internacional.Microestructura y Corrosion por Picadura en Soldadura GMAW de Acero Lean duplex 2304 Bajo el Efecto del Calor de Entrada, Considerando la Formacion de Diferentes Subregiones de la ZAC. 2021. (Simpósio).
X Conferencia Internacional de Ingenieria Mecanica. II Convencion Cientifica Internacional. Ajuste mediante simulacion por elementos finitos entre las variables calor de entrada y tiempo de enfriamiento de la ZTA para soldadura GMAW sobre aceros duplex 2205. 2019. (Congresso).
X Conferencia Internacional de Ingenieria Mecanica. II Convencion Cientifica Internacional. Efecto de la energia de entrada en la soldadura de aceros duplex 2205 y lean duplex 2304 sobre la microestructura y la corrosion por pitting. 2019. (Congresso).
XIV Simposio de la Sociedad Cubana de Fisica.New insights of the generalized Lifshits-Slezov-Wagner distribution theory influenced by a second phase transformation. 2017. (Simpósio).
17th International Microscopy Congress (IMC17), 2010. Microstructural Characterization of Thermal Spray Coatings by Automatic Image Analysis. 2010. (Congresso).
Participação em bancas
CRUZ C. C.; GONZALEZ C:;MORALES, E. V.; PENTON MADRIGAL ARBELIO. La Clinoptilolita Natural Modificada: Estudios Estructurales y Propiedades de Adsorción de Dióxido de Carbono. 2011. Tese (Doutorado em Programa doctoral en Ciencia de los Materiales) - Universidad de La Habana.
Lariot Sanchez, C.; ARES O.; CRUZ C. C.;MORALES, E. V.. Estudio de Defectos Planares en Aleaciones Intermetálicas y Tierras Raras con Estructura Cristalina de Capas y su Correlación con Propiedades Magnéticas. 2006. Tese (Doutorado em Programa doctoral en Ciencia de los Materiales) - Universidad de La Habana.
Lariot Sanchez, C.; ARES O.; CRUZ C. C.; GONZALEZ C:;MORALES, E. V.. Refinamiento Estructural en Hexacianoferratos. Fenómenos Térmicamente Inducidos y Propiedades Magnéticas Asociadas.. 2006. Tese (Doutorado em Programa doctoral en Ciencia de los Materiales) - Universidad de La Habana.
MORALES, E. V.; GONZALEZ, M. R.; Scott A. D.; Villar-Cociña, E.; MARTÍNEZ L. B.. Concurso de pruebas para obtener la categoría principal de profesor titular con dedicación exclusiva en la UCLV. 2010. Universidad Central de las Villas.
MORALES, E. V.; GONZALEZ, M. R.; Scott A. D.; MARTÍNEZ L. B.; PERDOMO J. M.. Concurso de pruebas para obtener la categoría principal de profesor titular con dedicación exclusiva en la UCLV. 2008. Universidad Central de las Villas.
MORALES, E. V.; Scott A. D.; GINORIS, J. V. L.; MARTÍNEZ L. B.; PERDOMO J. M.. Concurso de pruebas para obtener la categoría principal de profesor titular con dedicación exclusiva en la UCLV. 2007. Universidad Central de las Villas.
MORALES, E. V.; Scott A. D.; GINORIS, J. V. L.; MARTÍNEZ L. B.; PERDOMO J. M.. Concurso de pruebas para obtener la categoría principal de profesor titular con dedicación exclusiva en la UCLV. 2006. Universidad Central de las Villas.
Scott A. D.; GINORIS, J. V. L.; PERDOMO J. M.; MARTÍNEZ L. B.;MORALES, E. V.. Concurso de pruebas para obtener la categoría principal de profesor titular con dedicación exclusiva en la UCLV. 2005. Universidad Central de las Villas.
ALVAREZ R. P.; AMAYA O.C.; BENAVIDES L.;MORALES, E. V.; Fadragas C. R.. Acreditación de la Carrera de Licenciatura en Física en la Universidad de Oriente. 2005. Universidad del Oriente Cuba.
Orientou
Teoría Generalizada de Lifshitz ? Slezov ? Wagner Perturbada por segundas transformaciones de fase; 2017; Dissertação (Mestrado em Fisica de Metales) - Universidad Central Marta Abreu de Las Villas, ; Orientador: Eduardo Valencia Morales;
A Comparative Study of the Estimation Methods for the Continuous Functions to Predict the Creep Life in Ferritic Steel; 2007; Dissertação (Mestrado em MSc; in Comptational Science) - Universidad Central de las Villas, ; Orientador: Eduardo Valencia Morales;
Kinetics of the Moisture Absorption in Moulding Mixtures for Foundry Cores; ; 2008; Tese (Doutorado em Ciencias Tecnicas) - Universidad Central Marta Abreu de Las Villas, ; Orientador: Eduardo Valencia Morales;
Kinetic Models for Characterization of the Pozzolanic Materials and Moulding Mixtures for Iron Foundry; 2006; Tese (Doutorado em Doctorate in Physical Sciences) - Universidad Central de las Villas, ; Orientador: Eduardo Valencia Morales;
Characterization of a Cuban Stainless Steel and their Quality Evaluation as Welding Material; 1997; Tese (Doutorado em Doctorate in Technical Sciences) - Universidad Central de las Villas, ; Orientador: Eduardo Valencia Morales;
Phase transformations and their influence on the weldability of a A-40 Cuban steel; 1995; Tese (Doutorado em Doctorate in Technical Sciences) - Universidad de Cienfuegos Carlos Rafael Rodriguez, ; Orientador: Eduardo Valencia Morales;
Transformaciones de Fase en las uniones soldadas simuladas de los aceros inoxidables duplex; 2018; Trabalho de Conclusão de Curso; (Graduação em Bachelor in Physical Science) - Universidad Central Marta Abreu de Las Villas; Orientador: Eduardo Valencia Morales;
Teoria dela coalescencia generalizada perturbada por segundas transformaciones de fase; 2016; Trabalho de Conclusão de Curso; (Graduação em Bachelor in Physical Science) - Universidad Central Marta Abreu de Las Villas; Orientador: Eduardo Valencia Morales;
Pronósticos de la Resistencia al Creep variando la Temperatura de Normalización para un acero 9Cr-1Mo modificado; 2012; Trabalho de Conclusão de Curso; (Graduação em Bachelor in Physical Science) - Universidad Central Marta Abreu de Las Villas; Orientador: Eduardo Valencia Morales;
Coalescencia Perturbada por segundas transformaciones de fase; 2011; Trabalho de Conclusão de Curso; (Graduação em Bachelor in Physical Science) - Universidad Central Marta Abreu de Las Villas; Orientador: Eduardo Valencia Morales;
Cinética de las Transformaciones de Fase durante el Revenido de una Aleación Fe-Mn-Si-Ti; 2010; Trabalho de Conclusão de Curso; (Graduação em Bachelor Degree in Physical Science) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Caracterización de las Propiedades Mecánicas y Tribológicas de las Camisas de los Motores Diessel D-65 y D-240; ; 1993; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Análisis Metalográfico de las Camisas D-65 de los Motores Yunz y Mtz-80 Recuperados por Deformación Plástica en Caliente; 1992; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad de Cienfuegos Carlos Rafael Rodriguez; Orientador: Eduardo Valencia Morales;
Transformaciones de Fase en Aceros de Baja Aleación; 1992; Trabalho de Conclusão de Curso; (Graduação em Licenciatura en Física) - Universidad del Oriente Cuba; Orientador: Eduardo Valencia Morales;
Régimen Óptimo de Soplado por CO2 en Mezclas de Moldeo a Base de Silicato de Sodio; 1991; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Caracterización de la Cinética de Humectación en Mezclas para Moldes y Machos; 1991; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Higroscopicidad en Materiales Porosos; 1991; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Estudio sobre la Recuperación de Aros de los Motores D-65 y D-240; 1991; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Comportamiento en Condiciones de Alta Humedad Relativa de Electrodos Básicos Yohn 13/45 y Yohn 13/55; 1987; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Vasallol; Comportamiento en Condiciones de Baja Humedad Relativa de los Electrodos Básicos; 1987; Trabalho de Conclusão de Curso; (Graduação em Graduación de Ingeniería Mecánica) - Universidad Central de las Villas; Orientador: Eduardo Valencia Morales;
Produções bibliográficas
-
MORALES, EDUARDO V. ; CRUZ-CRESPO, AMADO ; POZO-MOREJÓN, JUAN A. ; ORIA, JORGE V. M. ; ARAUJO, LEONARDO S. ; BOTT, IVANI S. . Microstructural characteristics of different heat-affected zones in welded joints of UNS S32304 duplex stainless steel using the GMAW process: analysis of the pitting corrosion resistance. Corrosion Reviews , v. 42, p. 93-105, 2024.
-
Morales, E.V. ; BETANCOURT, G. ; OLAYA, L. ; Bott, I.S. . Some Insight on the Heat-affected Zone Strengthening Mechanisms in Duplex Stainless Steels. MATERIALS RESEARCH , v. 25, p. 1-11, 2022.
-
V. MORALES, E. ; BETANCOURT, G. ; FERNANDES, J.R. ; BATISTA, G.Z. ; Bott, I.S. . Hardening mechanisms in a high wall thickness sour service pipe steel API 5L X65 before and after post-welding heat treatments. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , v. 143612, p. 143612, 2022.
-
Morales, E.V. ; POZO, J.A. ; OLAYA, L. ; KASSAB, E. ; PONCIANO, J.A.C. ; GHAVAMI, K. ; Bott, I.S. . Remarks on the evolution and performance of the different austenite morphologies at the simulated HAZs of a 2205 duplex stainless steel. Journal of Materials Research and Technology-JMR&T , v. 8, p. 3936-3949, 2019.
-
FERNÁNDEZ NOA, C.E. ; SILVA GONZÁLEZ, R. ; GHAVAMI, K. ; Bott, I.S. ; Morales, E.V. . Some remarks about the kinetics of the competitive growth in multicomponent systems. JOURNAL OF ALLOYS AND COMPOUNDS , v. 745, p. 365-369, 2018.
-
POZO-MOREJÓN, JUAN A. ; SOUZA, LUIS F. GUIMARAES DE ; GUERRA, THIAGO ; MORALES, E. V. ; BOTT, I. S. ; CRUZ-CRESPO, AMADO ; PÉREZ, OSNIEL RODRÍGUEZ . Ajuste de los Calores de Entrada que se Corresponden con los Tiempos de Enfriamiento de la ZAT en Soldadura GMAW Sobre Acero Dúplex 2205 Empleando la Simulación por Elementos Finitos. Soldagem & Inspecao , v. 23, p. 413-422, 2018.
-
MORALES, E. V. ; Bott, I. S. ; SILVA, R. A. ; MORALES, A. M. ; DE SOUZA, L. F. G. . Characterization of Carbon-Rich Phases in a Complex Microstructure of a Commercial X80 Pipeline Steel. Journal of Materials Engineering and Performance , v. 25, p. 2736-2745, 2016.
-
FERNANDES, JOSÉ ROBERTO ; BATISTA, GILMAR ZACCA ; Morales, Eduardo Valencia ; BOTT, IVANI DE SOUZA . EFEITO DO TRATAMENTO TÉRMICO DE ALÍVIO DE TENSÕES NA MICROESTRUTURA E PROPRIEDADES DE UM TUBO API 5L X65MS. TECNOLOGIA EM METALURGIA, MATERIAIS E MINERAÇÃO (IMPRESSO) , v. 13, p. 356-364, 2016.
-
SILVA, RAFAEL DE ARAUJO ; SOUZA, LUÍS FELIPE GUIMARÃES DE ; Morales, Eduardo Valencia ; RIOS, PAULO RANGEL ; BOTT, IVANI DE SOUZA . Formation of Microphases and Constituents from Remaining Austenite Decomposition in API X80 Steel Under Different Processing Conditions. MATERIALS RESEARCH , v. 18, p. 908-917, 2015.
-
MORALES, E. V. ; R. Silva Gonzalez ; Bott, I. S. ; KESTENBACH, H. J. . Interacción de los modos de precipitación en el endurecimiento de aceros microaleados. Revista Cubana de Física , v. 32, p. 80-86, 2015.
-
DONIS-DÍAZ, C.A. ; MURO, A.G. ; BELLO-PÉREZ, R. ; Morales, E.V. . A hybrid model of genetic algorithm with local search to discover linguistic data summaries from creep data. Expert Systems with Applications , v. 41, p. 2035-2042, 2014.
-
Morales, E.V. ; SILVA, R.A. ; Bott, I.S. ; PACIORNIK, S. . Strengthening mechanisms in a pipeline microalloyed steel with a complex microstructure. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing , v. 585, p. 253-260, 2013.
-
Morales, E.V. ; Galeano Alvarez, N.J. ; Morales, A.M. ; Bott, I.S. . Precipitation kinetics and their effects on age hardening in an Fe?Mn?Si?Ti martensitic alloy. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing , v. 534, p. 176-185, 2012.
-
Villar-Cociña, Ernesto ; MORALES, E. V. ; Santos, Sergio F. ; Savastano Jr., Holmer ; Frías, Moisés . Pozzolanic behavior of bamboo leaf ash: Characterization and determination of the kinetic parameters. Cement & Concrete Composites , v. 33, p. 68-73, 2011.
-
Mesquita, R. A. ; Barbosa, C. A. ; MORALES, E. V. ; Kestenbach, H.-J. . Effect of Silicon on Carbide Precipitation after Tempering of H11 Hot Work Steels. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science , v. 42, p. 461-472, 2011.
-
MORALES, E. V. ; Vega-Leiva, J. A. ; Salinas, H.L. Lopez ; Bott, I. S. . Analysis of precipitation mechanisms in tempering of low-alloy steels using the kinetic theory of the overlapping transformations. Phase Transitions (Print) , v. 84, p. 179-191, 2011.
-
Fadragas, Carlos R. ; MORALES, E. V. ; Muñoz, J. A. ; Bott, I. S. ; Lariot Sánchez, C. A. . An Alternative Cu-Based Bond Layer for Electric Arc Coating Process. Journal of Thermal Spray Technology (Print) , v. 20, p. 1183-1191, 2011.
-
R.A. MESQUITA ; C.A. BARBOSA ; MORALES, E. V. ; KESTENBACH, H. J. . Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels. Materials Science Forum , v. 636-63, p. 612-617, 2010.
-
LEIVA, J. V. ; MORALES, E. V. ; E. Villar-Cociña ; DONIS, C. A. ; Ivani de S. Bott . Kinetic Parameters during the Tempering of Low Alloy Steel through the Non-Isothermal Dilatometry. Journal of Materials Science , v. 45, p. 418-428, 2010.
-
MORALES, E. V. ; E. Villar-Cociña ; FRIAS, M. ; S. F. Santos ; SAVASTANO JR, H. . Effects of calcining conditions on the microstructure of sugar cane waste ashes (SCWA): Influence in the pozzolanic activation. Cement & Concrete Composites , v. 31, p. 22-28, 2009.
-
C. A. DONIS ; MORALES, E. V. ; Carlos Morell Perez . Support vector machine model for regression applied to the estimation of the creep rupture stress in ferritic steels. Revista Facultad de Ingeniería Universidad de Antioquia , v. 47, p. 55-61, 2009.
-
E. Villar-Cociña ; FRIAS, M. ; MORALES, E. V. ; SAVASTANO JR, H. . Study of the pozzolanic reaction kinetics in sugar cane bagasse?clay ash/calcium hydroxide system: kinetic parameters and pozzolanic activity. Advances in Cement Research , v. 21, p. 23-30, 2009.
-
RIVERO L. P. ; RUIZ, J. H. ; MORALES, E. V. ; E. Villar-Cociña ; López Velasquez A. . Desarrollo de una nueva mezcla autofraguante para machos de fundición. Boletín de la Sociedad Española de Cerámica y Vidrio , v. 48, p. 53-64, 2009.
-
E. Villar-Cociña ; FRIAS, M. ; MORALES, E. V. . Sugar Cane Wastes as Pozzolanic Materials: Application of Mathematical Model. ACI Materials Journal , v. 105, p. 258, 2008.
-
FRIAS, M. ; E. Villar-Cociña ; MORALES, E. V. . Characterisation of sugar cane straw waste as pozzolanic material for construction: Calcining temperature and kinetic parameters. Waste Management (Elmsford) , v. 27, p. 533-538, 2007.
-
E. Villar-Cociña ; FRIAS, M. ; MORALES, E. V. ; M.I.Sanchez de Rojas . An evaluation of different kinetic models for determining the kinetic coefficients in sugar cane straw-clay ash/lime system. Advances in Cement Research , v. 18, p. 17-26, 2006.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; MORALES, E. V. . Role of interphase precipitation in microalloyed hot strip steels. Materials Science and Technology , v. 22, p. 615-626, 2006.
-
GALLEGO, J. ; KESTENBACH, H. J. ; CAMPOS, S. S. ; MORALES, E. V. . Efeitos da composição química e da temperatura de transformação sobre o endurecimento por precipitação interfásica em aços microligados. Tecnologia em Metalurgia e Materiais (São Paulo. Impresso) , v. 2, p. 50-57, 2005.
-
RUIZ, J. H. ; MORALES, E. V. ; E. Villar-Cociña ; LEIVA, J. V. ; MUNOZ, J. A. . Optimization of mixtures with liquid glass and CO2 process. Revista de la Facultad de Ingeniería. Universidad de Tarapacá , v. 13, p. 51-57, 2005.
-
E. Villar-Cociña ; FRIAS, M. ; MORALES, E. V. ; M.I.Sanchez de Rojas . Validation of a kinetic-diffusive model to characterize pozzolanic reaction kinetics in sugar cane straw-clay ash/lime systems. Materiales de Construcción (Madrid) , v. 55, p. 29-40, 2005.
-
MORALES, E. V. ; LEIVA, J. V. ; E. Villar-Cociña ; MUNOZ, J. A. ; Fadragas C. R. . Some comments about the errors in the Avrami plots. Scripta Materialia (Oxford) , v. 52, p. 217-219, 2005.
-
E. Villar-Cociña ; MORALES, E. V. ; LEIVA, J. V. ; MUNOZ, J. A. . Kinetics of the water absorption in GGBS-concretes: A capillary-diffusive model. Computers and Concrete, an International Journal (Print) , v. 2, p. 19-30, 2005.
-
FRIAS, M. ; E. Villar-Cociña ; M.I.Sanchez de Rojas ; MORALES, E. V. . The effect that different pozzolanic activity methods has on the kinetic constants of the pozzolanic reaction in sugar cane straw-clay ash/lime systems: Application of a kineticâ¿"diffusive model. Cement and Concrete Research , v. 35, p. 2137-2142, 2005.
-
CAMPOS, S. S. ; MORALES, E. V. ; KESTENBACH, H. J. . Detection of interphase precipitation in microalloyed steels by microhardness measurements. Materials Characterization , v. 52, p. 379-384, 2004.
-
E. Villar-Cociña ; MORALES, E. V. ; RUIZ, J. H. ; LEIVA, J. V. . The characterization of sugar industry solid waste as pozzolanic materials: A study and modeling of the reaction kinetics. Journal of Solid Waste Technology and Management , v. 30, p. 100-111, 2004.
-
MORALES, E. V. ; GALEANO, N. J. ; LEIVA, J. V. ; CASTELLANOS, L. M. ; E. Villar-Cociña ; RUIZ, J. H. . Kinetic theory of the overlapping phase transformations: case of the dilatometric method. Acta Materialia (Oxford) , v. 52, p. 1083-1088, 2004.
-
GALLEGO, J. ; MORALES, E. V. ; KESTENBACH, H. J. . Estudo Quantitativo do Endurecimento por Precipitação em Aços Microligados ao Vanádio. Metalurgia e Materiais , v. 59, p. 8-12, 2003.
-
MORALES, E. V. ; E. Villar-Cociña ; R. González-Rodríguez ; RUIZ, J. H. . Kinetics of the pozzolanic reaction between lime and sugar cane straw ash by electrical conductivity measurement: A kinetic-diffusive model. Cement and Concrete Research , v. 33, p. 517-524, 2003.
-
Campos, S.S. ; Morales, E.V. ; Kestenbach, H.-J. . A Quantitative Study of Interphase Precipitation in a Commercial Microalloyed Steel. Materials Science Forum (Online) , v. 426-432, p. 1517-1522, 2003.
-
MORALES, E. V. ; KESTENBACH, H. J. ; CAMPOS, S. S. ; GALLEGO, J. . Discussion of -Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel-. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science , v. 34, p. 1013-1017, 2003.
-
MORALES, E. V. ; GALLEGO, J. ; Kestenbach, H. -J. . On coherent carbonitride precipitation in commercial microalloyed steels. Philosophical Magazine Letters (Print) , v. 83, p. 79-87, 2003.
-
RUIZ, J. H. ; MORALES, E. V. ; E. Villar-Cociña ; LEIVA, J. V. . Difusión de humedad en mezclas de moldeo para machos de fundición. Boletín de la Sociedad Española de Cerámica y Vidrio , v. 41, p. 253-258, 2002.
-
RUIZ, J. H. ; MORALES, E. V. ; E. Villar-Cociña . Influencia de la humedad en el comportamiento de la resistencia a la compresión en mezclas de moldeo. Boletín de la Sociedad Española de Cerámica y Vidrio , v. 40, p. 107-111, 2001.
-
E. Villar-Cociña ; MORALES, E. V. ; R. González-Rodríguez . Kinetics of absorption of the environmental moisture in grainy materials. Revista Mexicana de Fisica , v. 47, p. 37-42, 2001.
-
MORALES, E. V. ; E. Villar-Cociña ; RUIZ, J. H. ; LEIVA, J. V. . Moisture Diffusion in Some Sand-Molasses Mixtures for Iron Foundry Cores. Foundry Management & Technology , v. 109, p. 58-62, 2001.
-
MORALES, E. V. ; CAMPOS, S. S. ; KESTENBACH, H. J. . On strengthening mechanisms in commercial Nb-Ti hot strip steels. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science , v. 32, p. 1245-1248, 2001.
-
MUNOZ, J. A. ; MORALES, E. V. . Caracterizacion Microestructural y Propiedades Mecánicas de Recubrimientos por Metalizado. Revista Austro Ingenieria , v. 9, p. 56-58, 2001.
-
RUIZ, J. H. ; MORALES, E. V. ; ALFONSO C. A. ; LEIVA, J. V. . Permanencia Límite de Machos de Fundición previo a la Colada. Revista Minerìa y Geologìa , v. XVIII, p. 47-51, 2001.
-
Portugal, U. L. ; Marques, C. M. P. Jr. ; Araujo, E.C.C. ; MORALES, E. V. ; Giotto, M.V. ; Bueno, J.M.C. . CO2 Reforming of Methane Over Zeolite-Y Supported Ruthenium Catalysts. Applied Catalysis. A, General , v. 193, p. 173-183, 2000.
-
CASARIN, S. J. ; KESTENBACH, H. J. ; MORALES, E. V. . Influence of Intercritical Tempering Treatment Carried in the (a+g) Two-Phase Field Fe-Ni Diagram on 9% Ni Retained Austenite Steel. Revista de Metalurgia , v. 35, p. 148-154, 1999.
-
JORDAO, M. H. ; MORALES, E. V. ; SIMOES, V. ; CARDOSO, D. . Characterization of Pt/HUSY and Pt-Ni/HUSY Catalysts by Transmission Electron Microscopy. Materials Research-Ibero-american Journal of Materials , v. 2, p. 219-223, 1999.
-
KESTENBACH, H. J. ; MORALES, E. V. . Transmission Electron Microscopy of Carbonitride Precipitation in Microalloyed Steels. Acta Microscópica , v. 7, p. 22-33, 1998.
-
MORALES, E. V. ; KESTENBACH, H. J. . Origin and Dispersion Strengthening of Carbonitrides in a Commercial Hot Strip Microalloyed Steel. Revista de Metalurgia , v. 34, p. 488-498, 1998.
-
MORALES, E. V. ; ALMONACID, C. G. ; ZALA, A. . Alite Textures of Portland Cement Clinker Using X-Ray Diffraction. Cemento Hormigón , v. 69, p. 596-605, 1998.
-
GONZALEZ, M. R. ; GALEANO, N. J. ; MORALES, E. V. ; DIAZ-VELEZ, D. A. . The Use of Surface Waves and Attenuation of Ultrasonic Pulse for the Evaluation of Concrete Structure Defects. Cemento Hormigón , v. 67, p. 709-713, 1996.
-
MORALES, E. V. ; GALEANO, N. J. ; SILVA, R. . Solute Segregation and Control Methods of the Delta Ferrite in Austenitic Stainless Steels Welding Joints. Revista de Soldadura , v. 25, p. 65-73, 1995.
-
MORALES, E. V. ; GALEANO, N. J. . Hygroscopic behaviour of certain basic-coated electrodes in a wet tropical climate. Welding International , v. 8, p. 208-213, 1994.
-
MORALES, E. V. ; GALEANO, N. J. . Hygroscopic Behavior of Certain Basic-Coated Electrodes in Wet Tropical Climate. Revista de Soldadura , v. 23, p. 94-100, 1993.
-
MORALES, E. V. ; GALEANO, N. J. ; CASTELLANOS, L. M. ; SILVA, R. . Delta Ferrite and Solute Distribution in Welding Joints of Austenitic Stainless Steels. Boletín Técnico de la Central Electronuclear de Juraguá , v. V, p. 33-46, 1992.
-
MORALES, E. V. ; GALEANO, N. J. . Influence of Wet Tropical Climate on Humectation Kinetics of Basic Electrodes. Rev. Boletín Técnico de la Central Electronuclear de Juraguá , v. V, p. 7-15, 1992.
-
MORALES, E. V. ; GALEANO, N. J. . Effect of Initial Water Content on Moisture Kinetics in Several-Times Calcinated Basic Electrodes. Rev. Construcción de Maquinaria , v. 16, p. 26-32, 1991.
-
MORALES, E. V. ; GALEANO, N. J. ; FUENTES, R. F. . Kinetic Behavior for Moisture in Certain Basic-Coated Electrodes. Rev. Construcción de Maquinaria , v. 16, p. 61-68, 1991.
-
MORALES, E. V. ; GALEANO, N. J. . Model for Diffusion of Moisture in Certain Basic-Coated Electrodes. Rev. Construcción de Maquinaria , v. 16, p. 42-49, 1991.
-
MORALES, E. V. ; GALEANO, N. J. ; FUENTES, R. F. . Behavior of Basic Electrodes under Several Humectations. Boletín Técnico de la Central Electronuclear de Juaraguá , v. II, p. 2-17, 1989.
-
MORALES, E. V. ; SOLAS, J. B. ; GALEANO, N. J. ; Lariot Sanchez, C. . The Nitrogen Effect on the Recrystallization Mechanisms in a Fe-2,12% Mn Alloy Highly Deformed. Revista Cubana de Física , v. VIII, p. 79-85, 1988.
-
M. Ronda ; GALEANO, N. J. ; SALINAS, H. L. ; MORALES, E. V. . Kinetic Theory of the Overlapping Processes. Revista Cubana de Física , v. VI, p. 23-31, 1986.
-
Morales, E.V. . Comments About the Strengthening Mechanisms in Commercial Microalloyed Steels and Reaction Kinetics on Tempering in Low-Alloy Steels. In: Romana Vukelic. (Org.). ALLOY STEEL ? PROPERTIES AND USE. Rijeka: Intech, 2011, v. , p. 53-86.
-
BOTT, A. ; DE SOUZA, L. ; LUENGAS, L. ; MORALES, E. . Austenite Transformation in Duplex Stainless Steels under Fast Cooling Rates. In: MS&T19, 2019, Portland. Contributed Papers from MS&T19, 2019. p. 1010.
-
DIAZ, CARLOS ALBERTO DONIS ; BELLO PEREZ, RAFAEL ; Morales, Eduardo Valencia . Using Linguistic Data Summarization in the study of creep data for the design of new steels. In: 2011 11th International Conference on Intelligent Systems Design and Applications (ISDA), 2011, Cordoba. 2011 11th International Conference on Intelligent Systems Design and Applications, 2011. p. 160.
-
R.A. MESQUITA ; C.A. BARBOSA ; MORALES, E. V. ; KESTENBACH, H. J. . Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels. In: The V International Materials Symposium. MATERIAIS 2009., 2009, Lisboa. Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels, 2009.
-
Villar-Cociña, E. ; MORALES, E. V. ; S. F. Santos ; SAVASTANO JR, H. . Bamboo Leaf Ash as Pozzolanic Material: Study of the Reaction Kinetics and Determination of the Kinetic Parameters. In: 10th International Conference on Non-Conventional Materials and Technologies. NOCMAT 2008, 2008, Cali. Bamboo Leaf Ash as Pozzolanic Material: Study of the Reaction Kinetics and Determination of the Kinetic Parameters. Cali: Universidad del Valle, 2008.
-
Villar-Cociña, E. ; FRIAS, M. ; MORALES, E. V. . Sugar Cane Bagasse-Clay Ash as Pozzolanic Material: Study of the Reaction Kinetics and Determination of the Kinetic Parameters. In: 9th International Conference on Non-Conventional Materials and Technologies. NOCMAT 2007, 2007, Maceio. Sugar Cane Bagasse-Clay Ash as Pozzolanic Material: Study of the Reaction Kinetics and Determination of the Kinetic Parameters. Maceio: Universidade de Alagoas, 2007.
-
MORALES, E. V. ; Villar-Cociña, E. ; FRIAS, M. ; S. F. Santos ; SAVASTANO JR, H. . Actividad Puzolánica y Aspectos Microestructurales de las Cenizas de Paja y Bagazo de Caña de Azúcar a través de la Microscopia Electrónica de Transmisión. In: 9th International Conference on Non-Conventional Materials and Technologies. NOCMAT 2007, 2007, Maceio. NOCMAT 2007, 2007.
-
GALLEGO, J. ; MORALES, E. V. ; CAMPOS, S. S. ; KESTENBACH, H. J. . Efeitos da composição química e da temperatura de transformação sobre o endurecimento por precipitação interfásica em aços microligados. In: 59. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2004, São Paulo. Anais do 59. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM). São Paulo : ABM. São Paulo, 2004. p. 2969-2978.
-
GALLEGO, J. ; MORALES, E. V. ; CAMPOS, S. S. ; KESTENBACH, H. J. . Interphase precipitation hardening in commercial hot strip steels. In: 2nd International Conference on Thermomechanical Processing of Steels, TMP '2004, 2004, Liege. TMP '2004. Düsseldorf: Verlag Stahleisen GmbH, 2004. v. 1. p. 138-145.
-
CAMPOS, S. S. ; MORALES, E. V. ; KESTENBACH, H. J. . A Quantitative Study of Interphase Precipitation in a Commercial Microalloyed Steel. In: THERMEC'2003 International Conference on Processing and Manufacturing of Advanced Materials, 2003, Madrid. Materials Science Forum. Zürich, Suiça: Trans Tech Publications, 2003. v. 426. p. 1517-1521.
-
KESTENBACH, H. J. ; GALLEGO, J. ; MORALES, E. V. . Estudo quantitativo do endurecimento por precipitação em aços microligados ao vanádio. In: 57. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2002, São Paulo. Anais do 57. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM). São Paulo, 2002. p. 1686-1695.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; MORALES, E. V. . Orientações preferenciais da precipitação interfásica em aços microligados. In: 57. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2002, São Paulo. Anais do 57. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2002. São Paulo: ABM, 2002. p. 1923-1931.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; MORALES, E. V. . Precipitação interfásica em aços microligados comerciais com diferentes teores de elementos microligantes. In: 56. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2001, Belo Horizonte, MG.. Anais do 56. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 2001. p. 370-379.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; GALLEGO, J. ; MORALES, E. V. . Compositional effects in commercial microalloyed hot strip steels. In: HSLA Steels '2000, 2000, Beijing. HSLA Steels 2000, 2000, Xi'an, China. Beijing: Metallurgical Industry Press, 2000. p. 629-634.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; GALLEGO, J. ; MORALES, E. V. . Efeitos da composição química sobre a resistência mecânica em aços microligados após laminação industrial. In: SULMAT 2000 (Congresso em Ciência de Materiais da Região Sul), 2000, Joinville, SC. SULMAT 2000 - Congresso em Ciência de Materiais da Região Sul, 2000. p. 337-346.
-
CARDOSO, D. ; JORDAO, M. H. ; MORALES, E. V. ; MONTES, A. . Isomerização do n-hexano sobre Catalisadores Ni, Pt/HUSY e Caracterização por Microscopia Eletrônica de Transmissão. In: 10 Congresso Brasileiro de Catálise, 1999, Salvador. 10 Congresso Brasileiro de Catálise. Salvador, 1999. p. 144-151.
-
KESTENBACH, H. J. ; MORALES, E. V. ; GALLEGO, J. . Aplicações do Modelo de Orowan-Ashby ao Endurecimento por Precipitação em Aços Microligados. In: 53. Congresso Anual da Associação Brasileira de Metalurgia e Materiais (ABM), 1998, Belo Horizonte. Congresso de Tecnologia Metalúrgica e Materiais, 1998, 1998. p. 1620-1630.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; MORALES, E. V. . Endurecimento de Aços Microligados com Processamento para Tiras a Quente. In: 53. Congresso Anual da Associação Brasileira de Metalurgia e Materais (ABM), 1998, Belo Horizonte. Congresso de Tecnologia Metalúrgica e Materiais, 1998, 1998. p. 1723-1736.
-
MORALES, E. V. ; MUNOZ, J. A. ; PACIORNICK S. ; Bott, I. S. ; Lariot Sanchez, C. . Microstructural Characterization of Thermal Spray Coatings by Automatic Image Analysis. In: International Microscopy Congress -IMC 17, 2010, Rio de Janeiro. Microstructural Characterization of Thermal Spray Coatings by Automatic Image Analysis, 2010.
-
DONIS, C. A. ; Carlos Morell Perez ; MORALES, E. V. . Comparative study of PSO and back-Propagation for training an MLP neural network in the estimation of the creep rupture stress in ferritic steels. In: MAEB'09, VI Spanish Congress on Metaheuristics, Evolutionary and Bio-Inspired Algorithms, 2009, Málaga. Comparative study of PSO and back-Propagation for training an MLP neural network in the estimation of the creep rupture stress in ferritic steels. Málaga, 2009.
-
KESTENBACH, H. J. ; CAMPOS, S. S. ; GALLEGO, J. ; MORALES, E. V. . TEM observations of interphase precipitation in microalloyed hot strip steels.. In: 16th International Microscopy Congress (IMC16), 2006, 2006, Sapporo. Proceedings of the 16th International Microscopy Congress (IMC16), 2006, 2006. v. 3. p. 1943-1943.
-
C. A. DONIS ; MORALES, E. V. ; Carlos Morell Perez . Estimación de la tensión de ruptura por termofluencia en aceros ferríticos utilizando modelos de Inteligencia Artificial. In: 5th International Congress on Mechanical Engineering COMEC 2008, 2008, Santa Clara. COMEC 2008, 2008.
-
C. A. DONIS ; MORALES, E. V. ; Carlos Morell Perez . Redes Neuronales vs SVM en la estimación de la Tensión de Ruptura por Termofluencia en aceros ferríticos. In: X Congreso Nacional de Matemática y Computación, 2008, Havana. COMPUMAT 2008, 2008.
-
LEIVA, J. V. ; MORALES, E. V. ; Villar-Cociña, E. ; C. A. DONIS . Cinética no-isotérmica en aceros de baja aleación. In: 9no Congreso de la Sociedad Cubana de Física, 2008, Havana. 9no Congreso de la Sociedad Cubana de Física, 2008.
-
KESTENBACH, H. J. ; GALLEGO, J. ; MORALES, E. V. . On coherency strains of carbonitride precipitation in ferrite.. In: 15th International Congress on electron Microscopy (ICEM-15), 2002, 2002, Durban. Proceedings of the 15th International Congress on electron Microscopy (ICEM-15), 2002., 2002. v. 1. p. 765-766.
-
Bueno, J.M.C. ; Araujo, E.C.C. ; Marques C. M. P. Jr. ; MORALES, E. V. . CO2 Reforming of Methane over Zeolite-Y Supported Ruthenium catalysts: Effect of preparation procedure. In: 16th NAM, 1999, Boston. 16th NAM. Boston, 1999. p. 100-101.
-
CARDOSO, D. ; JORDAO, M. H. ; MORALES, E. V. ; SIMOES, V. . Characterization of Pt/HUSY and Pt-Ni/HUSY Catalysts by Transmission Electron Microscopy. In: 1st. Brazilian Symposium on Structurology, 1998, Belo Horizonte. Proceedings of the 1st. Brazilian Symposium on Structurology. Belo Horizonte, 1998.
-
RUIZ, J. H. ; MORALES, E. V. ; RIVERO L. P. . Higroscopicidad en mezclas de moldeo para machos de fundición. In: Foro Internacional Fundición'95, 1995, Ciudad Habana. Resumenes Fundición '95. Ciudad Habana, 1995. p. 23-24.
-
GALEANO, N. J. ; GONZALEZ, M. R. ; MORALES, E. V. ; CASTILLO T. F. . Análisis estadístico del control de calidad. In: V Simposio de Soldadura, 1993, Santa Clara. Resumenes V Simposio de Soldadura. Santa Clara, 1993. p. 12-12.
-
MORALES, E. V. ; GALEANO, N. J. . Consideraciones teóricas de las curvas de sorción de humedad-tiempo. In: V Simposio de Soldadura, 1993, Santa Clara. Resumenes V Simposio de Soldadura. Santa Clara, 1993. p. 15-15.
-
GALEANO, N. J. ; MORALES, E. V. ; CASTELLANOS, L. M. ; SILVA, R. . Segregación en las uniones soldadas de aceros austeníticos inoxidables. In: III Simposio de Soldadura, 1990, Santa Clara. Resumenes III Simposio de Soldadura. Santa Clara, 1990. p. 14-14.
-
GALEANO, N. J. ; MORALES, E. V. . Influencia del clima tropical húmedo en la cinética de humectación de los electrodos básicos. In: IV Encuentro Técnico. CEN Juraguá., 1990, Cienfuegos. Resumenes IV Encuentro Técnico. CEN Juraguá.. Cienfuegos, 1990. p. 23-23.
-
FUENTES, R. F. ; Chaviano V. A. ; MORALES, E. V. . Cálculo computacional de algunos parámetros prácticos del tratamiento térmico. In: II Simposio de Soldadura, 1989, Santa Clara. Resumenes II Simposio de Soldadura. Santa Clara, 1989. p. 2-2.
-
FUENTES, R. F. ; Cárdenas M. L. ; MORALES, E. V. ; Scott A. D. . Análisis metalográfico por microscopía óptica de depósitos con polvos metálicos del sistema Ni-Cr-B-Si. In: II Simposio de Soldadura, 1989, Santa Clara. Resumenes II Simposio de Soldadura. Santa Clara, 1989. p. 2-2.
-
GALEANO, N. J. ; MORALES, E. V. ; CASTELLANOS, L. M. . Estudio del modo de solidificación y caracterización de la estructura dendrítica en uniones soldadas. In: I Simposio de Soldadura, 1988, Santa Clara. Resumenes I Simposio de Soldadura. Santa Clara, 1988. p. 7-7.
-
MORALES, E. V. ; GALEANO, N. J. ; FUENTES, R. F. . Comportamiento bajo distintas humectaciones de electrodos revestidos básicos. In: I Simposio de Soldadura, 1988, Santa Clara. Resumenes I Simposio de Soldadura. Santa Clara, 1988. p. 10-10.
-
MORALES, E. V. ; GALEANO, N. J. ; FUENTES, R. F. ; Arias P. F. . Efecto del contenido de agua inicial en la cinética de humectación de electrodos basicos con repetidas calcinaciones. In: I Simposio de Soldadura, 1988, Santa Clara. Resumenes I Simposio de Soldadura. Santa Clara, 1988. p. 20-20.
-
E. Villar-Cociña ; MORALES, E. V. ; S. F. Santos ; SAVASTANO JR, H. . Bamboo leaf ash as pozzolanic material: study of the reaction kinetics and determination of the kinetic parameters. 2008. (Apresentação de Trabalho/Congresso).
-
MORALES, E. V. ; Villar-Cociña, E. ; FRIAS, M. ; S. F. Santos ; SAVASTANO JR, H. . Actividad Puzolánica y Aspectos Microestructurales de las Cenizas de Paja y Bagazo de Caña de Azúcar a través de la Microscopia Electrónica de Transmisión. 2007. (Apresentação de Trabalho/Congresso).
-
Morales, E.V. . ALLOY STEEL ? PROPERTIES AND USE. Rijeka, 2011. (Prefácio, Pósfacio/Prefácio)>.
Outras produções
MORALES, E. V. ; GALEANO, N. J. . Texto Complementario en Ciencia de los Materiales. 1988. (Desenvolvimento de material didático ou instrucional - Texto Complementario).
MORALES, E. V. ; GALEANO, N. J. . Guía de Estudio en Cincia de Materiales. 1988. (Desenvolvimento de material didático ou instrucional - Guía de Estudio).
Projetos de pesquisa
-
2018 - Atual
Interfacial structure characterization of diferent austenite morphological forms in the simulated HAZ microstructures of DSSs for offshore applications, Descrição: Se detallo en la influencia de las relaciones de orientacion entre las morfologias de la austenita y ferrita sobre los mecanismos de endurecimiento de las zonas afectadas termicamente durante la deformacion en aceros duplex. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Coordenador / Ivani de Souza Bott - Integrante.
-
2015 - Atual
Influence of the welding thermal cycles on the microstructure of the stainless steel for applications offshore, Projeto certificado pelo(a) coordenador(a) Sidnei Paciornik em 18/10/2017., Descrição: The main objective of this project is to carry out a systematic research on the effects of large and low heat input on the microstructure and mechanical-corrosive behavior in the heat affected zones of duplex, super duplex and new lean duplex stainless steels. These results will allow establishing the highest acceptable time-temperature conditions for safe operation of these materials in different aggressive environments. Thus, by using controlled thermal cycles, recent thermodynamical methods and novel simulation procedures will be possible to develop scientific and technical basis for optimal welding operations of new grades of DSSs.. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (1) Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Integrante / Bott, I. S. - Integrante / PACIORNIK, S. - Coordenador / RIOS, PAULO RANGEL - Integrante / Roberto Silva Gonzalez - Integrante / DE SOUZA, L. F. G. - Integrante., Financiador(es): Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Bolsa.
-
2012 - 2014
Origin and Effects of the Precipitation on the Strengthening Mechanisms in the pipelines steels., Descrição: We established the correlation between the rolling schedule of a commercial X80 pipeline steel with the microstructure. The strengthening mechanisms taking into account the chemical composition and the phase transformations during the thermomechanical processing of this steel were calculated. This study from the nano-structure has the aim to understand the effects of later deformations, processes of weld and corrosion resistance of theses API X80 linepipe steels whose technological requirements have been predetermined previously.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Coordenador / Bott, I. S. - Integrante / PACIORNICK S. - Integrante / SILVA, RAFAEL DE ARAUJO - Integrante., Financiador(es): Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do RJ - Bolsa., Número de produções C, T & A: 5
-
2012 - 2012
Origem e efeitos da precipitacao nos mecanismos de endurecimento em tubos API para a industria de petroleo e gas, Descrição: Se calcularon las contribuciones individuales de los mecanismos de endurecimiento a la resistencia total del acero API x80. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (1) . , Integrantes: Eduardo Valencia Morales - Coordenador / Ivani de Souza Bott - Integrante.
-
2008 - 2010
Phase Transformations on Tempering in Fe-Based Alloys., Descrição: The KTOPT is used to characterize the main nucleation and growth protocols during reactions on tempering in low alloy steels and some Fe-based alloys. The fraction transformed of second phases is calculated for both isotermal and non-isothermal transformations on tempering. TEM and mechanical tests are used to show the fundamental steps that control the precipitation reaction during the thermal treatment.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Coordenador / Jorge Vega Leiva - Integrante / Hans Jurgen Kestenbach - Integrante / E. Villar-Cociña - Integrante / Carlos Alberto Donis - Integrante / Ivani de Souza Bott - Integrante., Número de produções C, T & A: 6
-
2007 - 2009
Materiais e tecnologias não-convencionais a plicadas à eco-construção e à engenharia civil: estudo de materiais pozolânicos e fibras a partir de resíduos da cana-de-açúcar, Descrição: We have elaborated a mathematical model that allows us to describe the pozzolanic reaction in either kinetic or kinetic-diffusive regimes. We have studied the influence of the calcination temperature on the pozzolanic activity of the sugar cane straw ashes SCSA. The reaction kinetics of SCS ash-lime mixtures are characterized by physicochemical procedures. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) . , Integrantes: Eduardo Valencia Morales - Integrante / Ernesto Villar Cociña - Coordenador / Jesus Hernandez Ruiz - Integrante., Financiador(es): Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Bolsa., Número de produções C, T & A: 3
-
2004 - 2007
Development of Kinetic Models and Study of Phase Transformations in Alloyed Steels., Descrição: We study the evolution of the fraction transformed during the precipitation reactions in alloyed steels by using some algorithms and neural networks. We use the KTOPT to study the individual nucleation and growth mechanisms in the referred steels.. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (1) Doutorado: (2) . , Integrantes: Eduardo Valencia Morales - Coordenador / Ernesto Villar Cociña - Integrante / Jorge Vega Leiva - Integrante / Jesus Hernandez Ruiz - Integrante / Carlo Alberto Donis - Integrante., Financiador(es): Ministerio de Educación Superior de Cuba - Auxílio financeiro., Número de produções C, T & A: 2
-
2003 - 2005
Evaluation and Determination of the Kinetic Parameters in Pozzolan-Lime-Water System: Modeling of the Pozzolanic Reaction Sugar Cane Waste Ash-Lime., Descrição: We have elaborated a mathematical model that allows us to describe the pozzolanic reaction in either kinetic or kinetic-diffusive regimes. We have studied the influence of calcinating temperature on the pozzolanic activation of sugar cane straw SCS. The reaction kinetics of SCS ash-lime mixtures are characterized by physicochemical procedures.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Integrante / Jorge Vega Leiva - Integrante / Jesus Hernandez Ruiz - Integrante / E. Villar-Cociña - Coordenador / Moisés Frías - Integrante / M.I.Sanchez de Rojas - Integrante / Romulo González Rodríguez - Integrante., Financiador(es): Universidad Central de las Villas - Auxílio financeiro., Número de produções C, T & A: 7
-
2001 - 2008
Precipitation Mechanisms in Microalloyed Steels using Transmission Electron Microscopy, Situação: Concluído; Natureza: Pesquisa. , Integrantes: Eduardo Valencia Morales - Coordenador.
-
1987 - 1995
Phase Transformations and Kinetic Evolution in Solid Materials, UCLV, Descrição: We have studied the carbides precipitation during the tempering of steels. We have elaborated some kinetic models to describe the water absorption in many granulated systems. We have studied the wetting kinetics after baking of basic electrodes and some molding mixtures used in foundry cores.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (5) / Especialização: (1) / Doutorado: (1) . , Integrantes: Eduardo Valencia Morales - Coordenador / Ernesto Villar Cociña - Integrante / Jorge Vega Leiva - Integrante / Jesus Hernandez Ruiz - Integrante / Luis Marcos castellanos - Integrante., Financiador(es): Ministerio de Educación Superior de Cuba - Auxílio financeiro., Número de produções C, T & A: 25
Prêmios
2021
Premio CITMA Prov., Republica de Cuba.
2020
Premio CITMA Prov., Republica de Cuba.
2011
Medal Carlos J. Finlay (Science and Technique), State Council of the Republic of Cuba.
2010
Prize of the Cuban Academy of Sciences, Ministry of Science, Technology and Environment.
2008
Prize of the Cuban Academy of Sciences, Ministry of Science, Technology and Environment.
2008
Special Award of the Ministry of Higher Education in Cuba, Ministry of Higher Education.
Histórico profissional
Endereço profissional
-
Universidad Central Martha Abreus de las Villas, Departamento de Fisíca, UCLV. , Carretera a Camajuani Km 5.5, Santa Clara, Villa Clara, Universidad, 54830 - Santa Clara, - Cuba, Telefone: (42) 281109, Fax: (42) 281608
Experiência profissional
2012 - 2013
Pontifícia Universidade Católica do Rio de Janeiro, PUC-RioVínculo: Professor vistante, Enquadramento Funcional: Pesquisador, Carga horária: 40, Regime: Dedicação exclusiva.
2010 - 2010
Pontificia Universidade Catolica de rio de janeiroVínculo: Professor Visitante, Enquadramento Funcional: Pesquisador, Carga horária: 40, Regime: Dedicação exclusiva.
2007 - 2009
Universidade de São PauloVínculo: Project CAPES-MES/Cuba, Enquadramento Funcional: Professor titular, Regime: Dedicação exclusiva.
1997 - 1998
Universidade Federal de São CarlosVínculo: Professor Visitante, Enquadramento Funcional: Pesquisador, Carga horária: 40, Regime: Dedicação exclusiva.
1995 - 1996
Universidad de IbaguéVínculo: Professor Visitante, Enquadramento Funcional: Professor Adjunto, Carga horária: 40, Regime: Dedicação exclusiva.
Atividades
-
05/1995 - 07/1996
Outras atividades técnico-científicas , Departamento de Física, Departamento de Física.Atividade realizada, Invited researcher of the Cementos Diamante Research Center.
-
01/1995 - 07/1996
Direção e administração, Departamento de Física.Cargo ou função, head of the general physics program.
-
01/1995 - 07/1996
Ensino, Industrial Engineering Program, Nível: GraduaçãoDisciplinas ministradas, general physics
1986 - Atual
Universidad Central de Las VillasVínculo: Servidor Público, Enquadramento Funcional: Professor titular, Carga horária: 40, Regime: Dedicação exclusiva.
Outras informações:
Professor of Physics
Professor of the Materials Science.
Chief of the Materials Science Group at the Central University of Las Villas.
Head of the Department of Physics (1996-2006)
Atividades
-
12/2006
Direção e administração, Departamento de Fisíca, UCLV.Cargo ou função, Coordenador de Programa.
-
09/2005
Ensino, Bachelor in Physical Sciences, Nível: GraduaçãoDisciplinas ministradas, Experimental Methods in Physics I, II, Thermodynamics, Introduction to Statistical Physics, Phase Transformations in Solids, Solid State Physics
-
09/1995
Ensino, Doctoral Program in Physical Sciences, Nível: Pós-GraduaçãoDisciplinas ministradas, Materials Science, Phase Transformation in Metals and Alloys, Transmission Electron Microscopy
-
01/1990
Pesquisa e desenvolvimento, Departamento de Fisíca, UCLV.Linhas de pesquisa
-
01/1996 - 11/2006
Direção e administração, Departamento de Fisíca, UCLV.Cargo ou função, Chefe de Departamento.
-
02/1990 - 07/2005
Ensino, Mechanical and Electrical Engineering Programs, Nível: GraduaçãoDisciplinas ministradas, Electricity and Magnetism, Lab. of General Physics, Mechanics, Optics and Modern Physics
-
07/2003 - 01/2004
Estágios , DEMA. Universidade Federal de Sao Carlos.Estágio realizado, Pos-Doc. to study the interphase precipitation in microalloyed steels by TEM. Introduction to EBSD technique.
-
11/2001 - 05/2002
Estágios , DEMA. Universidade Federal de Sao Carlos.Estágio realizado, Pos-Doc. on the Coherent Carbonitride Precipitation in Commercial Microalloyed Steels and Transmission Electron Microscopy.
-
07/2001 - 09/2001
Estágios , Departamento de Ingeniería. Universidad de Magallanes.Estágio realizado, Design of the Power Plant Steels, Posgraduate Course.
-
10/1999 - 12/1999
Estágios , Dpto. Física. Universidad Nacional de Río Cuarto.Estágio realizado, Thermodynamics of the Solid Solutions, Posgraduate Course.
-
06/1997 - 07/1998
Estágios , DEMA. Universidade Federal de Sao Carlos.Estágio realizado, Pos-Doc. in Strengthening Mechanisms in Commercial Microalloyed Steels using Transmission Electron Microscopy.
-
01/1990 - 12/1995
Direção e administração, Departamento de Fisíca, UCLV.Cargo ou função, Chefe de Laboratorio.
-
07/1995 - 08/1995
Estágios , Departamento de Ingeniería. Universidad de Magallanes.Estágio realizado, Welding Metallurgy and Materials Selection, Posgraduate Course.
-
02/1991 - 07/1994
Ensino, Doctoral Program in Physical Sciences, Nível: Pós-GraduaçãoDisciplinas ministradas, Phase Transformations in Metals and Alloys, Thermodynamics of the Solid Solutions, Transmission Electron Microscopy
-
03/1986 - 12/1989
Direção e administração, Instituto de Soldadura de la Universidad Central de Las Villas.Cargo ou função, Coordenador de Curso.
-
03/1986 - 12/1989
Pesquisa e desenvolvimento, Instituto de Soldadura de la Universidad Central de Las Villas.Linhas de pesquisa
-
03/1986 - 12/1989
Ensino, Mechanical Engineering Program, Nível: GraduaçãoDisciplinas ministradas, General Physics, Heat Treatments, Materials Science
-
04/1988 - 04/1989
Ensino, Specialist in Welding, Nível: EspecializaçãoDisciplinas ministradas, Introduction to Transmission Electron Microscopy
1982 - 1986
Universidad de Cienfuegos Carlos Rafael RodriguezVínculo: Servidor Público, Enquadramento Funcional: Assistant Professor, Carga horária: 40, Regime: Dedicação exclusiva.
Outras informações:
Professor of Metals Science.
Professor of the General Physics.
Atividades
-
09/1982 - 02/1986
Direção e administração, Departamento de Fisíca, UC.Cargo ou função, head of the general physics team.
-
09/1982 - 02/1986
Pesquisa e desenvolvimento, Departamento de Fisíca, UC.Linhas de pesquisa
-
09/1982 - 02/1986
Ensino, Mechanical Engineering Program, Nível: GraduaçãoDisciplinas ministradas, Electricity and Magnetism, Mechanis, Metals Science, Optics
-
06/1985 - 01/1986
Estágios , Centro Nacional de Investigaciones Cientificas, CNIC.Estágio realizado, Ionic Nitriding of the Fe-Mn Alloys and Transmission Electron Microscopy.
Criando um monitoramento
Nossos robôs irão buscar nos nossos bancos de dados todos os processos de Eduardo Valencia Morales e sempre que o nome aparecer em publicações dos Diários Oficiais, avisaremos por e-mail e pelo painel do usuário
Criando um monitoramento
Nossos robôs irão buscar nos nossos bancos de dados todas as movimentações desse processo e sempre que o processo aparecer em publicações dos Diários Oficiais e nos Tribunais, avisaremos por e-mail e pelo painel do usuário
Confirma a exclusão?