Marcela Rodrigues Machado

Possui Doutorado em Engenharia Mecânica - Unicamp/Swansea University , Mestrado em Engenharia Mecânica - Unicamp e graduação em Tecnologia em Mecânica pela Faculdade de Tecnologia de São Paulo. Atualmente é professora adjunto do departamento de engenharia mecânica da Universidade de Brasília. Possuo vasta experiência profissional com projeto mecânico nas áreas de manufatura (projeto de moldes de injeção e estamparia), máquinário, mecanismo, chaparia e desenvolvimento de produto. Tem experiência na área de Engenharia Mecânica com ênfase em Mecânica dos Sólidos atuando nas áreas de vibração, vibroacústica, dinâmica de mecanismo e sistemas, quantificação de incertezas, monitoramento estrutural, problema inverso e estimação de parametros, simulação em elementos finitos e elemento espectral, metamaterial e confiabilidade estrutural.

Informações coletadas do Lattes em 10/08/2025

Acadêmico

Formação acadêmica

Doutorado em Engenharia Mecânica

2012 - 2016

Universidade Estadual de Campinas
Título: spectral approach for damage quatification and parameter estimation in stochastic dynamic systems
Orientador: em ( )
com José Maria Campos Dos Santos. Coorientador: Sondipon Adhikari. Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil.

Mestrado em Engenharia Mecânica

2010 - 2012

Universidade Estadual de Campinas
Título: Quantificação de incertezas e análise de confiabiliade em problemas mecânicos., Ano de Obtenção: 2012
Orientador: José Maria Campos Dos Santos
Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil. Palavras-chave: Confiabilidade estrutural; Detecção de dano estrutural; Detecção e propagação de trinca; Método do elemento espectral; Quantificção de incertezas.Grande área: EngenhariasGrande Área: Engenharias / Área: Engenharia Mecânica / Subárea: Projetos Mecânicos. Grande Área: Engenharias / Área: Engenharia Mecânica / Subárea: Projetos Mecânicos / Especialidade: Vibração e acústica. Setores de atividade: Indústrias de Transformação.

Graduação em Tecnologia em Projetos Mecânicos

2004 - 2008

faculdade de tecnologia de sao paulo

Formação complementar

2025 - 2025

Extensão universitária em Introduction to Structural Health Monitoring. , Universidade Lusófona do Porto, ULP, Portugal.

2025 - 2025

Wind Energy. (Carga horária: 34h). , Technical University of Denmark, DTU, Dinamarca.

2024 - 2025

Google Project Management. (Carga horária: 120h). , Google Inc., Google, Estados Unidos.

2004 - 2004

Projeto de moldes plásticos. (Carga horária: 140h). , Protec, PROTEC, Brasil.

2002 - 2003

Mecatrônica. , Escola SENAI "Roberto Simonsen", senai101, Brasil.

2002 - 2002

Desenho Técnico Mecânico. (Carga horária: 600h). , SENAI - Departamento Regional de São Paulo, SENAI/DR/SP, Brasil.

Idiomas

Bandeira representando o idioma Inglês

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Bandeira representando o idioma Português

Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.

Bandeira representando o idioma Francês

Compreende Razoavelmente, Fala Pouco, Lê Razoavelmente, Escreve Pouco.

Áreas de atuação

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Projetos Mecânicos/Especialidade: Vibração e acústica.

Grande área: Ciências Exatas e da Terra / Área: Matemática / Subárea: Geometria e Topologia/Especialidade: Sistemas Dinâmicos.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos/Especialidade: Quantificação de incertezas.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Mecânica dos Sólidos.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Projetos de Máquinas.

Grande área: Engenharias / Área: Engenharia Mecânica / Subárea: Projetos Mecânicos.

Organização de eventos

SOUZA, A. P. ; FABRO, A. T. ; Machado, Marcela Rodrigues . XIX International Symposium on Dynamic Problems of Mechanics. 2023. (Congresso).

MACHADO, M. R. . Uncertainties 2012. 2012. (Congresso).

Participação em eventos

International Symposium on Uncertainty Quantification and Stochastic Modeling.Damage characterization in structures with random properties. 2014. (Simpósio).

Innowave 2012. Stochastic analysis of wave propagation in a cracked rod via spectral element and polynomial chaos expantion. 2012. (Congresso).

Uncertainties 2012. Wave propagation in a cracked beam spectral element including parameters uncertainties. 2012. (Congresso).

VII Congresso Nacional de Engenharia Mecânica. -. 2012. (Congresso).

VII Congresso Nacional de Engenharia Mecânica. DETECÇÃO DE DANO E ANÁLISE ESTOCÁSTICA DE UMA VIGA TRINCADA UTILIZANDO O MÉTODO DO ELEMENTO ESPECTRAL. 2012. (Congresso).

21st International Congress of Mechanical Engineering. Reliability analysis for probabilistic fatigue crack growth. 2011. (Congresso).

International Congress on Sound & Vibration. Reliability analysis using simple models aiming at a comparison among stochastic methods. 2011. (Congresso).

Seminário sobre Qualificação de Incertezas e Modelagem Estocástica.Seminário sobre Qualificação de Incertezas e Modelagem Estocástica. 2010. (Seminário).

Participação em bancas

Aluno: Lucas Simon Araújo

CUNHA JUNIOR, A.; COLOMBO, F. T.;R. MACHADO, MARCELA. DYNAMIC MODE DECOMPOSITION FOR DATA-DRIVEN MODELING OF SPATIO-TEMPORAL DYNAMICS. 2024 - Unesp - Campus Ilha Solteira.

Aluno: Luiza Freire Cesar de Sousa

CASTELLO, D. A.;MACHADO, M. R.; ROCHINHA, F. A.. BAYESIAN INFERENCE AND MODEL SELECTION FOR THE CHARACTERIZATION OF SPATIALLY VARYING STIFFNESS. 2022. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Rio de Janeiro.

Aluno: Vinícius Vaguetti Costa

FRANZINI, G. R.; FUJARRA, A. L. C.;MACHADO, M.R.. Uma discussão sobre identificação de danos em tubos parametricamente excitados. 2021. Dissertação (Mestrado em Engenharia Civil (Engenharia de Estruturas)) - Universidade de São Paulo.

Aluno: José Gilberto Picoral Filho

GOMES, H. M.; LISBOA, E. S.;MACHADO, M.R.; CASAS, W. J. P.. ESTUDO NUMÉRICO EXPERIMENTAL DA DINÂMICA DE CAMINHÕES E AVALIAÇÃO RELATIVA À VIBRAÇÃO DE CORPO INTEIRO PARA PROPOSIÇÂO DE OTIMIZAÇÃO. 2021. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Rio Grande do Sul.

Aluno: Guilherme Teixeira Semedo de Sousa

ALMEIDA, R. A. S. B.;MACHADO, M.R.; SILVA, T. A. N.. Estudo da Utilização de Emissões Acústicas para a Deteção de Dano. 2021. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Nova de Lisboa.

Aluno: Raphael Ugolini Santana

MORAIS, M. V. G.;MACHADO, M.R.; RIBEIRO, P. M. V.. ESTUDO NUMERICO-EXPERIMENTAL DO PÊNDULO QUADRIFILAR PARA DETERMINACAO DO TENSOR DE INERCIA: APLICAÇÃO EM MOCKUP DE NANOSATELITE CUBESAT. 2021. Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília.

Aluno: Rangel Silva Maia

SOUZA, A. P.; FABRO, A. T.;R. MACHADO, MARCELA. Otimizacao da posicao de um ADV em linhas aereas de transmissao de energia eletrica. 2018. Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília.

Aluno: Guilherme Pereira dos Reis

SOUZA, A. P.; FABRO, A. T.;MACHADO, M.R.. Investigação de modos de vibrações não-lineares em estruturas mecânicas. 2018. Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília.

Aluno: Pedro Luiz Bernardes Juni

AVILA, S. M.; MORAIS, M. V. G.;MACHADO, M.R.. Amortecedor tipo pêndulo invertido para controle de vibrações em edifícios altos. 2018. Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília.

Aluno: Eduardo Akira Pinheiro Uema

FABRO, A. T.;MACHADO, M. R.; SOUZA, A. P.. Análise dos efeitos determinísticos e aleatórios do vento na resposta dinâmica de uma transmissão eletromecânica. 2017. Dissertação (Mestrado em Engenharia Mecânica) - Universidade de Brasília.

Aluno: Mansour Hassan Alkmim

FABRO, A. T.; MORAIS, M. V. G.;MACHADO, M.R.. ANÁLISE DE UM AMORTECEDOR DE COLUNA DE LÍQUIDO SINTONIZADO EM UMA TURBINA EÓLICA SUJEITA A CARREGAMENTO ALEATÓRIO. 2017. Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília.

Aluno: Luccas Pereira Miguel

SILVA, S.; SCUSSEL, O.; VAROTO, P. S.;R. MACHADO, MARCELA; SHIKI, S. B.. STRUCTURAL HEALTH MONITORING FOR LOOSENING DETECTION IN BOLTED JOINTS. 2025. Tese (Doutorado em Engenharia Mecânica) - Unesp - Campus Ilha Solteira.

Aluno: Patricia Sanchez Reyes

PAGNACCO, E.; SAMPAIO, R.; JACQUELIN, E.;R. MACHADO, MARCELA; ACOSTA-HUMANEZ, P.. Design of mechanical systems with non-linear vibration absorbers in the presence of uncertainties. 2024. Tese (Doutorado em Genie Mecanique, Productique, Transport et Ginie Civ) - Institut National des Sciences Appliquées de Rouen.

Aluno: João Angelo Ferres Brogin

BUENO, D. D.;R. MACHADO, MARCELA; LEITE, S. N. C.; SUYAMA, R.; PEREIRA, J. A.. A CONTRIBUTION TO THE DYNAMICS OF EPILEPSY: IDENTIFICATION AND CONTROL FOR SEIZURE ATTENUATION. 2023. Tese (Doutorado em Engenharia Mecânica) - Unesp - Campus Ilha Solteira.

Aluno: LAÍS BITTENCOURT VISNADI

DANIEL, G. B.;SANTOS, J. M. C.; CAVALINI JUNIOR, A. A.;MACHADO, M. R.. Efeito de trinca em engrenagens de dente reto na resposta dinâmica do rotor. 2022. Tese (Doutorado em Doutorado em Engenharia Mecânica) - Universidade Estadual de Campinas.

Aluno: Bruna Silveira Pavlack

FIGUEIREDO, E. J. F.; CURY, A. A.;MACHADO, M. R.; ROITMAN, N.. Damage quantification using Polynomial Chaos-Kriging. 2022. Tese (Doutorado em Engenharia Mecanica) - Universidade Estadual Paulista Júlio de Mesquita Filho.

Aluno: Nathaly Sarasty Narvaez

EVANGELISTA JUNIOR, F.; SILVA, S. B. A.; PARENTE JUNIOR, E.;R. MACHADO, MARCELA. RELIABILITY OF SHEAR STRENGTHENED BEAMS WITH FRP AND CONTRIBUTIONS TO RELIABILITY-BASED DESIGN OPTIMIZATION. 2022. Tese (Doutorado em Estruturas e Construção Civil) - Universidade de Brasília.

Aluno: EUGÊNIA CORNILS MONTEIRO DA SILVA

BRASIL JUNIOR, A. C. P.; COSTA, M. L. M.; SILVA, S. M. E.;MACHADO, M.R.. Transferência de calor por convecção natural e mista em sistemas fotovoltaicos : estudo do comportamento térmico e desempenho do sistema. 2020. Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília.

Aluno: Álvaro Campos Ferreira

ALBUQUERQUE, E. L.; MORAIS, M. V. G.; RIBEIRO, G. O.; SOLLERO, P.;MACHADO, M.R.. Parallel H-Matrices accelerated isogeometric boundary element method implementation applied to acoustics internal and external problems. 2020. Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília.

Aluno: João Paulo Silva Lima

EVANGELISTA JUNIOR, F.;Machado, Marcela Rodrigues; REAL, M.; RORIZ JUNIOR, M. P.. A NOVEL HYPERPARAMETER-OPTIMIZED BI-FIDELITY MULTI-TASK DEEP NEURAL NETWORK USING BAYESIAN OPTIMIZATION FOR STRUCTURAL RELIABILITY ASSESSMENT. 2023. Exame de qualificação (Doutorando em Estruturas e Construção Civil) - Universidade de Brasília.

Aluno: Rodolfo Santos da Conceição

EVANGELISTA JUNIOR, F.;R. MACHADO, MARCELA; GOMES, W. J. S.. ANÁLISE DE CONFIABILIDADE E QUANTIFICAÇÃO DE INCERTEZAS EM SISTEMAS DINÂMICOS ATRAVÉS DE MODELOS SUBSTITUTOS MULTIFIDELIDADE. 2023. Exame de qualificação (Doutorando em Estruturas e Construção Civil) - Universidade de Brasília.

Aluno: Braion Barbosa de Moura

R. MACHADO, MARCELA; FABRO, ADRIANO; ROSA, S. S. R. F.; GONCALVES, P. J. P.. Controle de Tremores Humanos por Metaestruturas Inteligentes. 2023. Exame de qualificação (Doutorando em Ciências Mecânicas) - Universidade de Brasília.

Aluno: João Angelo Ferres Brogin

BUENO, D. D.; PEREIRA, J. A.;MACHADO, M.R.. A CONTRIBUTION TO THE DYNAMICS OF EPILEPSY: IDENTIFICATION AND CONTROL FOR SEIZURE ATTENUATION. 2023 - Unesp - Campus Ilha Solteira.

Aluno: Jefferson da Silva Coelho

R. MACHADO, MARCELA; TELOLI, R.; SILVA, S.; ALBUQUERQUE, E. L.. MONITORAMENTO DA INTEGRIDADE ESTRUTURAL DE PRENDEDORES DE ESTRUTURAS E AEROGERADORES UTILIZANDO DE APRENDIZADO DE MÁQUINA. 2023. Exame de qualificação (Doutorando em Ciências Mecânicas) - Universidade de Brasília.

Aluno: Bruna Silveira Pavlack

SILVA, S.; CUNHA JUNIOR, A.;MACHADO, M.R.; ROITMAN, N.. DAMAGE QUANTIFICATION USING POLYNOMIAL CHAOS-KRIGING. 2021. Exame de qualificação (Doutorando em Engenharia Mecânica) - Universidade Estadual Paulista Júlio de Mesquita Filho.

Aluno: Flaianny Bastos Pacheco

SANTOS, J. M. C.; BERTOLI, S. R.;MACHADO, M.R.. Propagação de Ondas em um Duto Acústico com Tubos em Ramificação Lateral Periódicos. 2021. Exame de qualificação (Mestrando em Engenharia Mecânica) - Universidade Estadual de Campinas.

Orientou

Arthur Henrique Salgado Leite Menezes

Projeto de metamaterial bio-inspirado programável para atenuação de tremores em sistemas biomecânicos; Início: 2025; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, Fundação de Apoio à Pesquisa do Distrito Federal; (Orientador);

CARLOS EDUARDO PEREIRA DA SILVA

Smart lattice metamaterials for vibration control of dynamic systems; Início: 2024; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, Fundação de Apoio à Pesquisa do Distrito Federal; (Orientador);

Mohammadreza Sahaf

Structural Health Monitoring of Wind Turbines with Transformer-Autoencoder Deep Learning; Início: 2025; Tese (Doutorado em Faculty of Civil and Environmental Engineering and Architecture) - Bydgoszcz University of Science and Technology, Narodowe Centrum Nauki; (Orientador);

Amanda Aryda Silva Rodrigues de Sousa

Transfer learning strucutral monitoring of offshower wind turbine; Início: 2023; Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília, Conselho Nacional de Desenvolvimento Científico e Tecnológico; (Orientador);

Vitória Carolina Duarte

Digital twin driven prognostics and health monitoring; Início: 2022; Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília; (Orientador);

Braion Brabosa de Moura

Dispositivo inteligente para atenuação de vibração e distúrbios do movimento; Início: 2021; Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília; (Orientador);

Jefferson da Silva Coelho

Reconhecimento de padrões e machine learning para identificação de danos em prendedores estruturais; Início: 2021; Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília; (Orientador);

CARLOS EDUARDO PEREIRA DA SILVA

Metamaterial bio-inspired programáveis para controle de vibração de sistemas; 2024; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, Fundação de Apoio à Pesquisa do Distrito Federal; Orientador: Marcela Rodrigues Machado;

Matheus Canedo

MODELOS ESPECTRAIS DE ESTRUTURAS HONEYCOMB ACOPLADAS A PIEZOELÉTRICOS COM CIRCUITO SHUNT PARA CONTROLE E ATENUAÇÃO DE VIBRAÇÕES; 2023; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Amanda Aryda

Monitoramento Da Integridade Estrutural de Vigas Utilizando Técnicas de Aprendizado de Máquina; 2023; Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Marcela Rodrigues Machado;

Tomé Seichi da Nóbrega Guenka

Investigação da absorção acústica de monólitos de Al2O3/MgO produzidos via freeze-casting; 2023; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Marcela Rodrigues Machado;

Vitória Carolina Duarte

Estimação de parâmetros de sistemas dinâmicos contínuos usando Inferência Bayesiana; 2022; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Braion Brabosa de Moura

Spectral models of beams coupled to piezoelectric shunt for attenuation of vibration and elastic waves; 2021; Dissertação (Mestrado em Ciências Mecânicas) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Yanne Marcela Soares Fernandes

MODELAGEM DINÂMICA DE LINHA DE TRANSMISSÃO AÉREA UTILIZANDO MÉTODO DO ELEMENTO ESPECTRAL; 2020; Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Marcela Rodrigues Machado;

Vinícius Mendes de Souza

ANÁLISE DINÂMICA DE CABOS DE PONTES ESTAIADAS CONSIDERANDO ALEATORIEDADE NA CONDIÇÃO DE CONTORNO E NA EXCITAÇÃO; 2020; Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Thiago Pereira e Silva

DEFORMAÇÃO DINÂMICA DE UMA VIGA DE EULER-BERNOULLI USANDO MÉTODO DO ELEMENTO ESPECTRAL; ; 2019; Dissertação (Mestrado em Integridade de Materiais da Engenharia) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Laís Costa e Castro

INVESTIGAÇÃO ANALÍTICO-NUMÉRICA EM MODELO DE TORRE EÓLICA COM ACOPLAMENTO ENTRE ROTOR E ELEMENTOS ESTRUTURAIS SOB EFEITO DE CARGAS AXIAIS; 2018; Dissertação (Mestrado em Engenharia Mecânica) - Universidade de Brasília, ; Orientador: Marcela Rodrigues Machado;

Gino Bertollucci Colherinhas

Design of an optimal pendulum-tuned mass damper applied to offshore wind turbines; 2020; Tese (Doutorado em Ciências Mecânicas) - Universidade de Brasília, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Marcela Rodrigues Machado;

Gabriel Guimarães de Souza Braga de Albuquerque

Inverse Design of Dynamic Device for Parkinson Tremor in Human Limbs Using Deep Learning; 2025; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília, Fundação de Apoio à Pesquisa do Distrito Federal; Orientador: Marcela Rodrigues Machado;

Gabriel Guimarães de Souza Braga de Albuquerque

Inverse Design of Dynamic Device for Parkinson Tremor in Human Limbs Using Deep Learning; 2024; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

CARLOS EDUARDO PEREIRA DA SILVA

CONTROLE DE VIBRAÇÃO DE SISTEMAS POR METAMATERIAL INTELIGENTE: ABORDAGEM PELO MÉTODO DOS ELEMENTOS FINITOS; 2023; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Akane Makende Santos

ANÁLISE NUMÉRICA DE ABSORVEDORES DINÂMICOS ADAPTADOS ÀS VIBRAÇÕES DE UM BRAÇO HUMANO COM DOENÇA DE PARKINSON; 2023; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

João Paulo de Moura Silva

ANÁLISE E ATENUAÇÃO DE VIBRAÇÃO EM CABOS DE LINHA DE TRANSMISSÃO; 2022; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

DANIEL FARIA BONFIM

ANÁLISE DE METAMATERIAL APLICADO AO CONTROLE VIBRACIONAL EM MEMBROS HUMANOS; 2022; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Alex Silva da Purificação e Lucas Martins Ricardi

ANÁLISE CINEMÁTICA E DINÂMICA DE UMA TRANSMISSÃO CONTINUAMENTE VARIÁVEL; 2021; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Tomé Seichi da Nóbrega Guenka

MONITORAMENTO ESTRUTURAL DE MECANISMO DE COMPRESSOR ATRAVÉS DE RESPOSTA DINÂMICA; 2020; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Victor Emmanuel Liete Gasparetto

Analise dinâmica estrutural de asa de aeronave protótipo para competição SAE Brasil Aerodesing; 2019; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Lucas Silva Barreto

Detecção e quantificação de dano em vigas utilizando propagação de ondas; 2019; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Gustavo Taffarel Oliveira Freire

ESTIMAÇÃO DE PARÂMETROS DE UM SISTEMA DINÂMICO COM O USO DA INFERÊNCIA BAYESIANA; 2019; Trabalho de Conclusão de Curso; (Graduação em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Gabriel Guimarães de Souza Braga de Albuquerque

Modelagem dinâmica e projeto de absorvedores dinâmico para o controle de distúrbios do movimento derivados de tremores patológicos; 2023; Iniciação Científica; (Graduando em Engenharia Mecânica) - Universidade de Brasília, Fundação de Apoio à Pesquisa do Distrito Federal; Orientador: Marcela Rodrigues Machado;

Léo Diniz Czarnewski

Modelagem e simulação numérica via elementos finitos do respirador VESTA para estudo de ergonomia do produto; 2021; Iniciação Científica; (Graduando em Engenharia Mecânica) - Universidade de Brasília, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Marcela Rodrigues Machado;

Caio César Abreu Bílio

Modelagem CAD do respirador VESTA e simulação numérica para análise da resistência; 2021; Iniciação Científica; (Graduando em Engenharia Mecânica) - Universidade de Brasília, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Marcela Rodrigues Machado;

Matheus Filippe Santos Alves

Modelagem CAD e simulação numérica do respirador N95 classe PFF2 com nanofilme de quitosana - VESTA; 2021; Iniciação Científica; (Graduando em Engenharia Mecânica) - Universidade de Brasília, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Marcela Rodrigues Machado;

Michel Luis Duwe

ESTUDO DE UM CASO EXPERIMENTAL DE PROPAGAÇÃO DE ONDAS EM UM VIGA ATRAVÉS DE SENSORES PIEZOELÉTRICOS WAFER ACTIVE (PWAS); 2018; Iniciação Científica; (Graduando em Engenharia Mecatrônica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Tomé Seichi

DETECÇÃO DE DANO VIA MÉTODO DO ÍNDICE DE DANO UTILIZANDO FUNÇÃO DE RESPOSTA EM FREQUÊNCIA; 2018; Iniciação Científica; (Graduando em Engenharia Mecânica) - Universidade de Brasília; Orientador: Marcela Rodrigues Machado;

Produções bibliográficas

  • MACHADO, M.R. ; DUTKIEWICZ, M. . Enhancing vibration attenuation in offshore wind turbine with multiphysics mechanical metamaterial. ENERGY REPORTS , v. 13, p. 1780-1801, 2025.

  • DE SOUSA, AMANDA A.S.R. ; MACHADO, MARCELA R. . Experimental vibration dataset collected of a beam reinforced with masses under different health conditions. DATA IN BRIEF , v. 1, p. 110043, 2024.

  • MACHADO, M.R. ; DUTKIEWICZ, M. ; COLHERINHAS, G.B. . Metamaterial-based vibration control for offshore wind turbines operating under multiple hazard excitation forces. RENEWABLE ENERGY , v. 223, p. 120056, 2024.

  • MACHADO, M. R. ; DUTKIEWICZ, M. . Enhancing broadband vibration suppression of a cable conductor using graded metamaterials. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 46, p. 190, 2024.

  • COELHO, JEFFERSON DA SILVA ; Machado, Marcela Rodrigues ; DE SOUSA, AMANDA ARYDA S.R. . PyMLDA: A Python open-source code for Machine Learning Damage Assessment. Software Impacts , v. 19, p. 100628, 2024.

  • DA N. GUENKA, T.S. ; MACHADO, M.R. ; SILVA, A.M.A. ; NUNES, M.A.A. . Freeze-cast porous Al2O3/MgO ceramics as potential acoustic sound absorption. APPLIED ACOUSTICS , v. 220, p. 109964, 2024.

  • MACHADO, M.R. ; DUTKIEWICZ, M. . Wind turbine vibration management: An integrated analysis of existing solutions, products, and Open-source developments. ENERGY REPORTS , v. 11, p. 3756-3791, 2024.

  • CASTELLO, DANIEL ALVES ; DE SOUSA, LUIZA FREIRE CESAR ; DA SILVA, GABRIEL LUCAS SOUSA ; Machado, Marcela Rodrigues . Bayesian model selection for structural damage identification: comparative analysis of marginal likelihood estimators. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 46, p. 492, 2024.

  • COELHO, JEFFERSON S. ; MACHADO, MARCELA R. ; DUTKIEWICZ, MACIEJ ; O. TELOLI, RAFAEL . Data-driven machine learning for pattern recognition and detection of loosening torque in bolted joints. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 46, p. 75, 2024.

  • SOUSA, A. A. S. R. ; COELHO, J. S. ; MACHADO, M.R. ; DUTKIEWICZ, M. . Multiclass Supervised Machine Learning Algorithms Applied to Damage and Assessment Using Beam Dynamic Response. Journal of Vibration Engineering & Technologies , p. 1-20, 2023.

  • DE MOURA, B.B. ; MACHADO, M.R. ; DEY, S. ; MUKHOPADHYAY, T. . Manipulating flexural waves to enhance the broadband vibration mitigation through inducing programmed disorder on smart rainbow metamaterials. APPLIED MATHEMATICAL MODELLING , v. 1, p. 1, 2023.

  • MOURA, B. B. ; MACHADO, MARCELA R. ; MUKHOPADHYAY, T. ; DEY, S. . Dynamic and wave propagation analysis of periodic smart beams coupled with resonant shunt circuits: passive property modulation. European Physical Journal-Special Topics , p. 1-17, 2022.

  • COLHERINHAS, G. B. ; MORAIS, M. V. G. ; MACHADO, MARCELA R. . Spectral Model of Offshore Wind Turbines and Vibration Control by Pendulum Tuned Mass Dampers. International Journal of Structural Stability and Dynamics , p. 1-18, 2022.

  • DALLALI, MANEL ; KHALIJ, LEILA ; CONFORTO, EGLE ; DASHTI, ALIREZA ; GAUTRELET, CHRISTOPHE ; RODRIGUES MACHADO, MARCELA ; SOUZA DE CURSI, EDUARDO . Effect of geometric size deviation induced by machining on the vibration fatigue behavior of Ti-6Al-4V. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , v. 1, p. 1-18, 2022.

  • MACHADO, MARCELA ; MOURA, B.B ; DEY, S. ; MUKHOPADHYAY, TANMOY . Bandgap manipulation of single and multi-frequency smart metastructures with random impedance disorder. Smart Materials and Structures , v. 1, p. 1, 2022.

  • SOARES FERNANDES, YANNE MARCELA ; RODRIGUES MACHADO, MARCELA ; DUTKIEWICZ, MACIEJ . The Spectral Approach of Love and Mindlin-Herrmann Theory in the Dynamical Simulations of the Tower-Cable Interactions under the Wind and Rain Loads. Energies , v. 15, p. 7725, 2022.

  • SANTOS, J. C. ; MORAIS, M. V. G. ; MACHADO, M. R. ; SILVA, R. S. Y. R. C. ; PALECHOR, E. U. L. ; DA SILVA, WELINGTON V. . Beam-like damage detection methodology using wavelet damage ratio and additional roving mass. FRATTURA E INTEGRITA STRUTTURALE , v. 16, p. 349-363, 2022.

  • BARRETO, L. S. ; MACHADO, M. R. ; SANTOS, J. C. ; MOURA, B. B. ; KHALIJ, L. . Damage indices evaluation for one-dimensional guided wave-based structural health monitoring. Latin American Journal of Solids and Structures , v. 1, p. 1-10, 2021.

  • MACHADO, M.R. ; DOS SANTOS, J.M.C. . Effect and identification of parametric distributed uncertainties in longitudinal wave propagation. APPLIED MATHEMATICAL MODELLING , v. 1, p. 10.1016/j.apm.2, 2021.

  • MACHADO, M.R. ; DUTKIEWICZ, M. ; MATT, C.F.T. ; CASTELLO, D.A. . Spectral model and experimental validation of hysteretic and aerodynamic damping in dynamic analysis of overhead transmission conductor. MECHANICAL SYSTEMS AND SIGNAL PROCESSING , v. 136, p. 106483, 2020.

  • MACHADO, MARCELA ; FABRO, ADRIANO ; MOURA, BRAION . Spectral Element for Flexural Waves Control in Smart Material Beams with Single and Multiple Resonant Impedance Shunt Circuit. Journal of Computational and Nonlinear Dynamics , v. 1, p. 10.1115/1.4047389, 2020.

  • GASPARETTO, V. E. L. ; MACHADO, M. R. ; CARNEIRO, S. H. S. . Experimental modal analysis of an aircraft wing prototype for SAE Aerodesign Competition. DYNA (MEDELLÍN) , v. 87, p. 100-110, 2020.

  • FERREIRA, A. C. ; COLHERINHAS, G. B. ; ALBUQUERQUE, E. L. ; MACHADO, M.R. ; MORAIS, M. V. G. . $${mathscr {H}}$$-matrix acoustics BEM for vocal tract configuration optimization using genetic algorithms. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 42, p. 1-11, 2020.

  • FREIRE, G. T. O. ; DUARTE, V. C. S. ; MACHADO, M. R. . Numerical identification of a linear oscillator stiffness using Bayesian inference and Markov chain Monte Carlo. REVISTA INTERDISCIPLINAR DE PESQUISA EM ENGENHARIA , v. 1, p. 1, 2020.

  • SILVA, G. ; MACHADO, M. R. ; DUTKIEWICZ, M. ; DOS SANTOS, J. M. C . Numerical analysis of wave propagation and vibration of overhead transmission cable. REVISTA INTERDISCIPLINAR DE PESQUISA EM ENGENHARIA , v. 1, p. 1, 2020.

  • GAUTRELET, CHRISTOPHE ; KHALIJ, LEILA ; Machado, Marcela Rodrigues . Resonance track-and-dwell testing for crack length measurement on 304L stainless steel. Mechanics & Industry , v. 21, p. 617, 2020.

  • MACHADO, M. R. ; KHALIJ, L. ; FABRO, A. T. . Dynamic Analysis of a Composite Structure under Random Excitation Based on the Spectral Element Method. INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION , v. 1, p. 1-12, 2019.

  • DUTKIEWICZ, MACIEJ ; MACHADO, MARCELA R. . Spectral Approach in Vibrations of Overhead Transmission Lines. IOP Conference Series: Materials Science and Engineering , v. 471, p. 052029, 2019.

  • DUTKIEWICZ, MACIEJ ; MACHADO, MARCELA R. . Dynamic Response of Overhead Transmission Line in Turbulent Wind Flow with Application of the Spectral Element Method. IOP Conference Series: Materials Science and Engineering , v. 471, p. 052031, 2019.

  • MACHADO, M. R. ; APPERT, A. ; KHALIJ, L. . Spectral formulated modelling of an electrodynamic shaker. MECHANICS RESEARCH COMMUNICATIONS , p. 1, 2019.

  • DUTKIEWICZ, M. ; MACHADO, M. R. . Spectral element method in the analysis of vibrations of overhead transmission line in damping environment. STRUCTURAL ENGINEERING AND MECHANICS , v. 71, p. 291-303, 2019.

  • DUTKIEWICZ, MACIEJ ; R. MACHADO, MARCELA . Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines. SOUND AND VIBRATION , v. 53, p. 161-175, 2019.

  • MACHADO, M. R. ; ADHIKARI, S. ; SANTOS, J. M. C. ; ARRUDA, J. R. F. . Estimation of beam material random field properties via sensitivity-based model updating using experimental frequency response functions. MECHANICAL SYSTEMS AND SIGNAL PROCESSING , v. 102, p. 180-197, 2018.

  • MACHADO, M. R. ; ADHIKARI, S. ; DOS SANTOS, J. M. C. . Spectral element-based method for aone-dimensional damaged structure with distributed random properties. Journal of the Brazilian Society of Mechanical Sciences and Engineering , v. 40, p. 415, 2018.

  • MACHADO, M. R. ; ADHIKARI, S. ; SANTOS, J. M. C. . A spectral approach for damage quantification in stochastic dynamic systems. MECHANICAL SYSTEMS AND SIGNAL PROCESSING , v. 88, p. 253-273, 2017.

  • MACHADO, M. R. ; V.S. Pereira ; D.I. G. Costa ; SANTOS, J. M. C. . DYNAMICS ANALYSIS OF 1D STRUCTURE INCLUDING RANDOM PARAMETER VIA FREQUENCY-DOMAIN STATE-VECTOR EQUATIONS. Revista Interdisciplinar de Pesquisa em Engenharia-RIPE , v. 2, p. 130-143, 2017.

  • MORAES, Elson César ; MACHADO, M. R. ; PEREIRA, Vilson Souza ; COSTA, D. I. G. ; DOS SANTOS, J. M. C . Analysis of acoustic waveguide through the energy spectral element method including parameters uncertainty. REVISTA INTERDISCIPLINAR DE PESQUISA EM ENGENHARIA , v. 2, p. 116-129, 2017.

  • MACHADO, M. R. ; DOS SANTOS, J. M. C. . Reliability Analysis of Damaged Beam Spectral Element with Parameter Uncertainties. Shock and Vibration , v. 2015, p. 1-12, 2015.

  • ALBUQUERQUE, G. G. S. B. ; R. MACHADO, MARCELA . Design of Passive Dynamic Absorbers to Attenuate Pathological Tremor of Human Upper Limb. Lecture Notes in Mechanical Engineering. 1ed.: Springer Nature Switzerland, 2025, v. , p. 271-285.

  • MACHADO, MARCELA R. ; DUTKIEWICZ, MACIEJ . Three-Dimensional Model of Wind Turbine NREL-Monopile 5 MW for Vibration Characterisation. Springer Proceedings in Physics. 1ed.: Springer Nature Switzerland, 2024, v. 302, p. 29-37.

  • DUTKIEWICZ, MACIEJ ; MACHADO, MARCELA R. ; da Silva Coelho, Jefferson . Application of Spectral Element Method and Machine Learning Technique in the Composite Concrete Beam Damage Prediction. Springer Proceedings in Physics. 1ed.: Springer Nature Switzerland, 2024, v. 302, p. 69-78.

  • PAIVA, G. O. ; QUEIROZ, M. ; MACHADO, MARCELA . Study of the Influence of Wood Mechanical Properties Variability on the Sound Synthesis of a Simplified String Instrument. In: Dimitrovová, Z., Biswas, P., Gonçalves, R., Silva, T.. (Org.). Recent Trends in Wave Mechanics and Vibrations. WMVC 2022. Mechanisms and Machine Science. 1ed.: Springer, 2023, v. 125, p. 890-899.

  • LOPES, I. ; MACHADO, M. R. . Modal Properties and Modal-Coupling in the Wind Turbines Vibrational Characteristics. In: Dimitrovová, Z., Biswas, P., Gonçalves, R., Silva, T.. (Org.). Recent Trends in Wave Mechanics and Vibrations. WMVC 2022. Mechanisms and Machine Science. 1ed.: Springer, 2023, v. 125, p. 259-266.

  • COELHO, J. S. ; SOUSA, A. A. S. R. ; MACHADO, M.R. ; DUTKIEWICZ, M. . Study of Machine Learning Techniques for Damage Identification in a Beam. In: Dimitrovová, Z., Biswas, P., Gonçalves, R., Silva, T.. (Org.). Recent Trends in Wave Mechanics and Vibrations. WMVC 2022. Mechanisms and Machine Science. 1ed.: , 2023, v. 125, p. 817-826.

  • MOURA, B. B. ; MACHADO, M.R. . Rainbow Smart Metamaterial to Improve Flexural Wave Isolation and Vibration Attenuation of a Beam. In: Dimitrovová, Z., Biswas, P., Gonçalves, R., Silva, T.. (Org.). Recent Trends in Wave Mechanics and Vibrations. WMVC 2022. Mechanisms and Machine Science. 1ed.: Springer, 2023, v. 125, p. 725-733.

  • Machado, Marcela Rodrigues ; MOURA, B. B. ; ALVES, M. F. S. ; BILIO, C. C. A. ; CZARNEWSKI, L. D. . Simulação das características mecânicas do respirador antiviral N95 ? Vesta. In: Leite, Cicilia Raquel Maia., Fernandes, Luciana Alves., Rosa, Mário Fabrício Fleury., Silva, Mayla dos Santos., Binsfeld, Pedro Canisio., Campos, Sebastião Junio Menezes., Rosa, Suélia de Siqueira R. F.. (Org.). Livro Ecossistema de pesquisa, desenvolvimento e inovação tecnológica em saúde. 1ed.: 3TS, 2022, v. 1, p. 1-28.

  • DUTKIEWICZ, M. ; MACHADO, M. R. . Spectral Approach of Reinforced Concrete Column Dynamics. In: Herisanu, N., Marinca, V.. (Org.). Acoustics and Vibration of Mechanical Structures ? AVMS-2021. Springer Proceedings in Physics,. 1ed.Switzerland: Springer Nature, 2022, v. 274, p. 308-318.

  • DUTKIEWICZ, M. ; MACHADO, M. R. . Vibration Characterisation of a Damaged Cable by the Spectral Element Method.. In: Herisanu, N., Marinca, V.. (Org.). Acoustics and Vibration of Mechanical Structures ? AVMS-2021. Springer Proceedings in Physics,. 1ed.Switzerland: Springer Nature, 2022, v. 274, p. 329-337.

  • DUTKIEWICZ, MACIEJ ; MACHADO, MARCELA R. . Spectral Element Analysis of Non-stationary Wind Acting on Overhead Transmission Line. Springer Proceedings in Physics. 1ed.: Springer International Publishing, 2021, v. 251, p. 463-471.

  • FERNANDES, Y. M. S. ; MACHADO, M. R. ; DUTKIEWICZ, MACIEJ . Structural Dynamic Response of Coupling Between Transmission Line and Tower Under Random Excitation. Perspectives in Dynamical Systems III: Control and Stability. DSTA 2019. Springer Proceedings in Mathematics & Statistics. 1ed.Alemanha: Springer International Publishing, 2021, v. 364, p. 143-159.

  • ROSA, M. F. F. ; CHAVES, G. L. ; ALVES, M. M. ; MACHADO, M.R. . PESQUISA TRANSLACIONAL EM SAÚDE PARA O ENFRENTAMENTO DO COVID-19: desenvolvimento e produção do respirador VESTA como equipamento de proteção individual. In: Aldira Guimarães Duarte; Carlos F. Domínguez Avila. (Org.). A COVID-19 NO BRASIL: ciência, inovação tecnológica e políticas públicas. 1ed.Curitiba: Editora CRV, 2020, v. 1, p. 1-.

  • Palechor, E. U. L. ; MACHADO, M. R. ; de Morais, M. V. G. ; BEZERRA, L. M. . Dynamic Analysis of a Beam with Additional Auxiliary Mass Spatial Via Spectral Element Method. Springer Proceedings in Mathematics & Statistics. 249ed.: Springer International Publishing, 2018, v. , p. 279-289.

  • Machado, Marcela Rodrigues ; Santos, Jose Maria Campos Dos . Damage Detection in an Energy Flow Model Including Parameter Uncertainty. Conference Proceedings of the Society for Experimental Mechanics Series. 7ed.New York: Springer New York, 2014, v. , p. 131-140.

  • SILVA, C. E. P. ; MACHADO, M.R. ; MUKHOPADHYAY, T. . Vibration control through a squared lattice with smart metamaterial. In: INTERNATIONAL SYMPOSIUM ON ENERGY HARVESTING DYNAMICS ? EHDS 2025, 2025, Lublin. INTERNATIONAL SYMPOSIUM ON ENERGY HARVESTING DYNAMICS, 2025.

  • MOURA, B. B. ; MACHADO, M.R. . Piezoelectric Metamaterials for Tremor Suppression and Energy Harvesting. In: INTERNATIONAL SYMPOSIUM ON ENERGY HARVESTING DYNAMICS ? EHDS 2025, 2025, Lublin. INTERNATIONAL SYMPOSIUM ON ENERGY HARVESTING DYNAMICS, 2025.

  • SOUSA, A. A. S. R. ; MACHADO, M. R. ; TELOLI, R. . Integration of Multiple Sensors and Machine Learning Techniques for Structural Health Monitoring in CFRP Composites. In: International Conference on Structural Engineering Dynamics, 2025, Lisbon. International Conference on Structural Engineering Dynamics (ICEDyn), 2025.

  • MACHADO, M.R. ; DUTKIEWICZ, MACIEJ . Inverse design of acoustic programmable metamaterial beams based using deep learning. In: 9th European Congress on Computational Methods in Applied Sciences and Engineering, 2024, Lisbon. 9th European Congress on Computational Methods in Applied Sciences and Engineering, 2024.

  • COELHO, J. S. ; MACHADO, M.R. ; DUTKIEWICZ, M. . Estimation of loosening torque in bolted joints from experimental data and regression models. In: International Conference on Recent Advances in Structural Dynamics (RASD), 2024, Southhampton. International Conference on Recent Advances in Structural Dynamics (RASD), 2024.

  • MACHADO, M.R. ; MUKHOPADHYAY, T. ; DUTKIEWICZ, M. . Wave propagation in honeycomb lattices applied in wind turbine blade. In: International Conference on Recent Advances in Structural Dynamics (RASD), 2024, Southhampton. International Conference on Recent Advances in Structural Dynamics (RASD), 2024.

  • SOUSA, A. A. S. R. ; MACHADO, M.R. ; TELOLI, R. . STRUCTURAL MONITORING OF COMPOSITE CFRP PLATE UNDER TEMPERATURE VARIATION USING THE MACHINE LEARNING-PYMLDA CODE. In: 7 th Brazilian Conference on Composite Materials, 2024, Brasilia. 7 th Brazilian Conference on Composite Materials, 2024. v. 1. p. 1.

  • MACHADO, M.R. ; DUTKIEWICZ, M. ; SANTOS, J. M. C. . Inverse design of acoustic metamaterial-based vibration control for offshore wind turbines. In: 53rd International Congress & Exposition on Noise Control Engineering, 2024, Nantes. 53rd International Congress & Exposition on Noise Control Engineering. Nantes: Internoise2024, 2024.

  • MOURA, B. B. ; R. MACHADO, MARCELA . Optmization of metastructure-based devices for for human tremor control. In: Encontrol Nacional de Engenharia Biomecânica, 2024, Gramado. Encontrol Nacional de Engenharia Biomecânica, 2024. v. 1. p. 1.

  • SILVA, C. E. P. ; R. MACHADO, MARCELA ; MUKHOPADHYAY, T. . Designed honeycomb lattice for improving vibration control. In: 53rd International Congress & Exposition on Noise Control Engineering, 2024, Nantes. 53rd International Congress & Exposition on Noise Control Engineering, 2024. v. 1. p. 1.

  • MOURA, B. B. ; R. MACHADO, MARCELA ; MUKHOPADHYAY, T. ; DEY, S. . Investigation of Synthetic Inductance for Resonant Shunt Circuit Applied to Vibration Control. In: IEEE 7th International Conference on Condition Assessment Techniques in Electrical Systems, 2024, Kolkata. 2024 IEEE 7th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), 2024. v. 1.

  • MOURA, B. B. ; R. MACHADO, MARCELA . Tremor control in the arm of a Parkinson?s disease patient using piezoelectric beam meta-structure. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • SOUSA, A. A. S. R. ; R. MACHADO, MARCELA ; DUTKIEWICZ, M. . Assessment of damage in a reinforced beam by k-nearest neighbor algorithm. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • DUARTE, V. C. S. ; R. MACHADO, MARCELA . Parameter estimation in bolted joints by Bayesian inference. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • COELHO, J. S. ; R. MACHADO, MARCELA ; DUTKIEWICZ, M. . Bolt loosening detection based in data-driven of bolted beam connections by support vector machine method. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • ALBUQUERQUE, G. G. S. B. ; MOURA, B. B. ; R. MACHADO, MARCELA . Comparison of passive dynamic absorbers in attenuating pathological tremor of human upper limb: an analytical approach. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • SILVA, C. E. P. ; R. MACHADO, MARCELA . Dynamic model of the human upper limb affected by Parkinson?s Disease: finite element approach. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • SEICHI, T. ; R. MACHADO, MARCELA ; SILVA, A. M. A. ; NUNES, M. A. A. . Acoustic characterization of porous ceramic produced via freeze-casting using DMSO as solvent. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • MACHADO, M.R. . Programmable metamaterials for human limb tremor suppression: advancements in attenuation and control. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • COELHO, J. S. ; R. MACHADO, MARCELA ; DUTKIEWICZ, M. . Torque loosening Detection in bolted joint Structure using Machine Learning Techniques. In: PCM CMM 2023 - 5th Polish Congress of Mechanics/ 25th International Conference on Computer Methods in Mechanics, 2023, Gliwice. PCM CMM 2023 - 5th Polish Congress of Mechanics/ 25th International Conference on Computer Methods in Mechanics, 2023.

  • SOUSA, A. A. S. R. ; R. MACHADO, MARCELA ; COELHO, J. S. ; DUTKIEWICZ, M. . Assessment of damage in a beam reinforced with masses using supervised learning algorithm. In: PCM CMM 2023 - 5th Polish Congress of Mechanics/ 25th International Conference on Computer Methods in Mechanics, 2023, Gliwice. PCM CMM 2023 - 5th Polish Congress of Mechanics/ 25th International Conference on Computer Methods in Mechanics, 2023.

  • ALBUQUERQUE, G. G. S. B. ; MACHADO, M.R. . Design of passive dynamic absorbers to attenuate pathological tremor of human upper limb. In: 27th COBEM ? International Congress of Mechanical Engineering, 2023, Florianópolis. 27th COBEM ? International Congress of Mechanical Engineering, 2023. v. 1. p. 1.

  • SOUSA, A. A. S. R. ; MACHADO, M.R. . A FRAMEWORK OF CANTILEVER BEAM FOR DAMAGE DETECTION USING ARTIFICIAL NEURAL NETWORKS. In: 27th COBEM ? International Congress of Mechanical Engineering, 2023, Florianópolis. 27th COBEM ? International Congress of Mechanical Engineering, 2023.

  • MOURA, B. B. ; MACHADO, MARCELA . Investigation of resonant shunt circuit connected piezoelectric path for low-frequency tuning. In: 27th COBEM ? International Congress of Mechanical Engineering, 2023, Florianópolis. 27th COBEM ? International Congress of Mechanical Engineering, 2023.

  • MACHADO, M.R. ; DUTKIEWICZ, M. . USING METAMATERIAL TO CONTROL OFFSHORE WIND TURBINE VIBRATIONS. In: XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023, Porto - Portugal. XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023.

  • SOUSA, A. A. S. R. ; MACHADO, M.R. . A HYBRID LEARNING MODEL FOR ASSESSMENT BEAM DAMAGE DETECTION. In: XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023, Porto - Portugal. XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023.

  • DUTKIEWICZ, M. ; MACHADO, M.R. ; COELHO, J. S. . SPECTRAL METHOD AND MACHINE LEARNING APPROACH TO WIND TURBINE DAMAGE DETECTION. In: XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023, Porto - Portugal. XLIV Ibero-Latin American Congress on Computational Methods in Engineering, 2023.

  • BORGES, M. C. R. ; MACHADO, M.R. ; MUKHOPADHYAY, T. ; DEY, S. . Spectral element for vibration analysis of a honeycomb plate. In: XIX International Symposium on Dynamic Problems of Mechanics, 2023, Pirenópolis. Proceedings of the XIX International Symposium on Dynamic Problems of Mechanics, 2023.

  • COELHO, J. S. ; SOUSA, A. A. S. R. ; Machado, Marcela Rodrigues ; DUTKIEWICZ, M. . STUDY OF MACHINE LEARNING TECHNIQUES FOR DAMAGE IDENTIFICATION IN A BEAM. In: The 10th international Conference on Wave Mechanics and Vibrations, 2022, Lisbon. The 10th international Conference on Wave Mechanics and Vibrations, 2022. v. 1. p. 1.

  • MOURA, B. B. ; Machado, Marcela Rodrigues . RAINBOW SMART METAMATERIAL TO IMPROVE FLEXURAL WAVE ISOLATION AND VIBRATION ATTENUATION OF A BEAM. In: The 10th international Conference on Wave Mechanics and Vibrations, 2022, Lisbon. The 10th international Conference on Wave Mechanics and Vibrations, 2022.

  • LOPES, I. ; Machado, Marcela Rodrigues . MODAL PROPERTIES AND MODE-COUPLING INSTABILITY IN THE WIND TURBINES VIBRATIONAL CHARACTERISTICS. In: The 10th international Conference on Wave Mechanics and Vibrations, 2022, Lisbon. The 10th international Conference on Wave Mechanics and Vibrations, 2022.

  • PAIVA, G. O. ; QUEIROZ, M. ; Machado, Marcela Rodrigues . STUDY OF THE INFLUENCE OF WOOD MECHANICAL PROPERTIES VARIABILITY ON THE SOUND SYNTHESIS OF A SIMPLIFIED STRING INSTRUMENT. In: The 10th international Conference on Wave Mechanics and Vibrations, 2022, Lisbon. The 10th international Conference on Wave Mechanics and Vibrations, 2022.

  • DUARTE, V. C. S. ; Machado, Marcela Rodrigues . Parameter Estimation of Continuous Dynamical Systems Using Bayesian Inference. In: 8th International Symposium on Solid Mechanics, 2022, Campinda. 8th International Symposium on Solid Mechanics, 2022.

  • SEICHI, T. ; Machado, Marcela Rodrigues ; SILVA, A. M. A. ; NUNES, M. A. A. . Investigação numérica da influência de diferentes parâmetros mecânicos sobre as propriedades acústicas de material cerâmico poroso. In: 12º Congresso Iberoamericano de Acústica, 2022, Florianopolis. 12º Congresso Iberoamericano de Acústica FIA SOBRAC, 2022.

  • SEICHI, T. ; Machado, Marcela Rodrigues ; SILVA, A. M. A. ; NUNES, M. A. A. . Acoustic characterization of ceramic Al2O3/MgO samples produced via unidirectional freeze-casting. In: International Conference on Noise and Vibration Engineering, 2022, Lueven. International Conference on Noise and Vibration Engineering, 2022.

  • MOURA, B. ; MACHADO, M. R. . VIBRATION CONTROL USING PIEZOELECTRIC CONNECTED WITH SHUNTS CIRCUITS. In: 14th World Congress in Computational Mechanics and ECCOMAS Congress - WCCM-ECCOMAS Congres, 2021, Paris. VIBRATION CONTROL USING PIEZOELECTRIC CONNECTED WITH SHUNTS CIRCUITS, 2021. v. 1.

  • ALVES, M. F. S. ; BILIO, C. C. A. ; CZARNEWSKI, L. D. ; MOURA, B. B. ; MACHADO, M.R. . Structural analysis of the nose clip from the antiviral filtering facepiece respirator N95 - VESTA. In: 26th International Congress of Mechanical Engineering, 2021, Florianópolis. 26th International Congress of Mechanical Engineering, 2021. v. 1.

  • COELHO, J. S. ; SOUSA, A. A. S. R. ; MACHADO, M.R. ; JORGE, A. B. . SPECTRAL MODEL AND VIBRATION ANALYSIS OF BEAMS CONNECTED BY BOLTS-JOINT. In: 26th International Congress of Mechanical Engineering, 2021, Florianópolis. 26th International Congress of Mechanical Engineering, 2021.

  • SOUSA, A. A. S. R. ; COELHO, J. S. ; MACHADO, M.R. ; JORGE, A. B. . VIBRATION CHARACTERIZATION OF BEAMS RIVETED LAP JOINT USING SPECTRAL ELEMENT METHOD. In: 26th International Congress of Mechanical Engineering, 2021, Florianópolis. 26th International Congress of Mechanical Engineering, 2021. v. 1.

  • MOURA, B. B. ; BORGES, M. C. R. ; MACHADO, M.R. . Smart beam coupled to piezoelectric resonant shunt vibration characterisation, control and bandgap generation. In: 26th International Congress of Mechanical Engineering, 2021, Florianópolis. 26th International Congress of Mechanical Engineering, 2021. v. 1.

  • BORGES, M. C. R. ; MOURA, B. B. ; MACHADO, M.R. . Design of tunable shunt rainbow trap smart beam for multi-frequency vibration attenuation. In: XLII Ibero-Latin-American Congress on Computational Methods in Engineering and III Pan-American Congress on Computational Mechanics, 2021, Rio de Janeiro. Proceedings of the joint XLII Ibero-Latin-American Congress on Computational Methods in Engineering and III Pan-American Congress on Computational Mechanics, ABMEC-IACM, 2021. v. 1.

  • BILIO, C. C. A. ; BORGES, M. C. R. ; CZARNEWSKI, L. D. ; MOURA, B. B. ; MACHADO, M.R. . Structural analysis of antiviral N95 filtering facepiece respirator VESTA. In: XLII Ibero-Latin-American Congress on Computational Methods in Engineering and III Pan-American Congress on Computational Mechanics, 2021, Rio de Janeiro. Proceedings of the joint XLII Ibero-Latin-American Congress on Computational Methods in Engineering and III Pan-American Congress on Computational Mechanics, ABMEC-IACM, 2021. v. 1.

  • SEICHI, T. ; MACHADO, MARCELA R. . Influence of a cracked rod in the dynamic of a planar slider-crank mechanism. In: 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Applications December 6-9, 2021, 2021, Lodz. 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Application, 2021.

  • MACHADO, MARCELA R. ; DUTKIEWICZ, M. . Spectral analysis of chimney vibrations. In: 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Applications December 6-9, 2021, 2021, Lodz. 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Application, 2021.

  • SANTOS, J. C. ; MACHADO, MARCELA R. ; VERNIERES-HASSIM, L. ; KHALIJ, L. . Vibration characterisation of a tubular chemical reactor. In: 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Applications December 6-9, 2021, 2021, Lodz. 16th INTERNATIONAL CONFERENCE Dynamical Systems Theory and Application, 2021.

  • MACHADO, M.R. ; MIRANDA JUNIOR, E. J. P. ; DOS SANTOS, J. M. C . Analysis of phononic crystals with uncertainty in the parameters using extended plane wave expansion. In: 49th International Congress and Exposition on Noise Control Engineering, 2020, Seoul. 49th International Congress and Exposition on Noise Control Engineering, 2020.

  • MOURA, B. ; BORGES, M. C. R. ; MACHADO, M.R. . Vibration and wave propagation control in a smart metamaterial beam with periodic arrays of shunted piezoelectric patches. In: 49th International Congress and Exposition on Noise Control Engineering, 2020, Seoul. 49th International Congress and Exposition on Noise Control Engineering, 2020.

  • SILVA, T. P. E. ; MACHADO, M. R. ; KHALIJ, L. . Dynamic strain analysis using spectral element method. In: DINAME 2019 XV- International Symposium on Dynamic Problems of Mechanics, 2019, Buzios. Dynamic strain analysis using spectral element method, 2019.

  • MACHADO, M. R. ; MIRANDA JUNIOR, E. J. P. ; DOS SANTOS, J. M. C . Analysis of 1D Phononic Crystals Rod with Uncertainty Parameters. In: 25th International Congress of Mechanical Engineering, 2019, Uberlandia. 25th International Congress of Mechanical Engineering, 2019.

  • SEICHI, T. ; MACHADO, M. R. ; KHALIJ, L. . Comparison of FRF-Based Damage Indexes for Cracked Beam. In: 25th International Congress of Mechanical Engineering, 2019, Uberlandia. 25th International Congress of Mechanical Engineering, 2019.

  • V. Sousa ; MACHADO, M. R. ; DUTKIEWICZ, M. . UNCERTAINTY MODELLING IN BOUNDARY CONDITION OF STRUCTURAL CABLE-STAYED BRIDGES. In: 25th International Congress of Mechanical Engineering, 2019, Uberlandia. 25th International Congress of Mechanical Engineering, 2019.

  • MOURA, B. ; MACHADO, M. R. . ANALYSIS OF VIBRATION ATTENUATION IN A BEAM COUPLED WITH A PIEZOELECTRIC IN SHUNT CONFIGURATION USING THE SPECTRAL ELEMENT METHOD. In: 25th International Congress of Mechanical Engineering, 2019, Uberlandia. 25th International Congress of Mechanical Engineering, 2019.

  • FERNANDES, Y. M. S. ; MACHADO, M. R. ; DUTKIEWICZ, M. ; E.D. Nobrega . VIBRATIONAL ANALYSIS OF POWER TRANSMISSION TOWER BY SPECTRAL ELEMENT METHOD: A NUMERICAL VALIDATION. In: 25th International Congress of Mechanical Engineering, 2019, Uberlandia. 25th International Congress of Mechanical Engineering, 2019.

  • DALLALI, M. ; GAUTRELET, C. ; KHALIJ, L. ; E. Conforto ; MACHADO, M. R. . Modal behaviorof Ti-6Al-4V specimen under high cycle fatigue.. In: Surveillance, Vishno and AVE conferences, 2019, Lyon. Surveillance, Vishno and AVE conferences, 2019.

  • MACHADO, M. R. ; FABRO, A. T. ; MOURA, B. . Flexural waves propagation in piezoelectric metamaterial beam. In: The International Conference 'Dynamical Systems ? Theory and Applications' (DSTA), 2019, Polonia. The International Conference "Dynamical Systems ? Theory and Applications" (DSTA), 2019.

  • FERNANDES, Y. M. S. ; MACHADO, M. R. ; DUTKIEWICZ, M. . Structural dynamic response of the coupling between transmission lines and tower under random excitation. In: The International Conference 'Dynamical Systems ? Theory and Applications' (DSTA), 2019, Polonia. The International Conference "Dynamical Systems ? Theory and Applications" (DSTA), 2019.

  • MACHADO, M. R. ; APPERT, A. ; KHALIJ, L. . Dynamic analysis of a fatigue specimen subjected to a random base excitation via spectral element method. In: ICVRAM ISUMA UNCERTAINTIES 2018, 2018, Florianopolis. ICVRAM ISUMA UNCERTAINTIES 2018, 2018.

  • DUTKIEWICZ, M. ; MACHADO, M. R. . Spectral approach in vibrations of overhead transmission lines. In: 3th International Symposium on World Multidisciplinary Civil Engineering, Architecture and Urban Planning, Web of Knowledge & Scopus, ISI Thomson Reuters, 2018, Prague. 3th International Symposium on World Multidisciplinary Civil Engineering, Architecture and Urban Planning, Web of Knowledge & Scopus, ISI Thomson Reuters, 2018.

  • DUTKIEWICZ, M. ; MACHADO, M. R. . Dynamical response of overhead transmission line in turbulent wind flow with application of the spectral element method. In: 3th International Symposium on World Multidisciplinary Civil Engineering, Architecture and Urban Planning, Web of Knowledge & Scopus, ISI Thomson Reuters, 2018, Prague. 3th International Symposium on World Multidisciplinary Civil Engineering, Architecture and Urban Planning, Web of Knowledge & Scopus, ISI Thomson Reuters, 2018.

  • SEICHI, T. ; MACHADO, M. R. . DETECÇÃO DE DANO VIA MÉTODO DO ÍNDICE DE DANO UTILIZANDO FUNÇÃO DE RESPOSTA EM FREQUÊNCIA. In: XXV Congresso Nacional de Estudantes de Engenharia Mecânica, 2018, Brasilia. XXV Congresso Nacional de Estudantes de Engenharia Mecânica, 2018.

  • DUWE, M. L. ; MACHADO, M. R. . ESTUDO DE UM CASO EXPERIMENTAL DE PROPAGAÇÃO DE ONDAS EM UM VIGA ATRAVÉS DE SENSORES PIEZOELÉTRICOS WAFER ACTIVE (PWAS). In: XXV Congresso Nacional de Estudantes de Engenharia Mecânica, 2018. XXV Congresso Nacional de Estudantes de Engenharia Mecânica, 2018.

  • KHALIJ, L. ; GAUTRELET, C. ; MACHADO, M. R. ; TROIAN, R. ; DALLALI, M. . FATIGUE LIFE PREDICTION BASED ON RESONANT FREQUENCY SHIFT. In: 2nd International Conference on Structural Integrity and Durability, 2018, Croatia. 2nd International Conference on Structural Integrity and Durability, 2018.

  • MACHADO, M. R. ; E.D. Nobrega ; SANTOS, J. M. C. . VIBRATION BAND GAPS IN A METAMATERIAL STRUCTURE WITH RANDOM PARAMETERS USING WAVE FINITE ELEMENT AND GENERALIZED POLYNOMIAL CHAOS. In: International Conference on Structural Engineering Dynamics ICEDyn 2017, 2017, Ericeira. International Conference on Structural Engineering Dynamics ICEDyn 2017, 2017.

  • MACHADO, M. R. ; FABRO, A. T. ; SILVA, T. A.N. . UNCERTAINTY ANALYSIS OF FUNCTIONALLY GRADED PLATES CONSIDERING SPATIALLY CORRELATED RANDOMNESS. In: International Conference on Structural Engineering Dynamics ICEDyn 2017, 2017, Ericeira. International Conference on Structural Engineering Dynamics ICEDyn 2017, 2017.

  • PALECHOR, U. L. ; MACHADO, M. R. ; MORAIS, M. V. G. ; BEZERRA, L. M. . Dynamic analysis of a beam with additional auxiliary mass spatial via spectral element method. In: International Conference Dynamical Systems ? Theory and ApplicationsDSTA-2017, 2017, Lodz. nternational Conference Dynamical Systems ? Theory and ApplicationsDSTA-2017, 2017.

  • MACHADO, M. R. ; KHALIJ, L. ; FABRO, A. T. . Spectral approach for dynamic analysis of a composite structure under random excitation. In: International Conference Dynamical Systems ? Theory and ApplicationsDSTA-2017, 2017, Lodz. International Conference Dynamical Systems ? Theory and Applications DSTA-2017, 2017.

  • MACHADO, M. R. ; ADHIKARI, S. ; SANTOS, J. M. C. ; ARRUDA, J. R. F. . Distributed parameter estimation of a stochastic beam structure via sensitivity-based model updating using experimental FRFs. In: 3rd International Symposium on Uncertainty Quantification and Stochastic Modeling, 2016, Maresias, SP, Brazil. Proceedings of the 3rd International Symposium on Uncertainty Quantification and Stochastic Modeling, 2016.

  • MACHADO, M. R. ; SANTOS, J. M. C. ; V.S. Pereira ; D.I. G. Costa ; E. C. Moraes . DYNAMICS ANALYSIS OF 1D STRUCTURE INCLUDING RANDOM PARAMETER VIA FREQUENCY-DOMAIN STATE-VECTOR EQUATIONS. In: XXXVII Iberian Latin-American Congress on Computational Methods in Engineering, 2016, Brasilia. Proceedings of the XXXVII Iberian Latin-American Congress on Computational Methods in Engineering, 2016.

  • E. C. Moraes ; MACHADO, M. R. ; V.S. Pereira ; SANTOS, J. M. C. . Analysis of acoustic waveguide through the energy spectral element method including parameters uncertainty. In: XXXVII Iberian Latin-American Congress on Computational Methods in Engineering, 2016, Brasilia. XXXVII Iberian Latin-American Congress on Computational Methods in Engineering, 2016.

  • E.D. Nobrega ; MACHADO, M. R. ; SANTOS, J. M. C. . Wave propagation in a beam-like structure with random parameter using wave finite element method. In: International Conference on Noise and Vibration Engineering ISMA, 2016, Lueven. International Conference on Noise and Vibration Engineering ISMA, 2016.

  • MACHADO, M. R. ; ADHIKARI, S. ; SANTOS, J. M. C. . DISTRIBUTED PARAMETER ESTIMATION USING FRF SENSITIVITY MODEL UPDATING AND KARHUNEN-LOÈVE EXPANSION. In: ICEDyn 2015 - International Conference on Structural Engineering Dynamics, 2015, Lagos-Portugal. ICEDyn 2015 - International Conference on Structural Engineering Dynamics, 2015.

  • PEGORETTI, T. S. ; MACHADO, M. R. ; ARRUDA, J. R. F. ; SANTOS, J. M. C. . Uncertainty analysis of porous material parameters using random fields. In: International Symposium on Uncertainty Quantification and Stochastic Modeling, 2014, Rouen - France. Symposium on Uncertainty Quantification and Stochastic Modeling, 2014. v. 2.

  • MACHADO, M. R. ; ADHIKARI, S. ; SANTOS, J. M. C. . Damage characterization in structures with random properties. In: International Symposium on Uncertainty Quantification and Stochastic Modeling, 2014, Rouen - France. Symposium on Uncertainty Quantification and Stochastic Modeling, 2014. v. 2.

  • MACHADO, M. R. ; SANTOS, J. M. C. . Damage Detection in an Energy Flow Model Including Parameter Uncertainty. In: IMAC-XXXI CONFERENCE AND EXPOSITION ON STRUCTURAL DYNAMICS, 2013, Garden Grove, California. IMAC-XXXI CONFERENCE AND EXPOSITION ON STRUCTURAL DYNAMICS, 2013.

  • MACHADO, M. R. ; SANTOS, J. M. C. . WAVE PROPAGATION IN A CRACKED BEAM SPECTRAL ELEMENT INCLUDING PARAMETER UNCERTAINTY. In: Uncertainteis, 2012, Maresias. Uncertainteis, 2012.

  • MACHADO, M. R. ; SANTOS, J. M. C. . DETECÇÃO DE DANO E ANÁLISE ESTOCÁSTICA DE UMA VIGA TRINCADA UTILIZANDO O MÉTODO DO ELEMENTO ESPECTRAL. In: VII Congresso Nacional de Engenharia Mecânica, 2012, São Luis do Maranhão. VII Congresso Nacional de Engenharia Mecânica, 2012.

  • MACHADO, M. R. ; SANTOS, J. M. C. . STOCHASTIC ANALYSIS OF WAVE PROPAGATION IN A CRACKED ROD VIA SPECTRAL ELEMENT AND POLINIMIAL CHAOS EXPANSION. In: Innowave 2012, 2012, Nottingham - UK. Innowave 2012, 2012.

  • MACHADO, M. R. ; PEGORETTI, T. S. ; SANTOS, J. M. C. ; ARRUDA, J. R. F. . RELIABILITY ANALYSIS USING SIMPLE MODELS AIMING AT A COMPARISON AMONG STOCHASTIC METHODS. In: International Congress on sound and vibration, 2011, Rio de Janeiro. International Congress on sound and vibration, 2011.

  • MACHADO, M. R. ; SANTOS, J. M. C. . RELIABILITY ANALYSIS FOR PROBABILISTIC FATIGUE CRACK GROWTH. In: 21st Brazilian Congress of Mechanical Engineering, 2011, Natal. 21st Brazilian Congress of Mechanical Engineering, 2011.

  • R. MACHADO, MARCELA . Metamaterial solutions for stability control and performance in wind energy harvesting,SPARC Workshop,National Institute of Technology,Silchar India, 2025. 2025. (Apresentação de Trabalho/Simpósio).

  • R. MACHADO, MARCELA . Smart metamaterial for tremor control in biomechanical system, SPARC Workshop,National Institute of Technology,Silchar India, 2025. 2025. (Apresentação de Trabalho/Simpósio).

  • R. MACHADO, MARCELA . Smart Monitoring and Control for Enhanced Wind Energy Harvesting Performance, FemTO-ST,Besançon France, 2025. 2025. (Apresentação de Trabalho/Seminário).

  • R. MACHADO, MARCELA . Design and optimization of smart wind turbines to vibration control and structural monitoring, Bydgoszcz University of Science and Technology, Poland.. 2024. (Apresentação de Trabalho/Seminário).

  • R. MACHADO, MARCELA . The use of machine learning to enhance structural health monitoring, Silesian University of Technology, Gliwice - Poland. 2024. (Apresentação de Trabalho/Seminário).

  • R. MACHADO, MARCELA . Smart wind turbines to vibration control and structural monitoring,Politechnika Gdanska, Gdansk - Poland. 2023. (Apresentação de Trabalho/Comunicação).

  • MACHADO, M.R. . Atenuação e monitoramento de tremores do corpo humano através de metamaterias programáveis. 2022. (Apresentação de Trabalho/Seminário).

  • MACHADO, M. R. . Vibrational and spectral approach for damage quantification, INSA de Rouen, Rouen - France. 2018. (Apresentação de Trabalho/Conferência ou palestra).

  • R. MACHADO, MARCELA . A spectral approach for damage quantification and parameter estimation, INSA de Rouen, Rouen, France. 2018. (Apresentação de Trabalho/Seminário).

  • MACHADO, M. R. . A spectral approach for damage quantification and parameter estimation,INSA de Rouen, Rouen - France. 2017. (Apresentação de Trabalho/Seminário).

  • R. MACHADO, MARCELA . Estimação de parâmetros estruturais através da sua resposta dinâmica,Universidade Nova de Lisboa, Lisboa-Portugal. 2017. (Apresentação de Trabalho/Seminário).

Outras produções

MACHADO, M.R. . Pesquisa translacional em saúde para o enfrentamento da COVID-19: Desenvolvimento e produção do respirador VESTA como equipamento de proteção individual. 2020. (Programa de rádio ou TV/Entrevista).

Machado, Marcela Rodrigues . personal website: marcelamachados's page. 2023. (Site).

MACHADO, M. R. . Grupo de dinâmica de sistemas. 2017. (Site).

Machado, Marcela Rodrigues . Relatório Técnico de pestração de contas do projeto Tecnologia baseada em metaestruturas inteligentes para atenuar tremores no corpo humano. 2022. (Relatório técnico).

MACHADO, M.R. . Workshop de propagação de ondas em estruturas. 2020. (Workshop).

MACHADO, M.R. . Relatório de pestração de contas do projeto processo 0193-001512/2017: Método estocástico de detecção de danos estruturais via abordagem espectral. 2020. (Relatório técnico).

MACHADO, M.R. . Escola de Inverno em Modelagem Estocástica e Quantificação de Incerteza. 2017. (Workshop).

Projetos de pesquisa

  • 2025 - Atual

    Structural Monitoring of Wind Turbines Using Multifysical Data-driven with Machine Learning and Deep Learning, Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (1) / Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Jose Maria Campos Dos Santos - Integrante / Jefferson da Silva Coelho - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante / Rafael Teloli - Integrante / Emmanuel Ramasso - Integrante.

  • 2024 - 2025

    Monitoramento da integridade estrutural de estruturas e sistemas usando inteligência artificial, Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Maciej Dutkiewicz - Integrante / Jefferson da Silva Coelho - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante.

  • 2024 - Atual

    Metamaterial inteligente programável para supressão de tremores de Parkinson em membros humanos, Descrição: In response to these challenges, a groundbreaking project has been initiated to develop an innovative wearable technology capable of mitigating and monitoring tremors in the human body. This technology utilizes metamaterial and programmable metastructures specifically designed for a specific part of the human limbs. Initial laboratory validations have already demonstrated a good attenuation level by using that metastructure within the frequency range of Parkinson's disease tremors (3 to 12 Hz). However, further rigorous testing and refinement of the technology's design are still under investigation. In addition, this research proposal seeks to establish a multidisciplinary group focused on developing research in various mechanical, electrical, and biomechanical aspects of this theme, driving innovation and progress in Parkinson's disease treatment. This innovative technological research project aims to develop an accessible technology based on metamaterials and programmable metamaterials for suppressing tremors in patients with Parkinson's disease. The technology will have the versatility to be lightweight, easily reprogrammable for other frequency ranges, and cover a wide band of frequency operation___________Este projeto é financiado pela Fundação de Apoio a Pesquisa do Distrito Federal (FAPDF).. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (1) / Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Braion Barbosa de Moura - Integrante / Sudip dey - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante / Tanmoy Mukhopadhyay - Integrante / Gabriel Guimaraes de Souza Braga de Albuquerque - Integrante / Carlos Eduardo Pereira da Silva - Integrante., Financiador(es): Fundação de Apoio à Pesquisa do Distrito Federal - Auxílio financeiro.

  • 2023 - 2025

    Design and optimization of smart wind turbines to vibration control and structural monitoring - SWinT, Descrição: A reliable power supply is important for the sustainable development of the economy. Thetrend to reduce greenhouse gas emissions results in increased of renewable energy investment.Wind energies are one of the existing technologies that would subside the reduction of dependence on coal, oil, and gas and unlock huge amounts of investment in the near future. Despite numerous control strategies, vibration is still a real problem of wind turbines(WT), holding a few limitations of turbine technology. A reliable wind turbine represents effective energy production and economy. This research project proposes techniques for designing and optimizing of WT using metamaterials and smart metastructures to enhance specific vibration control, mitigation, and monitoring the integrity of WT. Mechanical and electromechanical resonators have been used to promote vibration control of dynamic systems, where the electronic shunt circuits are responsible for promoting passive control. This research fulfils the gap in using and developing these smart metastructures applied to the turbine design. Investigating the optimized topology of resonating shunt circuits and mechanical absorbers aiming the efficiency, lower costand multiple comprehensive applications of those metamaterials on the turbines vibration control and stabilization. The smart metastructures can also monitor the system vibration, elastic waves, and can support on the detection of discontinuities and malfunction. In addition, this proposal search for a multidisciplinary research group to develop the next generation of these smart-wind turbines designed to perform broadband vibration mitigation, control, and monitoring is applied to the industrial sector. The development of smart turbines is in full progress in its research and is expected to deliver a research-level TRL-3 at the end of this project.___________This research is part of the project No. 2022/45/P/ST8/02123 co-funded by the National Science Centre and the European Union Framework Programme for Research and Innovation Horizon 2020 under the Marie Sklodowska-Curie grant agreement no.945339.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Maciej Dutkiewicz - Integrante / Jefferson da Silva Coelho - Integrante., Financiador(es): Narodowe Centrum Nauki - Cooperação.Número de orientações: 2

  • 2022 - 2024

    Projeto de metaestruturas inteligentes para controle e atenuação de vibração e tremores em sistemas, Descrição: O presente projeto de pesquisa propõe técnicas no âmbito o design de metamateriais e metaetruturas inteligentes visando o controle e atenuação devibrações e tremores em sistemas aplicados ao setor industrial e bioengenharia. O circuitos shunts são responsáveis por promover o controle, investigar a optimização da topologia desses circuitos refletirá em eficiência, menor custo e muiltiaplicações abrangentes do metamaterial inteligente. Esta pesquisa preenche ainda mais a lacuna na utilização e desenvolvimento dessesmetamateriais inteligentes, que por sua vez tem a flexibilidade das vantagens de fáceis ajustes em uma ou multi bandas de frequências, baixo custo, agregando a versatilidade dos materiais inteligentes com o design de metaestruturas. O desenvolvimento dos metamateriais inteligentes está em pleno avancco em suas pesquisas, ao final desse projeto entregaremos uma pesquisa nível TRL-3.___________Este projeto é financiado pela Fundação de Apoio a Pesquisa do Distrito Federal (FAPDF). No.0019300000826/2021-55. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (2) / Doutorado: (1) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Braion Barbosa de Moura - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante / Ingrid Lopes - Integrante / Carlos Eduardo Pereira da Silva - Integrante., Financiador(es): Fundação de Apoio à Pesquisa do Distrito Federal - Auxílio financeiro.

  • 2022 - 2022

    Tecnologia baseada em mestaestruturas inteligentes para atenuar tremores no corpo humano, Descrição: Este projeto teve como objetivo estudar a viabilidade de um tecnologias baseadas em metaestruturas inteligentes aplicada ao controle de tremores no corpo humano. Utilizou-se a lógica de controle vibracional da presente tecnologia é baseada na capacidade de absorção da vibração por meio da utilização do material funcional do tipo metamateriais inteligentes formados por arranjos periódicos de transdutores piezoelétricos acoplados com circuitos elétricos passivos. Viabilizou-se análises e estudos da presente tecnologia cuja as funcionalidades podem atenuar ou até suprimir os tremores no corpo humano de origem fisiológica ou patológica, tanto em regime de movimento estacionário ou dinâmico dos membros sujeitos ao tremor. ___________Este projeto é financiado pela Fundação de Apoio a Pesquisa do Goias (FUNAPE).. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (1) / Doutorado: (1) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Jefferson da Silva Coelho - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante / Akane Makendê - Integrante., Financiador(es): Fundação de Apoio à Pesquisa - Auxílio financeiro.

  • 2022 - Atual

    Projeto e otimização de materiais funcionais inteligentes para atenuação e controle de vibrações em sistemas mecânicos e biomecânicos, Descrição: O presente projeto de pesquisa propõe técnicas no âmbito do projeto e otimização de materiais funcionais enviesando metamateriais e metaetruturas inteligentes aplicados no controle e atenuação de vibrações e tremores em sistemas aplicados ao setor industrial e da bioengenharia. Materiais e metamateriais inteligentes acoplados a circujavascript:void(0)itos eletrônicos do tipo shunt são responsáveis por promover o controle em sistemas. Investigar a optimização da topologia desses circuitos refletirá em eficiência, menor custo e muiltiaplicações abrangentes deste material funcional. Esta pesquisa preenche ainda mais a lacuna na utilização e desenvolvimento desses metamateriais inteligentes, que por sua vez tem a flexibilidade das vantagens de fáceis ajustes em uma ou múltiplas bandas de frequências, baixo custo, agregando a versatilidade dos materiais inteligentes com o design de metaestruturas. No âmbito industrial, tais materiais são aplicados em elementos estruturas, dutos, colunas e sistemas acoplados visando a promoção do controle e atenuação de vibração além do seu monitoramento dinâmico. Na bioengenharia, esses materiais funcionais são utilizados para promover controles e o monitoramento de tremores providos de doenças crônicas.___________Este projeto é financiado pelo Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq).. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (1) / Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Adriano Todorovic Fabro - Integrante / Aline Paula de Souza - Integrante / Tomé Seichi - Integrante / Vitória Carolina Silva Duarte - Integrante / Braion Barbosa de Moura - Integrante / Sudip dey - Integrante / Jefferson da Silva Coelho - Integrante / Tanmoy Mukhopadhyay - Integrante / Daniel Bonfim - Integrante., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro.

  • 2022 - Atual

    Controle e otimização em turbinas eólicas offshore para redução de vibração e monitoramento estrutural, Descrição: Este projeto tem como objetivo principal o desenvolvimento de técnicas de controle e otimização para redução de vibrações e monitoramento estrutural de turbinas eólicas offshore. O projeto é dividido em dois temas, conforme descrito a seguir. Controle de vibrações e monitoramento estrutural de torres (Tema 1): O objetivo central desse tema consiste no projeto e otimização de metaestruturas e metaestruturas inteligentes para atenuação de vibrações em torres eólicas offshore e, no último caso, na utilização da metaestrutura simultaneamente para monitoramento da integridade estrutural. Como objetivos secundários tem-se: A. Análise dinâmica da torre a partir de modelo nacele + pás + torre + fundação considerando diferentes modelos para as forças geradas pela ação do vento, incluindo formulação fluido-estrutura; B. Projeto da meta-turbina, torre com absorvedores mecânicos acoplados, e investigação da dinâmica e topologia da metaestrutura visando supressão e redução dos níveis de vibração; C. Projeto da meta-turbina inteligente, torre com absorvedores eletromecânicos acoplados (circuitos shunt conectados a piezo patch), com investigação do arranjo topológico para instalação dos sensores para monitoramento da integridade estrutural e investigação de diferentes efeitos de circuito shunt para controle de vibrações; D. Avaliação do impacto de metamateriais inteligente (metaestruturas) na indústria eólica offshore. Interação entre controle do gerador elétrico e vibração torsional do sistema de transmissão eletromecânica (Tema 2): O objetivo principal deste tópico é avaliar os efeitos do controle de geradores, a partir de algoritmos de maximização do ponto de extração (MPPT) tipicamente aplicados em sistemas eólicos frente às variações do vento com aplicações offshore, nas vibrações mecânicas torcionais do sistema de potência. Os objetivos secundários são: A. Obtenção de um modelo para representar a vibração torsional da parte mecânica do sistema de transmissão, incluindo imperfeições que geram vibrações excessivas, e avaliação da resposta dinâmica. Pretende-se também avaliar como estas vibrações comprometem a qualidade e eficiência da energia gerada; B. Obtenção de modelo do sistema mencionado no item A, incluindo a dinâmica do gerador, conversores de potência e seus controladores; C. Montagem de uma bancada experimental, calibração de um sistema de sensores de grandezas elétricas e mecânicas para emulação do sistema eólico, para validação de modelos e simulações, e para implementação e avaliação de algoritmos para maximizar o ponto de extração.. , Situação: Em andamento; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Integrante / Adriano Todorovic Fabro - Integrante / Aline Paula de Souza - Coordenador / Vitória Carolina Silva Duarte - Integrante / Jefferson da Silva Coelho - Integrante., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro.

  • 2021 - 2024

    Dispositivo inteligente para medições quantificadas e atenuação de distúrbios do movimento, Descrição: O presente projeto de pesquisa propõe técnicas no âmbito o design e otimizaçãode metamateriais e metaetruturas inteligentes visando o controle e atenuação devibrações e tremores em sistemas aplicados ao setor industrial e bioengenharia.Circuitos shunts são responsáveis por promover o controle dinâmicos de sistemas,investigar e optimizar da topologia desses circuitos refletirá em eficiência, menor custoe muiltiaplicações do metamaterial inteligente. Esta pesquisa preenche ainda mais alacuna na utilização e desenvolvimento desses metamateriais inteligentes, que por sua vez tem a flexibilidade das vantagens de fáceis ajustes em uma ou multi bandas de frequências, baixo custo, agregando a versatilidade dos materiais inteligentes com o design de metaestruturas. Em adição à vértice acadêmica desta proposta, visa-se criará um grupo de pesquisa multidisciplinar, cujo objetivo é desenvolver a próxima geração desses metamateriais inteligentes e inserir a sua utilização nos setores industriais e da bioengenharia visando medições quantificadas, atenuação de vibrações e distúrbios do movimento.___________Este projeto é financiado pela Fundação de Apoio a Pesquisa do Distrito Federal (FAPDF). No.0019300000766/2021. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (4) / Mestrado acadêmico: (2) / Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Adriano Todorovic Fabro - Integrante / Aline Paula de Souza - Integrante / Matheus Canêdo Ribeiro Borges - Integrante / Braion Barbosa de Moura - Integrante / Gabriel Guimaraes de Souza Braga de Albuquerque - Integrante / Carlos Eduardo Pereira da Silva - Integrante / Akane Makendê - Integrante / Nícolas Dias - Integrante., Financiador(es): Fundação de Apoio à Pesquisa do Distrito Federal - Auxílio financeiro., Número de produções C, T & A: 3 / Número de orientações: 1

  • 2020 - 2022

    Plataforma Demonstradora Tecnológica para Métodos Inversos e Modelagem de Incertezas em Integridade de Estruturas e Componentes, Descrição: O Projeto Plataforma Demonstradora Tecnológica para Métodos Inversos e Modelagem de Incertezas em Integridade de Estruturas e Componentes foi elaborado como um texto-base para planejamento estratégico de atividades de pesquisa portadoras de futuro em ?Métodos Inversos e Modelagem de Incertezas em Integridade de Estruturas e Componentes? englobando diversos aspectos de sua motivação e contextualização, e especificando algumas áreas e linhas de pesquisa de potencial interesse do projeto. Como aspectos de motivação deste projeto, pode-se citar: ? O projeto é uma plataforma multidisciplinar de P, D & I, com potencial de nucleação de um centro de excelência em temas na fronteira do conhecimento, como Métodos Inversos e Modelagem de Incertezas, e com estrutura organizacional que poderá guardar similitudes com a estrutura típica de Centros Nacionais ou Institutos Nacionais de Ciência e Tecnologia (INCT); ? A modelagem de problemas inversos e incertezas associadas tem relevância para aplicações em detecção, monitoramento e diagnóstico de falhas, tolerância ao dano e integridade de estruturas e componentes; ? O projeto contempla uso de ferramentas computacionais de modelagem e simulação e emprego de técnicas experimentais de laboratório em atividades de pesquisa de alto impacto científico em áreas estratégicas, de potencial interesse da indústria aeronáutica/aeroespacial, automobilística, nuclear e de energia/petróleo; ? O projeto busca conciliar o interesse tanto em pesquisa acadêmica quanto em desenvolvimento tecnológico; ? O projeto envolve atividades de pesquisa colaborativa, com potencial de estabelecimento de cooperações com outros grupos / instituições de pesquisa e universidades, no Brasil e no exterior; ? O projeto envolve atividades de pesquisa, desenvolvimento tecnológico e inovação com potencial de estabelecimento de parcerias com empresas de elevado conteúdo tecnológico, dos setores da indústria aeronáutica/aeroespacial, automobilística, nuclear e de energia/petróleo; e ? O projeto permite o envolvimento de pesquisadores e alunos de pós-graduação com interesses em diferentes áreas e linhas de pesquisa, com potencial de contribuir na formação de recursos humanos na pós-graduação, e na nucleação de temas pesquisa de interesse do mestrado e de um futuro doutorado do PPG-Integridade. e link: https://repositorio.unb.br/handle/10482/39570. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Integrante / Marcus Vin~icius Girão de Morais - Integrante / Éder Lima de Albuquerque - Integrante / ARIOSTO BRETANHA JORGE - Coordenador / CARLA TATIANA MOTA ANFLOR - Integrante / JHON NERO VAZ GOULART - Integrante / SERGIO HENRIQUE DA SILVA CARNEIRO - Integrante.

  • 2020 - 2022

    Projeto de Pesquisa e Inovação e Extensão - Respirado com Nanotecnologia para Filtragem do COVID 19 -Coronavírus-LOTE PILOTO, Descrição: A necessidade de producao de insumos sanitarios sumamente urgentes para responder a emergencia gerada pela pandemia do COVID-19 sobre o bem comum e foco de importante contribuicao da ciencia nesse momento. Devido a grande demanda por mascaras e outros equipamentos destinados ao combate ao COVID-19, tanto por parte da equipe de saude publica, temos presenciado falta de disponibilidade de equipamento de protecao individual (EPI), como mascaras. Este fato potencializa o risco de contaminacao por SARS-CoV-2, principalmente para profissionais de saude que lidam diariamente com pacientes e ambientes contaminados. A nanotecnologia e uma ciencia emergente na qual se empregam nanomateriais, oferecendo uma oportunidade unica de tratamento atraves da modificacao de superficies com impacto direto no campo biomedico. Dependendo do tipo de nanomaterial, essa propriedade pode ser empregada na construcao de superficies inteligentes. Neste contexto, o uso de nanomateriais em mascaras poderia diminuir a permeabilidade de particulas e promover um efeito biocida em comparacao com mascaras convencionais como a N95 e, portanto, potencializar o poder filtrante, visando a mitigacao dos efeitos nocivos de bacteria e virus no ambiente hospitalar. A quitosana e um polimero cationico natural, derivado da quitina, com caracteristicas importantes para o emprego em uma nova tecnologia, como ser biodegradavel, biocompativel, nao toxica e apresentar atividade antimicrobiana. Alem disso, e um material de baixo custo. Este polimero apresenta atividade virucida em varios tipos de virus, incluindo outros sorotipos de coronavirus, dado o fator atrativo de sua carga cationica para cargas negativas, como e o caso dos virus. Dessa forma, a quitosana pode atuar como superficie de adsorcao e de inativacao viral. Neste estudo, visamos comparar a eficacia de filtracao de virus, especialmente SARS-CoV-2, em mascaras contendo nanofilmes de quitosana em relacao a mascara padrao N95 utilizadas por profissionais de saude. Traca-se a hipotese de que a mascara com nanomateriais reduzira a contaminacao do usuario pelo SARS-CoV-2, visto que possuira filtro extra formado por poros ultrafinos, alem de apresentar superficie com atividade virucida. A inovacao do produto apresentado engloba a fusao do conhecimento de nanofilmes, ja consolidado na literatura, associados a uma mascara, confeccionada dentro dos moldes tecnicos e normativos especificos a categoria na qual ela sera utilizada. O ensaio clinico sera reportado conforme as recomendacoes do CONSORT Statement, e consistira em duas etapas denominadas ? i) Ensaio Piloto com amostra reduzida Esse estudo clinico sera conduzido com profissionais de saude que tem contato com infectados por SARS-CoV-2 em setores hospitalares com maior vulnerabilidade a infeccao (urgencia, emergencia e UTI). O ensaio piloto sera conduzido inicialmente com um grupo de cinquenta participantes (n=25 em cada grupo ? grupo experimental e grupo controle) para investigacao inicial do potencial de eficiencia e toxicidade com o uso das mascaras (mascara VESTA e mascara convencional N95) em dois setores (emergencia e UTI ? unidade de terapia intensiva) do Hospital HRAN (Hospital Regional da Asa Norte) em Brasilia e em Unidades de Pronto Atendimento da Secretaria Municipal de Saude de Goiania. A duracao do protocolo experimental sera de uma a duas semanas a depender da escala de plantao dos profissionais de saude que serao participantes da pesquisa. Sabe-se que a escala de plantao dos participantes pode variar entre 4 a 8 h, mas se optara por avaliar o uso em escalas de plantao de 8 horas a fim de padronizar as condicoes experimentais. O uso da mascara nao devera exceder 8 horas de uso continuo e deve ser exclusivo para procedimentos medicos no hospital. Os participantes de pesquisa serao avaliados em relacao ao seu estado de saude geral e receberao acompanhamento.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (3) / Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Integrante / Suélia de Siqueira Rodrigues Fleury Rosa - Coordenador / Braion Barbosa de Moura - Integrante / Matheus Filippe Santos Alves - Integrante / Caio César Abreu Bílio - Integrante / Léo Diniz Czarnewski - Integrante., Financiador(es): Fundação de Apoio à Pesquisa do Distrito Federal - Auxílio financeiro., Número de produções C, T & A: 7

  • 2019 - 2023

    Periodic structure design and optimization for enhanced vibroacoustic performance: ENVIBRO, Descrição: This proposal combines the efforts of research groups from the University of Sao Paulo, State University of Sao Paulo, University of Campinas, Technological Institute of Aeronautics and a number of international collaborators to investigate periodic structures in the context of phononic materials and elastic/acoustic metamaterials. Phononic materials and elastic/acoustic metamaterials can be tailored so that they exhibit specific behavior, such as wave focusing and funneling, diode mechanisms, frequency bandgaps, and energy localization, not observed in natural materials. They have great potential to replace traditional materials in demanding engineering applications and to pave the way for innovative solutions of several engineering problems. The proposal is organized in four work packages to address current scientific challenges related to nearly periodic and coupled structures, design and optimization of metastructures, nonlinear periodic structures and smart metastructures. The intersections of the work packages and the expected achievements have great potential to enable new insights as well as applications with relevant scientific and technological innovation for Mechanical and Aerospace Engineering problems. The distributed nature of the research team in the State of Sao Paulo will ensure that a wide network of researchers in the relatively new area of metamaterials will be formed. This will help to nurture the next generation of Brazilian engineers in this important area.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Integrante / Jose Maria Campos Dos Santos - Integrante / Braion Moura - Integrante / Carlos de Marqui Junior - Coordenador / Matheus Canedo - Integrante.

  • 2019 - 2022

    RAinbow Smart-Metastructure analysis and design for vibration attenuation - RAinSMet, Descrição: The project RAinSMet proposes the development of techniques able to predict wave propagation properties in near-periodic structures with slowly varying properties, study the impact of the correlated disorder on waves in rainbow-based metamaterial design, and investigate wavebased design approaches for near-periodic smart structures of exceptional dynamic properties. RAinSMet has the potential to bridge further the gap of the latter approach, which naturally arises by combining the "easy-to-tune" advantages of smart-materials with the rainbow-based metastructure design. Besides developing the research, the project will create an internationally competitive multi-university research group whose aim is to develop the next generation of rainbow-based elastic metamaterials. In this context, this project is at the level TRL-1, and by the end, we expect to deliver a TRL-3 with results and applications regarding the aerospace sector.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Mestrado acadêmico: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Braion Moura - Integrante / Matheus Canedo - Integrante / Sudip dey - Integrante.

  • 2018 - 2022

    Verificação numérica e experimental da propagação de ondas elásticas em estruturas e em smart-metamaterial, Descrição: Verificação numérica e experimental da propagação de ondas elásticas em estruturas cujo objetivo geral é a aplicação da teoria de vibrações e propagação de ondas em estruturas para detecção e quantificação de danos, bem como em metamaterial composto por piezoelétricos shunt no contexto de atenuação e controle de vibrações.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Coordenador / Michel L. Duwe - Integrante / Braion Moura - Integrante.

  • 2018 - 2021

    Metodo estocástico de detecção de danos estruturais via abordagem espectral, Descrição: O objetivo desta e desenvolver um metodo para detectar, localizar e quanticar danos em sistemas estruturais e mecânicos incluindo incertezas nos parametros. O metodo de propagacao de onda utilizado e o elemento espectral (SEM) em conjunto com metodo para modelagem estocastica e quanticacao de incertezas, bem como metodo de monitoramento estrutural (SHM) sao usados para desenvolver um novo metodo de deteccao estocastica de danos estruturais. O projeto visa aplicar essa tecnica em monitoramento das estruturas tais como, torres e pas de turbinas eolicas, estruturas aeroespaciais e estruturas metalicas e compositas em geral.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Coordenador / Tomé Seichi - Integrante / Michel L. Duwe - Integrante., Financiador(es): Fundação de Apoio à Pesquisa do Distrito Federal - Auxílio financeiro., Número de produções C, T & A: 3

  • 2017 - 2022

    Damage detection, monitoring, and fatigue tests in structure by wave propagation and vibration signature, Descrição: The application of metallic and composite material in aeronautical and aerospace industries has been increasing the last several decades. Compared to metallic material composites present better strength to weight and stiffness to weight ratios. However, in contrast to other used materials like aluminum they are very weak to impacts and most damages. The dominant physical mechanisms of damage in composites are matrix cracking, fiber failure, fiber-matrix debonding and delamination, which are no longer detectable by visual inspection. Therefore, the structural health monitoring of composites and metallic is therefore an important area of current research, especially for experimental analysis. Uncertainty in the performance of metallic and composite structures under a load can be largely addressed through material, geometric and structural considerations. The high level of uncertainty in composite materials is mainly associated with the manufacturing processes. Therefore, uncertainty in the metallic and composite material parameters is reflected in the variability of stiffness and strength descriptors affecting the overall performance. All the above factors complicate the definition and quantification of uncertainty in design and assessment of such structures. This project is focused on damage detection and propagation in metallic and composite materials under uncertainty properties and sob influence of random excitation. Numerical and experimental techniques involving dynamic measures based on velocity, acceleration and strain will be developed and applied in the proposed project.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Mestrado acadêmico: (1) Doutorado: (1) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Tiago A.N. Silva - Integrante / Leila Khalij - Integrante / Juliana Cardoso Santos - Integrante., Financiador(es): Institut National des Sciences Appliquées de Rouen - Cooperação., Número de produções C, T & A: 7 / Número de orientações: 1

  • 2016 - 2017

    Detection of structural damage and degradation under uncertainty, Descrição: This project will help to initiate a new research collaboration between the two applicants in an emerging technology of GW-based SHM which has significant industrial application especially in aerospace structures. The work will also inform and support top priority research programmes of both research groups in the two countries. This programme brings together the skills of Dr Abhishek Kundu (Cardiff University) on stochastic computational methods, uncertainty quantification and structural health monitoring with those of Dr Marcela Machado (UnB) as a young academic (lecturer) and researcher in structural damage detection in stochastic dynamics system via wave propagation method. Dr Abhishek Kundu is a young lecturer establishing his own research portfolio at the Cardiff University and Dr Machado has recently finished his PhD degree from the University of Campinas -Brazil with an internship period at Swansea University-UK. For the proposed research programme, the skills and backgrounds of the two applicants ideally complement each other which will provide an added value to this project, both in terms of the research quality and the speed and efficiency with which the applicants? individual programmes can be advanced.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Marcela Rodrigues Machado - Coordenador / Abhishek Kundu - Integrante / Bruno Pereira Santos - Integrante., Financiador(es): Newton Fund - Cooperação.

Projetos de desenvolvimento

  • 2020 - Atual

    Desenvolvimento e implementação de tecnologia estratégica para o SUS na prevenção e combate ao SARS-CoV-2: equipamento de proteção individual inovador com nanopartículas de quitosana para uso dos profissionais da saúde: Modelagem matemática e simulações, Descrição: A velocidade de propagação da doença COVID-19 culminou em um alerta da Organização Mundial da Saúde (OMS), que classifica a doença emergente como uma pandemia, caracterizada por um agravo de saúde internacional e de caráter emergencial. A crescente demanda por obtenção de respiradores e a falta de disponibilidade desse equipamentos de proteção individual (EPI) para profissionais de saúde motivou pesquisadores de várias áreas da Universidade de Brasília a auxiliar na força-tarefa de disponibilizar material de proteção que tenha uma eficácia na filtração do vírus COVID19, proporcionando a esses profissionais um ambientes de trabalho mais seguro. A adoção de medidas emergenciais se faz necessária de tal modo que se evite o alastramento da doença no país e o colapso do sistema de saúde brasileiro. Frente a este cenário, os profissionais da saúde estão altamente expostos ao SARS-CoV-2, tendo em vista a grande demanda dos sistemas de saúde para lidar com a pandemia. O objetivo deste é projetar EPIs (VESTA e máscaras face shields) e equipamentos (válvula e conector para respiradores) para ajudar no avanço do COVD-19. Avaliar o ciclo de vida dos produtos desenvolvidos visando a produção em larga escala dos produtos, abrangendo desde as etapas de design do produto até a o seu descarte. Isso significa que o processo produtivo já está estruturado com seus respectivos stakeholders definidos em cada fase do processo com os requisitos regulatórios.. , Situação: Em andamento; Natureza: Desenvolvimento. , Alunos envolvidos: Graduação: (3) / Mestrado acadêmico: (1) / Doutorado: (1) . , Integrantes: Marcela Rodrigues Machado - Integrante / Braion Moura - Integrante / Suélia de Siqueira Rodrigues Fleury Rosa - Coordenador / Juliana Cardoso Santos - Integrante.

  • 2024 - Atual

    Desenvolvimento de Plataforma para Monitoramento da integridade estrutural de estruturas and sistemas usando inteligência artificial, Descrição: ste projeto de desenvolvimento visa desenvolver um programa de computador (software ou plataforma) abrangendo técnicas de SHM com as de ML para monitoramento de sistemas dinâmicos. Este terá como input signais espectrais acquisitados de sistemas em uma pluralidade de domínios e como output retornará informação da integridade das estruturada monitorada.. , Situação: Em andamento; Natureza: Desenvolvimento. , Alunos envolvidos: Doutorado: (2) . , Integrantes: Marcela Rodrigues Machado - Coordenador / Jefferson da Silva Coelho - Integrante / Amanda Aryda Silva Rodrigues de Sousa - Integrante.

  • 2020 - Atual

    Desenvolvimento e implementação de tecnologia estratégica para o SUS na prevenção e combate ao SARS-CoV-2: equipamento de proteção individual inovador com nanopartículas de quitosana para uso dos profissionais da saúde: Modelagem matemática e simulações, Descrição: A velocidade de propagação da doença COVID-19 culminou em um alerta da Organização Mundial da Saúde (OMS), que classifica a doença emergente como uma pandemia, caracterizada por um agravo de saúde internacional e de caráter emergencial. A crescente demanda por obtenção de respiradores e a falta de disponibilidade desse equipamentos de proteção individual (EPI) para profissionais de saúde motivou pesquisadores de várias áreas da Universidade de Brasília a auxiliar na força-tarefa de disponibilizar material de proteção que tenha uma eficácia na filtração do vírus COVID19, proporcionando a esses profissionais um ambientes de trabalho mais seguro. A adoção de medidas emergenciais se faz necessária de tal modo que se evite o alastramento da doença no país e o colapso do sistema de saúde brasileiro. Frente a este cenário, os profissionais da saúde estão altamente expostos ao SARS-CoV-2, tendo em vista a grande demanda dos sistemas de saúde para lidar com a pandemia. O objetivo deste é projetar EPIs (VESTA e máscaras face shields) e equipamentos (válvula e conector para respiradores) para ajudar no avanço do COVD-19. Avaliar o ciclo de vida dos produtos desenvolvidos visando a produção em larga escala dos produtos, abrangendo desde as etapas de design do produto até a o seu descarte. Isso significa que o processo produtivo já está estruturado com seus respectivos stakeholders definidos em cada fase do processo com os requisitos regulatórios.. , Situação: Em andamento; Natureza: Desenvolvimento. , Alunos envolvidos: Graduação: (3) / Mestrado acadêmico: (1) / Doutorado: (1) . , Integrantes: Marcela Rodrigues Machado - Integrante / Braion Moura - Integrante / Suélia de Siqueira Rodrigues Fleury Rosa - Coordenador / Juliana Cardoso Santos - Integrante.

Prêmios

2025

WEDOWIND ASCE-EMI STRUCTURAL HEALTH MONITORING FOR WIND ENERGY CHALLENGE, ASCE-EMI and WEDOWIND ASCE-EMI, Eastern Switzerland University of Applied Sciences.

2024

Prêmio de inovação Darcy Ribeiro Isaías Raw categoria Transferência de tecnologia, na área da Ciências Exatas e da Terra, Universidade de Brasília.

2024

Pesquisador Inovador - Setor Empresarial, do III Prêmio FAPDF de Ciência, Tecnologia e Inovação, Fundação de Apoio à Pesquisa do Distrito Federal.

2023

Hofer Young Researcher Award, granted to young researchers demonstrating outstanding research performance, Associação Brasileira de Engenharia e Ciências Mecânicas.

2023

Gabriel Guimarães S.B. de Albuquerque, awarded IC Best project at 29° Congresso de Iniciação Científica da UnB e do Distrito Federal, Univesity of Brasilia and Distrito Federal.

2023

Prêmio de Inovação Darcy Ribeiro - Edição Nise da Silveira, Categoria Ourstanding Reserach Inovation, Univesity of Brasilia.

2023

Gabriel Guimarães S.B. de Albuquerque, awarded 1st place Scientific Iniciation project - Exact Science, 2 Premio FAP DF, Fundação de Apoio a Pesquisado Distrito Federal.

2022

Prêmio de Inovação Darcy Ribeiro - Edição "Marco Antônio Raupp", Categoria Temática Relevante - Categoria Temática Relevante - Inventor de tecnologias para o enfrentamento da COVID-19., Universidade de Brasília.

Histórico profissional

Endereço profissional

  • Universidade de Brasília, Campus Darcy Ribeiro. , Universidade de Brasília (UnB), Asa Norte, 70910900 - Brasília, DF - Brasil, Telefone: (61) 31075711

Experiência profissional

2023 - 2025

Bydgoszcz University of Science and Technology

Vínculo: Professor Visitante, Enquadramento Funcional: -

2016 - Atual

Universidade de Brasília, UnB

Vínculo: Servidor Público, Enquadramento Funcional: Professor Adjunto, Regime: Dedicação exclusiva.

Atividades

  • 07/2016

    Pesquisa e desenvolvimento, Campus Darcy Ribeiro, Engenharia Mecânica.,Linhas de pesquisa

2018 - 2018

Institut National des Sciences Appliquées de Rouen

Vínculo: Professor Visitante, Enquadramento Funcional: Professor visitante

2017 - 2017

Institut National des Sciences Appliquées de Rouen

Vínculo: Professor Visitante, Enquadramento Funcional: Professor Visitante, Carga horária: 1

Outras informações:
Professor visitante no Institut National des Sciences Appliquées de Rouen, Rouen, França, no período de 01/11 a 15/12/ 2017.

2016 - 2016

Universidade Federal do Maranhão

Vínculo: , Enquadramento Funcional: Professor adjunto A, Regime: Dedicação exclusiva.

2010 - 2016

Universidade Estadual de Campinas

Vínculo: Bolsista, Enquadramento Funcional: Mestrando e Doutorando, Regime: Dedicação exclusiva.

Atividades

  • 03/2010

    Pesquisa e desenvolvimento, Faculdade de Engenharia Mecânica.,Linhas de pesquisa

  • 02/2015 - 07/2015

    Ensino, Engenharia Mecânica, Nível: Graduação,Disciplinas ministradas, Mecanismos e Dinâmica da Máquinas.

  • 03/2012 - 07/2012

    Ensino, Engenharia Mecânica, Nível: Graduação,Disciplinas ministradas, Monitor na disciplina Mecanismos e Dinâmica da Máquinas.

  • 08/2011 - 12/2011

    Ensino, Engenharia Mecânica, Nível: Graduação,Disciplinas ministradas, Monitor na disciplaina de Elementos de Máquinas

2012 - 2013

Faculdade de Tecnologia de São Paulo - Av. Tiradentes

Vínculo: Servidor Público, Enquadramento Funcional: Professor

Atividades

  • 11/2012

    Ensino, Tecnologia Civil, Mecânica e Transporte, Nível: Graduação,Disciplinas ministradas, Resistência dos Materiais I, Resistência dos Materiais II

2008 - 2009

Calamari-TSI, -

Vínculo: Projetista mecânico, Enquadramento Funcional: -, Carga horária: 44, Regime: Dedicação exclusiva.

Outras informações:
Multinacional Italiana do segmento máquinas e equipamentos. Atividade: Projetos de Máquina (Fornos de Indução para aquecimento e fundição de metal), cálculo e projeto hidráulicos, layout para disposição e inastalação de máquinas e cálculo e projeto estruturais. Principais Ferramentas: SolidWorks, AutoCad, Asplan.

2007 - 2008

CCE, -

Vínculo: Projetista, Enquadramento Funcional: -, Carga horária: 44, Regime: Dedicação exclusiva.

Outras informações:
Grande indústria de bens de consumo duráveis. Atividade: Engenharia Mecânica- desenvolvimento de novos produtos (mecânica). Principais Ferramentas: Solid Edge, GED.

2002 - 2007

Componel (CCE Ferramentaria), -

Vínculo: Projetista, Enquadramento Funcional: -, Carga horária: 44, Regime: Dedicação exclusiva.

Outras informações:
Grande indústria do setor de plástico e borracha. Atividade: Projeto e detalhamento de moldes para injeção plástica ( p.e:moldes de extração simples, com gavetas, núcleo rotativo, dupla extração, com segmentos móveis, injeção por terceira placa e com sistema de câmara quente) para os setores automobilísticos e de bens de consumo duráveis, ferramentas de estamaparia de corte, dobra, repuxo, dispositivos e moldes para inejção de zamak. Principais Ferramentas: SolidWorks, Catia V5, AutoCad e Power Shape

2004 - 2005

Diboreli Ferramentari, -

Vínculo: Projetista (Prestador de Servi, Enquadramento Funcional: -, Carga horária: 44, Regime: Dedicação exclusiva.

Outras informações:
Projeto e detalhamento de moldes para injeção de plásticos.

2009 - 2010

KitFrame System, -

Vínculo: Projetista mecânico, Enquadramento Funcional: -, Carga horária: 44, Regime: Dedicação exclusiva.

Outras informações:
Multinacional Brasileira do segmento matalurgico de equipamentos. Atividade: Projetos de estruturas para gabinetes elétricos e trocador de calor. Principais Ferramentas: SolidWorks, AutoCad, Inventor, Team Work.

2000 - 2001

L&L Rebobinamento de Motores, -

Vínculo: Enrolador de motor., Enquadramento Funcional: -, Carga horária: 40, Regime: Dedicação exclusiva.

Outras informações:
? setembro de 2000 até dezembro 2001 Pequena empresa de componentes eletrônicos. Cargo: Enrolador de motor. Atividdade: Rebobinamento e manutenção de motores elétricos (trifásicos e monofásicos), motores de corrente contínua e motores de passo.