Luigi Carro
possui graduação em Engenharia Elétrica pela Universidade Federal do Rio Grande do Sul (1985), mestrado em Ciências da Computação pela Universidade Federal do Rio Grande do Sul (1989) e doutorado em Ciências da Computação pela Universidade Federal do Rio Grande do Sul (1996). Atualmente é professor titular do Instituto de Informática da Universidade Federal do Rio Grande do Sul. Tem experiência na área de Engenharia da Computação, com ênfase em Hardware e Software para Sistemas Embarcados, atuando principalmente nos seguintes temas: sistemas de baixa energia, arquitetura de processadores dedicados, aceleradores em hardware e software, circuitos tolerantes a falhas, teste de sistemas embarcados e desenvolvimento de software para multiplataformas.
Informações coletadas do Lattes em 17/06/2023
Acadêmico
Formação acadêmica
Doutorado em Computação
1991 - 1996
Universidade Federal do Rio Grande do Sul
Título: Arquiteturas e Arquiteturas para o desenvolvimento de Sistemas Computacionais
Altamiro Amadeu Suzim. Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil. Palavras-chave: Sistemas eletrônicos embarcados; Circuitos CMOS; Arquitetura de processadores dedicados; Prototipação de Sistemas.Grande área: Ciências Exatas e da TerraGrande Área: Ciências Exatas e da Terra / Área: Ciência da Computação / Subárea: Sistemas de Computação / Especialidade: Arquitetura de Sistemas de Computação. Grande Área: Engenharias / Área: Engenharia Elétrica / Subárea: Circuitos Elétricos, Magnéticos e Eletrônicos / Especialidade: Circuitos Eletrônicos. Setores de atividade: Informática; Industria Eletro-Eletrônica; Educação.
Mestrado em Computação
1986 - 1989
Universidade Federal do Rio Grande do Sul
Título: Gerador Parametrizável de Partes Operativas CMOS, Ano de Obtenção: 1989
Altamiro Amadeu Suzim.Bolsista do(a): Conselho Nacional de Desenvolvimento Científico e Tecnológico, CNPq, Brasil. Palavras-chave: Circuitos CMOS; Datapath generator.Grande área: EngenhariasGrande Área: Ciências Exatas e da Terra / Área: Ciência da Computação / Subárea: Sistemas de Computação / Especialidade: Hardware. Setores de atividade: Industria Eletro-Eletrônica; Informática; Educação.
Pós-doutorado
2001 - 2001
Pós-Doutorado. , University Of California At San Diego, UCSD, Estados Unidos.
Idiomas
Inglês
Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.
Espanhol
Compreende Bem, Fala Razoavelmente, Lê Bem, Escreve Pouco.
Italiano
Compreende Bem, Fala Bem, Lê Bem, Escreve Bem.
Francês
Compreende Bem, Fala Bem, Lê Bem, Escreve Pouco.
Áreas de atuação
Grande área: Ciências Exatas e da Terra / Área: Ciência da Computação / Subárea: Sistemas de Computação/Especialidade: Arquitetura de Sistemas de Computação.
Grande área: Ciências Exatas e da Terra / Área: Ciência da Computação / Subárea: Sistemas de Computação/Especialidade: Software Básico.
Grande área: Ciências Exatas e da Terra / Área: Ciência da Computação / Subárea: Sistemas de Computação/Especialidade: Hardware.
Grande área: Engenharias / Área: Engenharia Elétrica / Subárea: Circuitos Elétricos, Magnéticos e Eletrônicos/Especialidade: Circuitos Lineares e Não-Lineares.
Grande área: Engenharias / Área: Engenharia Elétrica / Subárea: Circuitos Elétricos, Magnéticos e Eletrônicos/Especialidade: Teoria Geral dos Circuitos Elétricos.
Grande área: Engenharias / Área: Engenharia Elétrica / Subárea: Medidas Elétricas, Magnéticas e Eletrônicas; Instrumentação/Especialidade: Instrumentação Eletrônica.
Organização de eventos
CARRO, L ; BERTELS, K. . ARC 2017. General Chair. 2017. (Congresso).
CARRO, L . ESWEEK CASES. TPC member.. 2017. (Congresso).
CARRO, L . DAC 2017. TPC member.. 2017. (Congresso).
CARRO, L . DATE 2018. TPC member.. 2017. (Congresso).
CARRO, L . ESWEEK CASES. TPC member.. 2016. (Congresso).
CARRO, L . ESWEEK CASES. TPC member.. 2015. (Congresso).
CARRO, L . ESWEEK CASES. TPC member.. 2014. (Congresso).
CARRO, L . ESWEEK CASES. TPC member.. 2013. (Congresso).
CARRO, L. . MICRO-44. 2011. (Congresso).
CARRO, L. . SAMOS - XI. 2011. (Congresso).
CARRO, L. . ESWEEK 2011 - Latin American Liason. 2011. (Congresso).
CARRO, L. . IOLTS TPC member. 2011. (Congresso).
CARRO, L. . ICCD 2007. 2007. (Congresso).
CARRO, L. . ISSS+CODES. 2007. (Congresso).
CARRO, L. . SAMOS Workshop. 2007. (Congresso).
CARRO, L. . FPL - Field Programmable Logic. 2007. (Congresso).
CARRO, L. . VLSI Test Symposium. 2006. (Congresso).
CARRO, L. . ETS 2006. 2006. (Congresso).
CARRO, L. . DATE 2006. 2006. (Congresso).
CARRO, L. . ETS 2005. 2005. (Congresso).
CARRO, L. . DATE 2005. 2005. (Congresso).
CARRO, L. . DATE 2004. 2004. (Congresso).
CARRO, L. ; WAGNER, Flávio Rech . SBCCI 2004. 2004. (Congresso).
Participação em eventos
SAMOS XI. Program Chair. 2011. (Congresso).
Workshop Reconfigurable Computing. Program Chair. 2011. (Congresso).
XV Escola Regional de Informática - Paraná.Grandes Desafios da Computação. 2009. (Seminário).
XV Escola Regional de Informática - Paraná.Engenharia de software para sistemas embarcados. 2009. (Seminário).
Panel: Adding value to D&T education - LATW 2005.Adding value to D&T education. 2005. (Simpósio).
LATW 2004. Program Chair. 2004. (Congresso).
Programa de Qualificação Institucional da UFRGS.Projeto e Prototipação de Sistemas Digitais. 2004. (Outra).
SBCCI 2004. Co-program Chair. 2004. (Congresso).
LATW 2003. Financial Chair. 2003. (Congresso).
Semana Acadêmcia do curso de Ciência da Computação de Erechim.Sistemas Embarcados e VHDL. 2003. (Encontro).
LATW 2002 - 3th IEEE Latin-American Test Workshop. Publication Chair. 2002. (Congresso).
Participação em bancas
KASTENSMIDT, Fernanda Gusmão de LimaNazar, G.BECK, Antonio CCarro, Luigi. A platform to evaluate the fault sensitivity of superscalar processors. 2017. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
SILVEIRA, F.;CARRO, L. Low-frequency RFID active devices for applications in the agribusiness industry. 2013. Dissertação (Mestrado em Engenharia e tecnologia) - Universidad Católica del Uruguay.
CARRO, L.. Alocação de dados e de código em memórias embaracdas: uma abordagem pós-compilação. 2010. Dissertação (Mestrado em Ciências da Computação) - Universidade Federal de Santa Catarina.
CARRO, L.. Uma exploração do esapço de projeto de processadores com hardware de ponto flutuante em FPGAs. 2010. Dissertação (Mestrado em Ciência da Computação) - Pontifícia Universidade Católica do Rio Grande do Sul.
CARRO, L.. Estimativa e redução da dissipação de potência em redes intra-chip com chaveamento por pacotes. 2009. Dissertação (Mestrado em Ciência da Computação) - Pontifícia Universidade Católica do Rio Grande do Sul.
CARRO, L.. Uma abordagem para modelagem e verificação de protocolos síncronos de barramentos de comunicação. 2008. Dissertação (Mestrado em Ciências da Computação) - Universidade Federal de Santa Catarina.
CARRO, L.. Alocação dinâmica de tarefas periódicas em NOCs malha com redução do consumo de energia. 2007. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Reuso especulativo de traços com instruções de acesso à memória. 2007. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Exploração do espaço de projeto de arquiteturas reconfiguráveis em arranjos. 2006. Dissertação (Mestrado em Ciência da Computação) - Universidade Federal de Viçosa.
CARRO, L.. Model order reduction methods for high-speed interconnects. 2006. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. DTM@JVM: reuso dinâmico de traços em uma máquina virtual Java. 2006. Dissertação (Mestrado em Engenharia de Sistemas e Computação) - Universidade Federal do Rio de Janeiro.
CARRO, L.. IEC - Uma Arquitetura XML para Computação Colaborativa P2P. 2005. Dissertação (Mestrado em Informática) - Universidade Federal do Rio de Janeiro.
SUSIN, Altamiro AmadeuCARRO, L.; LAGES, Walter Fetter. Ferramenta Para a Geração Otimizada de Filtros FIR Paralelos com Coeficientes Constantes. 2005. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CALVANO, José Vicente;KASTENSMIDT, Fernanda Gusmão de LimaSUSIN, Altamiro AmadeuCARRO, L.. Planejamento de Teste de Sistemas Embarcados em Núcleos de Hardware de Sinal Misto Usando BIST. 2005. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
WAGNER, Flávio RechCARRO, L.; MORAES, Fernando Gehm;ZEFERINO, Cesar Albenes. Mapeamento de Aplicações em Infra-estruturas de Comunicação Intrachip. 2005. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.WAGNER, Flávio Rech; FROHLICH, Antonio Augusto Medeiros. Framework Orientado a Objetos para Projeto de Hardware w Software Embarcados para Sistemas Tempo-Real. 2005. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.LUBASZEWSKI, Marcelo Soares; NOIJE, Wilhelmus A M Van. Estudo e Implementação de Somador com Detecção de Fim da Cálculo para Circuitos Assíncronos. 2005. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.LUBASZEWSKI, Marcelo SoaresZEFERINO, Cesar Albenes. Redes-em-Chip de Baixo Custo. 2005. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Equipamento de biotelemetria para monitoramento em tempo real do teste da caminhada de seis minutos. 2004. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Processador de Asserções para Depuração de Circuitos Integrados em Tempo de Execução. 2004. Dissertação (Mestrado em Ciências da Computação) - Universidade Federal de Minas Gerais.
CARRO, L.. Uma Arquitetura de Hardware para Estimação de Movimento Aplicada à Compressão de Vídeo Digital. 2003. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Estudo da Transformada Karhunen-Loève na Compressão de Imagens. 2003. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Modelagem e Projeto de Módulos Amplificadores e Comparadores em tecnologia CMOS 035. 2003. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Estudo do Algoritmo de Codificação de Áudio do Padrão MPEG-4AAC ( Codificador de Áudio Avançado) e Comparação entre Implementações do Módulos do Algoritmo. 2002. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Contribuição para Recofiguração Parcial, Remota e Dinâmica de FPGAs. 2002. Dissertação (Mestrado em Ciência da Computação) - Pontifícia Universidade Católica do Rio Grande do Sul.
CARRO, L.. Projeto de um Codificador/Decodoficador Viterbi Integrado. 2002. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Teste de Sistemas Integrados Utilizando Controladores Específicos. 2002. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Contribuição para Reconfiguração Parcial, Remota e Dinamica de FPGAs. 2001. Dissertação (Mestrado em Ciência da Computação) - Pontifícia Universidade Católica do Rio Grande do Sul.
CARRO, L.. Co-Simulação de Sistemas Eletrônicos Embarcados. 2000. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Localização e Leitura Automática de Caracteres Alfanuméricos-Uma aplicação da identificação de veículos. 2000. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Geração de Codigo no Projeto de Sistemas reativos a partir da Linguagem RS. 2000. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Potenciais Evocados Auditivos Baseado em Procesamento Digital de Sinais. 2000. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Desenvolvimento de Sistemas de Automação Industrial baseados em Objetos Distribuídos e no Barreamento CAN. 2000. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Reconhecimento de voz para Comandos de Direcionamento por meio de Redes Neurais. 2000. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Projeto com Matrizes de Células Lógicas Programáveis. 1999. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Uso do PLL como Decodificadr FSK para o Desenvolvimento de um Sistema de Rádio Comunicação Digital. 1999. Dissertação (Mestrado em Engenharia de Minas, Metalúrgica e de Materiais) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. . Desenvolvimento de Macrocélula Profibus Utilizando Circuitos Programáveis. 1999. Dissertação (Mestrado em Engenharia de Minas, Metalúrgica e de Materiais) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Um conjunto de Classes para Simulação Interativa Visual de Processadores no Ambiente SIMOO. 1998. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. ATGP para Testes de Circuitos Analógicos. 1997. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Projeto e Implementação da Distribuição de um Simulador Multinível. 1997. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Sistema de Aquisição e Processamento de Imagens para Inspeção por Ultra-Som. 1997. Dissertação (Mestrado em Engenharia de Minas, Metalúrgica e de Materiais) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Geração de Processdores para Aplicação Específica. 1997. Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul.
Takala, J.; Janhunen, J.; Valkama, M.;CARRO, L.. Software Defined Radio Solutions for Wireless Communications. 2018 - Technical University Tampere.
BERTELS, K. L. M.; WONG, J. S. S. M.; HUEBNER, M.; HAMDIOUI, S.; TAKALA, J. H.; TOLUN, M.; CHARBON, E.;CARRO, L. Choupani. Scalable Video Coding. 2017. Tese (Doutorado em Computer Enginnering) - Delft University of Technology.
KLIMACH, H. D.;CARRO, L; BERGMANN, C. P.. Fabricação de Transistor Orgânico de Efeito de Campo sobre Substrato Plástico Flexível. 2017. Tese (Doutorado em Programa de Pós-Graduação em Engenharia de Minas, Metalúrgica e de Materiai) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; Stephan Wong; Hubner, M.; GYVEZ, J.; KUZMANOV, G. K.. Nadeem. Adaptive, Low-Power architectures for embedded multimedia systems. 2014. Tese (Doutorado em Computer Enginnering) - Delft University of Technology.
CARRO, L.; FROHLICH, Antonio Augusto Medeiros; Barros, E.; Lima, M. E.. HdSC: modelagem de alto nivel para simulacao nativa de plataformas com suporte ao desenvolvimento de HdS. 2014. Tese (Doutorado em Pós-Graduação em Ciência da Computação) - Universidade Federal de Pernambuco.
CARRO, L.. Tecnology aware network-on-chip connectivity and synchronization design. 2011. Tese (Doutorado em Computer Enginnering) - Delft University of Technology.
CARRO, L.. Serviços de comunicação diferenciados em sistemas multiprocessados em chip baseados em redes intra-chip. 2011. Tese (Doutorado em Ciência da Computação) - Pontifícia Universidade Católica do Rio Grande do Sul.
CARRO, L.. Compression de Données de test pour architecture de systèmes integrés basée sur bus ou reséaux et réduction des coûts de test. 2010. Tese (Doutorado em systémes automatiques et micro-életroniques) - Université Montpellier 2 - Sciences et Techniques.
CARRO, L.. Efeitos da radiação em dispositivos analógicos programáveis (FPAAs) e técncias de proteção. 2010. Tese (Doutorado em Engenharia Eletrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. CODE: consciência de disponibilidade energética em nós de redes de sensores sem fio. 2010. Tese (Doutorado em Ciências da Computação) - Universidade Federal de Minas Gerais.
CARRO, L.. An aspect oriented model driven engineering approach for distributed embedded real time systems. 2009. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Técnicas Avançadas de Modelagem, Análise e Otimização de Potência em Sistemas Digitais. 2009. Tese (Doutorado em Ciência da Computação) - Universidade Estadual de Campinas.
CARRO, L.. A Cache-based hardware accelerator for memory data movements. 2008. Tese (Doutorado em Computer Enginnering) - Delft University of Technology.
CARRO, L.. Exploração do paralelismo em arquiteturas para processamento de imagens e vídeo. 2007. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Software performance estimation in MPSoC designs. 2006 - Institut Polytechnique de Grenoble.
CARRO, L.PEREIRA, Carlos Eduardo; HESSEL, Fabiano Passuelo. Co-Simulação Distribuída de Sistemas Heterogêneos. 2005. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
LIMA NETTO, Sergio;CARRO, L.. Projeto de Filtros IIR a Capacitores Chaveados em CMOS Usando Seções FIR. 2005. Tese (Doutorado em Engenharia Elétrica) - Universidade Federal do Rio de Janeiro.
CARRO, L.; SANTOS, Luiz Cláudio Villar dos; ARAÚJO, Guido Costa Souza de. T&D-Bench - Explorando o Espaço de Projeto de Processadores em Ensino e em Pesquisa. 2005. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
JOSÉ NETO, João; MELNIKOFF, Selma Shin Shimizu; ORDOEZ, Edward David Moreno; MELO, Ana Cristina Vieira de;CARRO, L.. Uma Metodologia para Projeto de Software Embarcado Baseada em Múltiplos Modelos Computacionais. 2005. Tese (Doutorado em Engenharia Elétrica) - Escola Politécnica da Universidade de São Paulo.
WAGNER, Flavio RechCARRO, L.; FRANÇA, Felipe Maia Galvão; FERNANDES, Edil Severiano Tavares. Reusando Valores em uma Arquitetura Condicional Dinâmica. 2004. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Tolerância a falhas através de escalonamento em um sistema multiprocessado. 2004. Tese (Doutorado em Ciências da Computação) - Universidade Federal de Minas Gerais.
CARRO, L.. Redes-em-Chip:Arquiteturas e Modelos para Avaliação de Área e Desempenho. 2003. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Operadores Aritméticos de baixo consumo para arquiteturas de circuitos DSP. 2002. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Co-simulação Distribuída no Suporte a Validação de Sistemas Heterogêneos. 2001. Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Reconstrução de Imagens Tomográficas baseada em Arquiteturas Reconfiguráveis. 2000. Tese (Doutorado em Engenharia Elétrica) - Universidade Federal do Rio de Janeiro.
CARRO, L.. An Algebric Aprroach to Hardware/Software Partioning. 2000. Tese (Doutorado em Ciências da Computação) - Universidade Federal de Pernambuco.
CARRO, L.. Processo de Sintese de Circuitos Lógicos Assíncronos. 2000. Tese (Doutorado em Ciência da Informação) - Universidade Federal do Rio de Janeiro.
CARRO, L.. Estimadores de Baseados em Redes de Petri para Hardware e Software Codesign. 1999. Tese (Doutorado em Ciências da Computação) - Universidade Federal de Pernambuco.
CARRO, L.. Um Controlador Microprogramavel para Comutadores ATM. 1999. Tese (Doutorado em Ciencia da Computação) - Universidade Federal da Paraíba.
CARRO, L.. Predição de erros de projeto em circuitos integrados. 2009. Exame de qualificação (Doutorando em Ciências da Computação) - Universidade Federal de Minas Gerais.
CARRO, L.. Arquitetura NoC Multi-Cluster programável e reconfigurável. 2008. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Métodos de exploração de espaço de projeto em tempo de execução em sistemas embarcados de tempo real soft baseados em redes em chip. 2007. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Estimativas e exploração do espaço de projeto baseados em modelos. 2007. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.JACOBI, R.; Renato Perez Ribas. Geração automática de células para redes eficientes a partir de BDDs. 2006. Exame de qualificação (Doutorando em Microeletrônica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.CALAZANS, NeyCOTA, Érika. Testing Network-on-Chip based systems. 2006. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.SUSIN, Altamiro Amadeu; HESSEL, Fabiano Passuelo. Software performance estiomation in MPSOC Design. 2006. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.SUSIN, Altamiro Amadeu; FLORES FILHO, Ály Ferreira. Subsídios, fundamentos em resultados de experimentos numéricos para a atualização das normas de exposição à radiação eletromagnética ocupacional e da população incluindo crianças e jovens. 2006. Exame de qualificação (Doutorando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; Claudio Geyer; Antonio Augusto de Medeiros Fröhlich. Middleware Adaptativo para Sistemas Embaracdos e de Tempo Real. 2006. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Uma Metodologia Automatizável para Conversão Síncrono-Assíncrono de Circuitos Digitais. 2005. Exame de qualificação (Doutorando em Engenharia Elétrica) - Universidade Federal do Rio de Janeiro.
WAGNER, Flávio Rech; LAGES, Walter Fetter;CARRO, L.. An event model based on directed subscriptions, events channels and gateways. (And an architecture for its implementation. 2005. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Asserções de hardware e software em SOC para verificação de IP em tempo real. 2004. Exame de qualificação (Doutorando em Ciências da Computação) - Universidade Federal de Minas Gerais.
CARRO, L.. T&D-Bench+- Um ambiente de Modelagem e Simulação de Processadores. 2003. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Uma Metodologia para Concepção de Redes de Interconexão para Sistemas Integrados. 2002. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Circuitos Mistos Reconfiguráveis para Aplicações em Sistemas Biomédicos. 2002. Exame de qualificação (Doutorando em Ciencia da Computação) - Universidade Federal da Paraíba.
CARRO, L.. Estudo sobre a aplicabilidade da Teoria de Sistemas Dinamicos Não-Lineares para o reconhecimento automático de Locutor. 2000. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Proposta de um Sistema Configurável para o desenvolvimento de aplicações de visão computacional em Tempo-Real. 2000. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Estudo de Redes Neurais Artificiais e sua Implementação em Hardware Digital através de um ambiente Codesign. 1999. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Um controlador Microprogramável para Computadores ATM. 1998. Exame de qualificação (Doutorando em Ciencia da Computação) - Universidade Federal da Paraíba.
CARRO, L.. Circuitos Mistos Reconfiguráveis para Sensores Inteligentes. 1998. Exame de qualificação (Doutorando em Ciencia da Computação) - Universidade Federal da Paraíba.
CARRO, L.. Sintese de Alto Nivel de arquiteturas reconfiguraveis. 1998. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Modulos de conversorees A/D em modo corrente para projeto de sistemas mistos de micropotencia. 1998. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.. Co-Simulação Distribuida no Suporte a validação de Sistemas Heterogeneos. 1998. Exame de qualificação (Doutorando em Computação) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; FLORES FILHO, Ály Ferreira;PEREIRA, Carlos Eduardo. Aplicação de Técnicas de Model Predictive Conrol (MPC) em Plantas Instrumentadas com Tecnologia Fieldbus. 2005. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.JUNQUEIRA, Alexandre Ambrozi; CORTES, Fernando Paixão;FABRIS, Eric Ericson. Memória Cache - Da Estimativa com a Implementação Fisica. 2005. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; BARBOSA, Carlos G; SALLES, Alvaro Augusto Almeida e;FABRIS, Eric. Medidor de Nível de Sinal para Bloosters-GSM. 2005. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; ROEHE, Eduardo Lac; REGINATTO, Romeu. Projeto de um Software Radio. 2005. Trabalho de Conclusão de Curso (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul.
CARRO, L.; Souza, C.C.; Silva, A.S.; CARVALHO, M. H.; Martins, E.;Carro, Luigi. Prof. Doutor, nivel MS-3.1. 2015. Universidade Estadual de Campinas.
CARRO, L. prof. Doutor. 2014. Universidade Estadual de Campinas.
CARRO, L; Magalhaes, L. P.; Costa, E. T.; Oliveira, J. R.; Hirakawa, A. R.. Professor Doutor, nivel MS-3.1. 2014. Universidade Estadual de Campinas.
CARRO, L.. Concurso prof adjunto: Circuitos e Sistemas Digitais. 2009. Universidade Federal de Santa Catarina.
CARRO, L. Programa Start-up Brasil. 2014. Conselho Nacional de Desenvolvimento Científico e Tecnológico.
CARRO, L. Programa Start-up Brasil. 2013. Conselho Nacional de Desenvolvimento Científico e Tecnológico.
CARRO, L.. Consultor Softex. 2005. Sociedade para Promoção da Excelência do Software Brasileiro.
CARRO, L.. Bolsa de Doutorado no Exterior. 2003. Conselho Nacional de Desenvolvimento Científico e Tecnológico.
CARRO, L.. Bolsa de Produtividade de Pesquisa. 2002. Conselho Nacional de Desenvolvimento Científico e Tecnológico.
CARRO, L.. Bolsa de Produtividade em Pesquisa. 2000. Conselho Nacional de Desenvolvimento Científico e Tecnológico.
CARRO, L.. Análise do Mérito Técnico Científico. 1999. Programa de Capacitação de Recursos Humanos Para Atividades Estratégicas.
Orientou
aceleração de metaheurísticas; Início: 2017; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul; (Orientador);
processing in memory; Início: 2017; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; (Orientador);
Improvinf the efficiency of multi-threaded processing in memory; 2022; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
PIM-gem5: a system simulator for processing-in-memory design space exploration; 2019; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Técnicas de Agrupamento de Dados para Computação Aproximativa; 2017; Dissertação (Mestrado em Pós-Graduação em Computação) - Fundação Empresa Escola de Engenharia da UFRGS,; Coorientador: Luigi Carro;
A Generic Processing in Memory Cycle Accurate Simulator under Hybrid Memory Cube Architecture; 2017; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
SoMMA ? A Software-managed Memory Architecture for Multi-issue Processors; 2017; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Reparo Dinâmico Inteligente para Sistemas Tempo Real; 2016; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Adaptive Low Power Receiver combining ADC Resolution and Digital Baseband for Wireless Sensors Networks based in IEEE 802; 15; 4 Standard; 2015; Dissertação (Mestrado em Microeletrônica) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Parallel SAT Solvers and Their Application in Automatic Parallelization; 2014; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Arquitetura Reconfigurável Multi-ISA; 2014; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
SISTEMAS MULTIPROCESSADOS EM CHIP; 2014; Dissertação (Mestrado em Microeletrônica) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Implementação e Avaliação da Técnica ACCE para Detecção e Correção de Erros de Fluxo de Controle no LLVM; 2013; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Coorientador: Luigi Carro;
Virtualizacao de hardware e exploracao da memoria de contexto em arquiteturas reconfiguraveis; 2012; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Exploração Adaptativa de Paralelismo sob Restrições Físicas e de Tempo Real em Sistemas Embarcados Tolerantes a Falhas; 2012; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Sistema de Tradução Binária de Dois Níveis para Execução Multi-ISA; 2011; Dissertação (Mestrado em Microeletrônica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Aplicação de Métricas de Software na Predição de Características Físicas de Software Embarcado; 2011; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Coorientador: Luigi Carro;
Metodologia de Projeto de Software Embarcado Voltada ao Teste; 2010; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Rede de sensores para aplicação em agricultura: um estudo de caso; 2009; Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
An approach for embedded software generation based in declarative alloy models; 2008; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Gerenciamento Automático de Recursos Reconfiguráveis Visando a Redução de Área e do Consumo de Potência em Dispositivos Embarcados; 2008; Dissertação (Mestrado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Javarray: uma arquitetura reconfigurável para o aumento de performance e economia de energia de aplicações embarcadas basedas em Java; 2006; 120 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
Conjunto de Classes para Aplicações Gráficas 2D em Sistemas Embarcados Baseados no Femtojava; 2006; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
A Java reconfigurable Architecture for energy-delay effectiveness and software compatibility in Embedded Systems; 2006; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Gerência Dinâmica de Memória em Aplicações JAVA Embarcadas; 2005; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Uma Interface para o Aumento da Faixa de Freqüências de Operação de FPAAs; 2004; Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Teste Embarcado de Conversores Analógico-Digitais; 2003; 0 f; Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
Estudo e Comparação de Métodos Digitais Utilizados na Linearização de Sensores; 2002; 0 f; Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Projeto de uma nova Arquitetura FPGA para Aplicações BIST e DSP; 2002; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
Implementação de um Sistema de Síntese de Alto-Nível baseado em Modelos Java; 2002; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
implementação de Protocolo TCP/IP para Sistemas de Instrumentação; 2002; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Uso dos CIrcuitos Elétricos Análogos para a Simulação do Comportamento Térmico das Edificações; 2002; 0 f; Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
Medidor de Massa Magra em Seres Humanos; 2001; Dissertação (Mestrado em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Projeto de aplicações específicas com microcontroladores Java dedicados; 2000; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Coorientador: Luigi Carro;
Estudo de caso de um System-on-Chip para a Validação de um Modelo de Sistemas; 2000; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Grafisma, uma ferramenta para especificação de máquinas complexas comunicantes; 1998; 0 f; Dissertação (Mestrado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Coorientador: Luigi Carro;
Processador tolerante a radiação; 2015; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Fine-Grained Error Detection Techniques for Fast Repair of FPGAs; 2013; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Exploring Hierarchy, Adaptability and 3D in NoCs for the Next Generation of MPSoCs; 2013; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Coorientador: Luigi Carro;
Quaternary CLB a falul tolerant quaternary FPGA; 2012; Tese (Doutorado em Microeletrônica) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
A Transparent and Energy Aware Reconfigurable Multiprocessor Platform for Efficient ILP and TLP Exploitation; 2012; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Arquiteturas reconfiguráveis tolerantes a falhas; 2012; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Dealing with radiation induced transient faults; 2009; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Transparent Reconfigurable Architecture for Heterogeneous Applications; 2008; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Redes-em-Chip para Sistemas Embarcados Visando a Otimização de Medidas de Qualidade de Serviço para Aplicações de Tempo Real; 2007; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Design Space Exploration of SW and HW IP based on Object Oriented Methodology for Embedded System Applications; 2007; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Strategies for Embedded Software Development Based on High-level Models; 2007; Tese (Doutorado em PPGC - Programa de Pós Graduação em Computação UFRGS) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Coorientador: Luigi Carro;
Lógica quaternária de alto desempenho e baixo consumo de potência para circuitos VLSI; 2007; Tese (Doutorado em Física) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Coorientador: Luigi Carro;
THREE DIFFERENT TECHNIQUES TO COPE WITH RADIATION EFFECTS AND COMPONENT VARIABILITY IN FUTURE TECHNOLOGIES; 2007; Tese (Doutorado em Engenharia Eletrica) - Universidade Federal do Rio Grande do Sul, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior; Orientador: Luigi Carro;
Low Cost Bist Techniques for Linear and Non-Linear Analog Circuits; 2005; 0 f; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
A Modular Digitally Programmable Interface Based on Ban-Pass Sigma-Delta Modulator for Mixed-Signal Systems-on-Chip; 2005; 0 f; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul,; Coorientador: Luigi Carro;
Digital Approach for The Design of Statiscal Analog Data Acquisition on Sols; 2005; 0 f; Tese (Doutorado em Computação) - Universidade Federal do Rio Grande do Sul,; Orientador: Luigi Carro;
Implementação do Protocolo CAN utilizando Simulink para geração automática de VHDL; 2011; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Estudo Comparativo entre a Síntese de Software Manual e Automática para Protocolos de Comunicação em Sistemas Embarcados; 2011; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Geração automática de código para agentes SNMP e CLI; 2010; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Detecção de Falhas em Processadores VLIW; 2010; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
QR Decomposition Algorithms for MIMO Systems: Impact on Computational Effort and Hardware Implementations; 2010; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
An FPGA Implementation of a Statistical Sampler Based Analog-to-Digital Converter; 2008; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Estudo e implementação de um array reconfigurável para um processador MIPS; 2007; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Topologia de Portas Lógicas Tolerantes a Falhas Externas; 2006; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Módulo USB Implemtado em Dispositivo Lógico Programável; 2005; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Sinsite - Sinalizador de localidades; 2005; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
BlueGum : Uso de interfaces Bluetooth no acesso a equipamentos portáteis; 2005; Trabalho de Conclusão de Curso; (Graduação em Engenharia de Computação) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Estágio na Phoenix Equipamentos de automação; 1999; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Digitel S; A; Indústria Eletrônica; 1999; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Comunicação de um PABX com terminais key-systems; 1999; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Implementação de circuitos mistos em CMOS; 1998; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Roteador de sinais a prova de falhas; 1998; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Instrumento de medida de potência de valor eficaz de corrente e tensão distorcida; 1998; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Modulo de consulta de cheques ao SPC; 1997; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Comparação da síntese do microcontrolador 8051 em FPGA e em circuitos semi-custom; 1997; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Estimativa de potência em circuitos CMOS combinacionais baseada em caminhos; 1997; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Módulo de comunicação para tarifação de ônibus; 1997; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Projeto Podos: medir a distância percorida por um corredor; 1997; 0 f; Trabalho de Conclusão de Curso; (Graduação em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Prototipação de circuitos analógicos em tecnologia CMOS padrão; 2000; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Implementação de Caneta ligada à Internet; 2000; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Laboratório Virtual-Real; 1999; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul; Orientador: Luigi Carro;
Modelagem processador PIC em VHDL; 1999; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Elevador comandado por voz; 1998; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
PODOS: medidor da distância percorrida por pessoa caminhando; 1998; 0 f; Iniciação Científica; (Graduando em Engenharia Elétrica) - Universidade Federal do Rio Grande do Sul, Conselho Nacional de Desenvolvimento Científico e Tecnológico; Orientador: Luigi Carro;
Protocolo de Comunicação Modibus; 2000; 0 f; Orientação de outra natureza - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Medição de Potência em FPGAs; 2000; 0 f; Orientação de outra natureza - Universidade Federal do Rio Grande do Sul; Orientador: Luigi Carro;
Produções bibliográficas
-
DE LIMA, JOÃO PAULO CARDOSO ; BRANDALERO, MARCELO ; HÜBNER, MICHAEL ; Carro, Luigi . STAP: An Architecture and Design Tool for Automata Processing on Memristor TCAMs. ACM Journal on Emerging Technologies in Computing Systems , v. 18, p. 1-22, 2022.
-
FORLIN, BRUNO E. ; SANTOS, PAULO C. ; BECKER, AUGUSTO E. ; ALVES, MARCO A.Z. ; Carro, Luigi . Sim 2 PIM: A complete simulation framework for Processing-in-Memory. JOURNAL OF SYSTEMS ARCHITECTURE , v. 128, p. 102528, 2022.
-
RODRIGUEZ CONDIA, JOSIE E. ; RECH, PAOLO ; SANTOS, FERNANDO FERNANDES DOS ; Carro, Luigi ; REORDA, MATTEO SONZA . An Effective Method to Identify Microarchitectural Vulnerabilities in GPUs. IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY , v. 22, p. 129-141, 2022.
-
DOS SANTOS, FERNANDO FERNANDES ; MALDE, SUJIT ; CAZZANIGA, CARLO ; FROST, CHRISTOPHER ; Carro, Luigi ; RECH, PAOLO . Experimental Findings on the Sources of Detected Unrecoverable Errors in GPUs. IEEE TRANSACTIONS ON NUCLEAR SCIENCE , v. 69, p. 436-443, 2022.
-
SANTOS, PAULO C. ; DE LIMA, JOÃO P. C. ; DE MOURA, RAFAEL F. ; ALVES, MARCO A. Z. ; Beck, Antonio C. S. ; Carro, Luigi . Enabling Near-Data Accelerators Adoption by Through Investigation of Datapath Solutions. INTERNATIONAL JOURNAL OF PARALLEL PROGRAMMING , v. 49, p. 237-252, 2021.
-
DOS SANTOS, FERNANDO FERNANDES ; BRANDALERO, MARCELO ; SULLIVAN, MICHAEL ; RECH JUNIOR, RUBENS LUIZ ; MARTINS BASSO, PEDRO ; HUBNER, PROF. MICHAEL ; Carro, Luigi ; RECH, PAOLO . Reduced Precision DWC: an Efficient Hardening Strategy for Mixed-Precision Architectures. IEEE TRANSACTIONS ON COMPUTERS , v. 71, p. 1-1, 2021.
-
DE LIMA, JOAO PAULO CARDOSO ; DE MOURA, RAFAEL FAO ; Carro, Luigi . Analog Memristive CAMs for Area- and Energy-Efficient Reconfigurable Computing. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS , v. 67, p. 856-860, 2020.
-
BRANDALERO, MARCELO ; Carro, Luigi ; BECK FILHO, ANTONIO CARLOS SCHNEIDER ; SHAFIQUE, MUHAMMAD . Multi-Target Adaptive Reconfigurable Acceleration for Low-Power IoT Processing. IEEE TRANSACTIONS ON COMPUTERS , v. 70, p. 1-1, 2020.
-
Jost, Tiago Trevisan ; NAZAR, GABRIEL LUCA ; Carro, Luigi . SoMMA: A software-managed memory architecture for multi-issue processors. MICROPROCESSORS AND MICROSYSTEMS , v. 77, p. 103139, 2020.
-
GONÇALVES, LARISSA ROZALES ; MOURA, RAFAEL FÃO DE ; Carro, Luigi . Aggressive Energy Reduction for Video Inference with Software-only Strategies. ACM Transactions on Embedded Computing Systems , v. 18, p. 1-20, 2019.
-
SANTOS, PAULO CESAR ; DE LIMA, JOÃO PAULO C. ; DE MOURA, RAFAEL F. ; AHMED, HAMEEZA ; ALVES, MARCO AZ ; BECK, ANTONIO CS ; Carro, Luigi . A Technologically Agnostic Framework for Cyber-Physical and IoT Processing-in-Memory-based Systems Simulation. MICROPROCESSORS AND MICROSYSTEMS , v. 69, p. 101-111, 2019.
-
BRANDALERO, MARCELO ; SOUTO, THIAGO DADALT ; Carro, Luigi ; Beck, Antonio Carlos Schneider . Predicting Performance in Multi-Core Systems with Shared Reconfigurable Accelerators. JOURNAL OF SYSTEMS ARCHITECTURE , v. 1, p. 1, 2019.
-
JORDAN, MICHAEL G. ; BRANDALERO, MARCELO ; MALFATTI, GUILHERME M. ; OLIVEIRA, GERALDO F. ; LORENZON, ARTHUR F. ; DA SILVA, BRUNO C. ; Carro, Luigi ; Rutzig, Mateus B. ; BECK, ANTONIO CARLOS S. . Data clustering for efficient approximate computing. DESIGN AUTOMATION FOR EMBEDDED SYSTEMS , v. 1, p. 1, 2019.
-
DILLENBURG, FABIANE CRISTINE ; ZANOTTO-FILHO, ALFEU ; FONSECA MOREIRA, JOSÉ CLÁUDIO ; RIBEIRO, LEILA ; Carro, Luigi . NF B pathway analysis: An approach to analyze gene co-expression networks employing feedback cycles. COMPUTATIONAL BIOLOGY AND CHEMISTRY , v. 72, p. 62-76, 2018.
-
PEREIRA-SANTOS, LEONARDO ; NAZAR, GABRIEL LUCA ; Carro, Luigi . Repair of FPGA-Based Real-Time Systems With Variable Slacks. ACM TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS , v. 23, p. 1-20, 2018.
-
FRATIN, V. ; OLIVEIRA, D. ; NAVAUX, P. ; CARRO, L. ; RECH, P. . Energy-Delay-FIT Product to compare processors and algorithm implementations. MICROELECTRONICS RELIABILITY , v. 84, p. 112-120, 2018.
-
FERNANDES DOS SANTOS, FERNANDO ; CARRO, L. ; RECH, P. . Kernel and Layer Vulnerability Factor to Evaluate Object Detection Reliability in GPUs. IET Computers and Digital Techniques , v. 1, p. 1-10, 2018.
-
SANTOS, FERNANDO FERNANDES DOS ; PIMENTA, PEDRO FOLETTO ; LUNARDI, CAIO ; DRAGHETTI, LUCAS ; Carro, Luigi ; KAELI, DAVID ; RECH, PAOLO . Analyzing and Increasing the Reliability of Convolutional Neural Networks on GPUs. IEEE TRANSACTIONS ON RELIABILITY , v. 24, p. 1-15, 2018.
-
SARTOR, ANDERSON L. ; LORENZON, ARTHUR F. ; CARRO, L. ; KASTENSMIDT, FERNANDA ; WONG, STEPHAN ; BECK, A. C. S. . Exploiting Idle Hardware to Provide Low Overhead Fault Tolerance for VLIW Processors. ACM Journal on Emerging Technologies in Computing Systems , v. 13, p. 1-21, 2017.
-
PEREIRA-SANTOS, LEONARDO ; NAZAR, GABRIEL L. ; Carro, Luigi . Exploring redundancy granularities to repair real-time FPGA-based systems. MICROPROCESSORS AND MICROSYSTEMS , v. 51, p. 264-274, 2017.
-
FERREIRA, RONALDO R. ; NAZAR, GABRIEL L. ; ROLT, JEAN DA ; Moreira, Á. F. ; CARRO, L. . Live-Out Register Fencing. ACM Transactions on Embedded Computing Systems , v. 15, p. 1-25, 2016.
-
DE BITTENCOURT PASQUALI, MATHEUS AUGUSTO ; DE RAMOS, VITOR MIRANDA ; ALBANUS, RICARDO D'OLIVEIRA ; KUNZLER, ALICE ; DE SOUZA, LUIS HENRINQUE TRENTIN ; DALMOLIN, RODRIGO JULIANI SIQUEIRA ; GELAIN, DANIEL PENS ; RIBEIRO, LEILA ; Carro, Luigi ; MOREIRA, JOSÉ CLÁUDIO FONSECA . Gene Expression Profile of NF-B, Nrf2, Glycolytic, and p53 Pathways During the SH-SY5Y Neuronal Differentiation Mediated by Retinoic Acid. Molecular Neurobiology , v. 53, p. 423-435, 2016.
-
SANTINI, THIAGO ; Carro, Luigi ; RECH WAGNER, FLAVIO ; RECH, PAOLO . Reliability Analysis of Operating Systems and Software Stack for Embedded Systems. IEEE Transactions on Nuclear Science , v. 63, p. 2225-2232, 2016.
-
FERNANDES, FERNANDO ; WEIGEL, LUCAS ; JUNG, CLAUDIO ; NAVAUX, PHILIPPE ; Carro, Luigi ; RECH, PAOLO . Evaluation of Histogram of Oriented Gradients Soft Errors Criticality for Automotive Applications. ACM Transactions on Architecture and Code Optimization , v. 13, p. 1-25, 2016.
-
FERREIRA, RICARDO ; DENVER, WALDIR ; PEREIRA, Monica Magalhães ; WONG, STEPHAN ; LISB'A, CARLOS A. ; CARRO, L. . A Dynamic Modulo Scheduling with Binary Translation: Loop optimization with software compatibility. JOURNAL OF SIGNAL PROCESSING SYSTEMS FOR SIGNAL, IMAGE, AND VIDEO TECHNOLOGY (ONLINE) , v. 85, p. 45-66, 2016.
-
CAPELLA, FERNANDA M. ; BRANDALERO, MARCELO ; CARRO, L. ; BECK, A. C. S. . A multiple-ISA reconfigurable architecture. Design Automation for Embedded Systems , v. 1, p. 1-12, 2015.
-
FERREIRA, R. S. ; ROCHA, L. ; NACIF, J. A. ; Santos, André Gustavo ; WONG, S. ; CARRO, L. . A Runtime FPGA Placement and Routing Using Low-Complexity Graph Traversal. ACM Transactions on Reconfigurable Technology and Systems , v. 8, p. 1-16, 2015.
-
PILLA, LAERCIO L. ; OLIVEIRA, DANIEL A. G. ; LUNARDI, CAIO ; Navaux, Philippe O. A. ; Carro, Luigi ; RECH, PAOLO . Memory Access Time and Input Size Effects on Parallel Processors Reliability. IEEE TRANSACTIONS ON NUCLEAR SCIENCE , v. 62, p. 2627-2634, 2015.
-
RUTZIG, MATEUS BECK ; Carro, Luigi ; Beck, Antonio Carlos Schneider . Adaptive and dynamic reconfigurable multiprocessor system to improve software productivity. IET Computers and Digital Techniques , v. 9, p. 63-72, 2015.
-
BECK, A. C. S. ; RUTZIG, MATEUS BECK ; CARRO, L. . A transparent and adaptive reconfigurable system. Microprocessors and Microsystems , v. 38, p. 509-524, 2014.
-
KASTENSMIDT, F. L. ; Azambuja, José Rodrigo ; BROWN, GUSTAVO ; CARRO, L. . Algorithm transformation methods to reduce the overhead of software-based fault tolerance techniques. Microelectronics and Reliability , v. 54, p. 1050-1055, 2014.
-
RECH, P. ; NAZAR, G. L. ; FROST, C. ; CARRO, L. . GPUs Reliability Dependence on Degree of Parallelism. IEEE Transactions on Nuclear Science , v. 61, p. 1-1, 2014.
-
PILLA, L. L. ; RECH, P. ; SILVESTRI, F. ; FROST, C. ; NAVAUX, P. O. A. ; REORDA, M. SONZA ; CARRO, L. . Software-Based Hardening Strategies for Neutron Sensitive FFT Algorithms on GPUs. IEEE Transactions on Nuclear Science , v. 60, p. 1-7, 2014.
-
RECH, P. ; FROST, C. ; CARRO, L. . GPUs Neutron Sensitivity Dependence on Data Type. Journal of Electronic Testing , v. 30, p. 307-316, 2014.
-
SABENA, D. ; SONZA REORDA, M. ; Sterpone, L. ; RECH, P. ; CARRO, L. . Evaluating the radiation sensitivity of GPGPU caches: New algorithms and experimental results. Microelectronics and Reliability , v. 30, p. 1-8, 2014.
-
NAZAR, GABRIEL LUCA ; SANTOS, LEONARDO PEREIRA ; Carro, Luigi . Fine-Grained Fast Field-Programmable Gate Array Scrubbing. IEEE Transactions on Very Large Scale Integration (VLSI) Systems (Print) , v. PP, p. 1-1, 2014.
-
STEINFELD, LEONARDO ; RITT, MARCUS ; SILVEIRA, FERNANDO ; Carro, Luigi . Optimum design of a banked memory with power management for wireless sensor networks. Wireless Networks , v. 10, p. 1, 2014.
-
ITTURIET, FÁBIO ; NAZAR, GABRIEL ; FERREIRA, RONALDO ; MOREIRA, ÁLVARO ; Carro, Luigi . Adaptive Parallelism Exploitation under Physical and Real-Time Constraints for Resilient Systems. ACM Transactions on Reconfigurable Technology and Systems , v. 7, p. 1-17, 2014.
-
RECH, P. ; AGUIAR, C. ; FROST, C. ; CARRO, L. . An Efficient and Experimentally Tuned Software-Based Hardening Strategy for Matrix Multiplication on GPUs. IEEE Transactions on Nuclear Science , v. 60, p. 1-1, 2013.
-
NAZAR, GABRIEL L. ; RECH, PAOLO ; FROST, CHRISTOPHER ; Carro, Luigi . Radiation and Fault Injection Testing of a Fine-Grained Error Detection Technique for FPGAs. IEEE Transactions on Nuclear Science , v. PP, p. 1-1, 2013.
-
CARRO, L. ; Azambuja, José Rodrigo ; NAZAR, G. ; RECH, P. ; KASTENSMIDT, F. L. ; FAIRBANKS, T. ; QUINN, H. . Evaluating Neutron Induced SEE in SRAM-Based FPGA Protected by Hardware- and Software-Based Fault Tolerant Techniques. IEEE Transactions on Nuclear Science , v. 60, p. 4243-4250, 2013.
-
FERREIRA, RONALDO RODRIGUES ; PARIZI, RAFAEL BALDIATI ; Carro, Luigi ; MOREIRA, ÁLVARO FREITAS . Compiler Optimizations Impact the Reliability of the Control-Flow of Radiation-Hardened Software. Journal of Aerospace Technology and Management (Online) , v. 5, p. 323-334, 2013.
-
RECH, PAOLO ; FAIRBANKS, THOMAS D. ; QUINN, HEATHER M. ; Carro, Luigi . Threads Distribution Effects on Graphics Processing Units Neutron Sensitivity. IEEE Transactions on Nuclear Science , v. 60, p. 4220-4225, 2013.
-
CARRO, L. ; FAJARDO JUNIOR, J. ; Rutzig, M. B. ; BECK, A. C. S. . Towards a multiple-ISA embedded system. Journal of Systems Architecture , p. -, 2012.
-
Magalhães Pereira, Monica ; Carro, Luigi . Dynamic Reconfigurable Computing: The Alternative to Homogeneous Multicores under Massive Defect Rates. International Journal of Reconfigurable Computing (Print) , v. 2011, p. 1-17, 2011.
-
Matos, Debora ; Concatto, Caroline ; Kologeski, Anelise ; Carro, Luigi ; KREUTZ, Marcio ; Kastensmidt, Fernanda ; SUSIN, Altamiro . A NOC closed-loop performance monitor and adapter. Microprocessors and Microsystems , v. 10, p. 1016, 2011.
-
Rutzig, Mateus B. ; Beck, Antonio C. S. ; Madruga, Felipe ; Alves, Marco A. ; Freitas, Henrique C. ; Maillard, Nicolas ; Navaux, Philippe O. A. ; Carro, Luigi . Boosting Parallel Applications Performance on Applying DIM Technique in a Multiprocessing Environment. International Journal of Reconfigurable Computing (Print) , v. 2011, p. 1-13, 2011.
-
Kologeski, Anelise ; Concatto, Caroline ; CONCATTO, C. ; CARRO, L. ; KASTENSMIDT, FERNANDA LIMA . Adaptive approach to tolerate multiple faulty links in Network-on-Chip. Adaptive approach to tolerate multiple faulty links in Network-on-Chip , v. 1, p. 1-1, 2011.
-
Kologeski, Anelise ; Concatto, Caroline ; CONCATTO, C. ; CARRO, L. ; KASTENSMIDT, FERNANDA LIMA . Improving Reliability in NoCs by Application-Specific Mapping Combined with Adaptive Fault-Tolerant Method in the Links. Improving Reliability in NoCs by Application-Specific Mapping Combined with Adaptive Fault-Tolerant Method in the Links , v. 1, p. 1-1, 2011.
-
Matos, Débora ; Concatto, Caroline ; KREUTZ, Márcio ; Kastensmidt, Fernanda ; Carro, Luigi ; Susin, Altamiro . Reconfigurable Routers for Low Power and High Performance. IEEE Transactions on Very Large Scale Integration (VLSI) Systems (Print) , v. 19, p. 2045-2057, 2011.
-
FERREIRA, R. S. ; Bueno, C. ; LAURE, M. ; Pereira, M. ; CARRO, L. . A Dynamic Reconfigurable Super-VLIW Architecture for a Fault Tolerant Nanoscale Design. Transactions on High-Performance Embedded Architectures and Compilers , v. 5, p. 1-18, 2011.
-
Matos, Debora ; CONCATTO, C. ; Concatto, Caroline ; Kologeski, Anelise ; CARRO, L. ; Kastensmidt, Fernanda ; Susin, Altamiro ; Kreutz, Marcio . Monitor-adapter coupling for NOC performance tuning. Monitor-adapter coupling for NOC performance tuning , v. 1, p. 193-199, 2010.
-
Huang, Kai ; Yan, Xiao-lang ; Han, Sang-il ; Chae, Soo-ik ; Jerraya, Ahmed A. ; Popovici, Katalin ; Guerin, Xavier ; BRISOLARA, Lisane ; Carro, Luigi . Gradual refinement for application-specific MPSoC design from Simulink model to RTL implementation, v. 10, p. 151-164, 2009.
-
HAN, S ; CHAE, S ; BRISOLARA, L ; CARRO, L ; POPOVICI, K ; GUERIN, X ; JERRAYA, A ; HUANG, K ; LI, L ; YAN, X . Simulink-based heterogeneous multiprocessor SoC design flow for mixed hardware/software refinement and simulation. Integration (Amsterdam) , v. 42, p. 227-245, 2009.
-
da Silva, R.C.G. ; LAZZARI, C. ; BOUDINOV, H. ; CARRO, L. . CMOS voltage-mode quaternary look-up tables for multi-valued FPGAs. Microelectronics (Luton) (Cessou em 1978. Cont. ISSN 0959-8324 Microelectronics Journal) , v. 40, p. 1466-1470, 2009.
-
Abate, F. ; STERPONE, L ; LISBÔA, Carlos Arthur Lang ; CARRO, L. ; Violante, Massimo . New Techniques for improving the performance of the lockstep architecture for SEEs mitigation in FPGA embedded processors. IEEE Transactions on Nuclear Science , v. 56, p. 1992-2000, 2009.
-
Petroli, Lorenzo ; Lisboa, Carlos Arthur Lang ; Kastensmidt, Fernanda Lima ; CARRO, L. . Majority Logic Mapping for Soft Error Dependability. Journal of Electronic Testing , v. 24, p. 83-92, 2008.
-
Rhod, Eduardo Luis ; LISBÔA, Carlos Arthur Lang ; Carro, Luigi ; Sonza Reorda, Matteo ; Violante, Massimo . Hardware and Software Transparency in the Protection of Programs Against SEUs and SETs. Journal of Electronic Testing , v. 24, p. 45-56, 2008.
-
L. Sterpone ; M. Sonza Reorda ; M. Violante ; KASTENSMIDT, Fernanda Gusmão de Lima ; CARRO, L. . Evaluating Different Solutions to Design Fault Tolerant Systems with SRAM-based FPGAs. Journal of Electronic Testing , v. 23, p. 47-54, 2007.
-
SCHÜLLER, Erik ; Erigson, M. ; CARRO, L. . Functionally Fault-tolerant DSP microprocessor using Sigma-delta Modulated Signals. Journal of Electronic Testing , v. 23, p. 275-292, 2007.
-
PEREIRA, Carlos Eduardo ; CARRO, L. . Distributed real-time embedded systems: Recent advances, future trends and their impact on manufacturing plant control. Annual Reviews in Control , v. 31, p. 81-92, 2007.
-
Franz, A. P. ; KASTENSMIDT, Fernanda Gusmão de Lima ; COTA, Érika ; CARRO, L. . Crosstalk and SEU-Aware Networks on Chip. IEEE Design and Test of Computers , v. 24, p. 340-350, 2007.
-
Sang-Il Han ; Soo-Ik Chae ; BRISOLARA, Lisane B de ; CARRO, L. ; REIS, Ricardo A da Luz ; Xavier Guerin ; Ahmed Jerraya . Memory-Efficient Multithread Code Generation from Simulink for Heterogeneous MPSOC. Design Automation for Embedded Systems , v. 11, p. 249-283, 2007.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . Reducing Test Time Using and Enhanced RF Loopback. Journal of Electronic Testing , v. 23, p. 613-623, 2007.
-
KASTENSMIDT, Fernanda Gusmão de Lima ; KINZEL FILHO, C. ; CARRO, L. . Improving Reliability of SRAM-Based FPGAs by Inserting Redundant Routing. IEEE Transactions on Nuclear Science , v. 53, p. 2060-2068, 2006.
-
SILVA, R. C. ; BOUDINOV, H. ; CARRO, L. . A Novel Voltage-Mode CMOS Quaternary Logic Design. IEEE Transactions on Electron Devices , v. 53, p. 1480-1482, 2006.
-
FLORES, Mgc ; NEGREIROS, M ; CARRO, L. ; SUZIM, A . Low Cost BIST for Static and Dynamic Testing of ADCs. Journal of Electronic Testing , v. 21, n.3, p. 283-290, 2005.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . Low Cost On-Line Testing Strategy for RF Circuits. Journal of Electronic Testing , Estados Unidos, v. 21, p. 417-427, 2005.
-
GOMES, Victor F ; BECK, Antonio Carlos S ; CARRO, L. . Trading Time and Space on Low Power Embedded Architectures with Dynamic Instruction Merging. Journal of Low Power Electronics , Estados Unidos, v. 1, n.3, p. 249-258, 2005.
-
KASTENSMIDT, Fernanda Gusmão de Lima ; NEUGERBER, Gustavo ; CARRO, L. ; REIS, Ricardo A da Luz . Desenvolvimento de Técnicas de Tolerância a Falhas para Componentes Programáveis por SRAM. Revista de Informática Teórica e Aplicada , v. 11, p. 47-60, 2005.
-
WAGNER, Flávio ; CESÁRIO, W O ; CARRO, L. ; A, Jerraya . Strategies for The Integration of Hardware and Software IP Components in Embedded Systems-on-Chip. Integration (Amsterdam) , v. 37, n.4, p. 223-252, 2004.
-
COTA, Érika ; Carro, Luigi ; LUBASZEWSKI, Marcelo . Reusing an on-chip network for the test of core-based systems. ACM Transactions on Design Automation of Electronic Systems , v. 9, n.4, p. 471-499, 2004.
-
FLORES, Mgc ; NEGREIROS, M ; CARRO, L. ; SUZIM, A A . A Noise Generator for Embedded Circuits Testing. JICS. Journal of Integrated Circuits and Systems , v. 1, n.1, p. 38-43, 2004.
-
FLORES, M G C ; NEGREIROS, M ; CARRO, L. ; SUZIM, A A . INL and DNL Estimation Based on Noise ADC test. IEEE Transactions on Instrumentation and Measurement , 2004.
-
GONSALES, A D ; CARRO, L. ; LUBASZEWSKI, M ; RENOVELL, M . A New FPGA for DSP Applications Integrating BIST Capabilities. Journal of Electronic Testing , v. 20, n.4, p. 423-431, 2004.
-
COTA, e ; CARRO, L. ; ORAILOGLU, A ; LUBASZEWSKI, M . Searching for Global Test Costs Optimization in Core-based Systems. Journal of Electronic Testing , v. 20, n.4, p. 357-373, 2004.
-
KASTENSMIDT, F G ; HENTSCHKE, R ; CARRO, L. ; REIS, R . Designing Fault-tolerant Techniques for SRAM-based FPGAs. IEEE Design and Test of Computers , v. 21, n.6, p. 552-562, 2004.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . Testing Analog Circuits Using Spectral Analysis. Microelectronics Journal , v. 34, p. 937-944, 2003.
-
CASSOL, Leandro ; BETTA, O ; CARRO, L. ; LUBASZEWSKI, Marcelo . The Sigma-Delta BIST Method Applied to Linear Analog Circuits. Journal of Electronic Testing , v. 19, p. 13-20, 2003.
-
CARRO, L. ; NEGREIROS, Marcelo ; JAHN, G ; SOUZA JUNIOR, Adão de ; FRANCO, D . Circuit-Level Considerations for Mixed-Signals Programmable Components. IEEE Design and Test of Computers , Estados Unidos, v. 20, n.1, p. 76-84, 2003.
-
NEUBERGER, Gustavo ; de Lima, Fernanda ; Carro, Luigi ; REIS, Ricardo . A multiple bit upset tolerant SRAM memory. ACM Transactions on Design Automation of Electronic Systems , v. 8, p. 577-590, 2003.
-
NEGREIROS, M ; CARRO, L ; SUSIN, Altamiro . A statistical sampler for a new on-line analog test method. Journal of Electronic Testing , v. 19, p. 585-595, 2003.
-
NACUL, Andre ; CARRO, L. ; LUBASZEWSKI, Marcelo . Testing of RF mixers with adaptive filters. Microelectronics Journal , Estados Unidos, v. 33, n.10, p. 847-853, 2002.
-
Ito, S.A. ; CARRO, L. ; Jacobi, R.P. . Making Java work for microcontroller applications. IEEE Design and Test of Computers , Estados Unidos, v. 18, p. 100-110, 2001.
-
COTA, Érika ; LIMA, F. G. ; REZGUI, S. ; CARRO, L. ; VELAZCO, R. ; LUBASZEWSKI, Marcelo ; REIS, Ricardo . Synthesis of an 8051-like Micro-controller Tolerant to Transient Faults. Journal of Electronic Testing , Estados Unidos, v. 17, n.2, p. 149-161, 2001.
-
COTA, Érika ; NEGREIROS, Marcelo ; CARRO, L. ; LUBASZEWSKI, Marcelo . A New Adaptive Analog test and Diagnosis System. IEEE Transactions on Instrumentation and Measurement , v. 49, n.2, p. 223-227, 2000.
-
ALBA, C. ; CARRO, L. ; SUZIM, A. . Clasificación y Comparación de sistemas de disegno de circuitos integrados. Información Tecnológica , Chile, v. 8, n.5, 1997.
-
CARRO, L. ; MARCON, C.A. ; SUZIM, A.A. ; SUSIN, A. A. . SHC-SLX: A levelized compiled, event driven interpreted VLSI simulator. Microprocessing and Microprogramming , v. 38, p. 503-509, 1993.
-
Beck, Antonio Carlos Schneider (Org.) ; Lang Lisbôa, Carlos Arthur (Org.) ; Carro, Luigi (Org.) . Adaptable Embedded Systems. 1. ed. Springer New York, 2013.
-
BECK, Antonio Carlos S ; CARRO, L. . Dynamic Reconfigurable Architectures and Transparent Optimization Techniques. 1. ed. Heidelberg: Springer, 2010. v. 1. 225p .
-
KASTENSMIDT, Fernanda Gusmão de Lima ; CARRO, L. ; REIS, Ricardo A da Luz . Fault-Tolerance Techniques for SRAM-based FPGAs. 1. ed. Dordrecht: Springer, 2006. v. 1. 183p .
-
CARRO, L. . Projeto de Prototipação de Sistemas Digitais. Porto Alegre: Editora da UFRGS, 2001. 234p .
-
SOUZA, JECKSON DELLAGOSTIN ; SARTOR, ANDERSON L. ; Carro, Luigi ; RUTZIG, MATEUS BECK ; WONG, STEPHAN ; Beck, Antonio C. S. . DIM-VEX: Exploiting Design Time Configurability and Runtime Reconfigurability. Lecture Notes in Computer Science. 1ed.: Springer International Publishing, 2018, v. , p. 367-378.
-
Exenberger Becker, Pedro H. ; SARTOR, ANDERSON L. ; BRANDALERO, MARCELO ; Jost, Tiago Trevisan ; WONG, STEPHAN ; Carro, Luigi ; Beck, Antonio C. . ALow-CostBRAM-BasedFunction ReuseforConfigurableSoft-Core ProcessorsinFPGAs. Lecture Notes in Computer Science. 1ed.: Springer International Publishing, 2018, v. , p. 499-510.
-
RECH, PAOLO ; Oliveira, Daniel ; NAVAUX, PHILIPPE ; Carro, Luigi . Soft-Error Effects on Graphics Processing Units. FPGAs and Parallel Architectures for Aerospace Applications. 1ed.: Springer International Publishing, 2016, v. , p. 309-325.
-
SANTOS, LEONARDO P. ; NAZAR, GABRIEL L. ; Carro, Luigi . Low Cost Dynamic Scrubbing for Real-Time Systems. Lecture Notes in Computer Science. 1ed.: Springer International Publishing, 2016, v. , p. 144-156.
-
Nazarian, Ghazaleh ; Carro, Luigi ; Gaydadjiev, Georgi N. . Towards Code Safety with High Performance. Lecture Notes in Computer Science. 1ed.: Springer International Publishing, 2014, v. , p. 209-220.
-
Rutzig, M. B. ; BECK, Antonio Carlos S ; CARRO, L . Heterogeneous Behavior of Applications and Systems. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 13-39.
-
Beck, Antonio C. S. ; Lisboa, C. A. ; CARRO, L ; NAZAR, G. L. ; PEREIRA, M. M. ; FERREIRA, R. R. . Adaptability: The Key for Future Embedded Systems. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 1-11.
-
NAZAR, G. L. ; CARRO, L . Reconfigurable Systems. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 95-117.
-
Matos, D. ; Concatto, Caroline ; CARRO, L . Recongurable Intercommunication Infrastructure: NoCs. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 119-161.
-
PEREIRA, M. M. ; RHOD, Eduardo ; CARRO, L . Fault Tolerant Design and Adaptability. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 211-241.
-
FERREIRA, R. R. ; CARRO, L . Adaptive Software. In: Antonio Carlos Schneider Beck Filho, Carlos Arthur Lang Lisbôa and Luigi Carro. (Org.). Adaptable Embedded Systems. 1ed.New York: Springer New York, 2013, v. 1, p. 279-303.
-
Parizi, Rafael B. ; FERREIRA, RONALDO R. ; Carro, Luigi ; Moreira, Álvaro F. . Compiler Optimizations Do Impact the Reliability of Control-Flow Radiation Hardened Embedded Software. IFIP Advances in Information and Communication Technology. 1ed.: Springer Berlin Heidelberg, 2013, v. , p. 49-60.
-
Matos, Debora ; REINBRECHT, CEZAR ; Kreutz, Marcio ; PALERMO, GIANLUCA ; Carro, Luigi ; Susin, Altamiro . Hierarchical and Multiple Switching NoC with Floorplan Based Adaptability. Lecture Notes in Computer Science. 77ed.: Springer Berlin Heidelberg, 2013, v. , p. 179-184.
-
Stephan Wong ; CARRO, L. ; Rutzig, Mateus B. ; Matos, Debora ; Giorgi, R. ; Puzovic, N. ; Kaxiras, S. ; Cintra, M. ; Desoli, G. ; Gai, P. ; McKee, S. A. ; Zaks, A. . ERA - Embedded Reconfigurable Architectures. In: João Cardoso; Michel Hubner. (Org.). Reconfigurable Computing: from FPGAs to Hardware/Software Codesign. New York: Springer, 2011, v. 1, p. 239-259.
-
Rutzig, M. B. ; CARRO, L. . Multi-Core System on Chip. In: S. S. Bhattacharyya; E. F. Deptrttere; R, Leupers; J. Takala.. (Org.). Handbook of Signal Processing Systems. New York: Springer, 2010, v. 1, p. 485-514.
-
FERREIRA, R. ; BRISOLARA, Lisane ; SPECHT, Emilena ; MATTOS, Júlio C B ; COTA, Erika F ; CARRO, L . Engineering Embedded Software: from application modeling to software synthesis. In: Luis Gomes; Joao M. Fernandes. (Org.). Behavioral Modeling for Embedded Systems and Technologies: Applications for Design and Implementation. 1ed.Hershey, Pensilvania: IGI Global, 2009, v. 1, p. 245-271.
-
BRISOLARA, Lisane B de ; KREUTZ, Márcio ; CARRO, L. . UML as front-end language for embedded systems design. In: Luis Gomes; Joao M. Fernandes. (Org.). Behavioral Modeling for Embedded Systems and Technologies: Applications for Design and Implementation. 1ed.Hershey, Pensilvania: IGI Global, 2009, v. 1, p. 1-23.
-
WAGNER, Flavio Rech ; CARRO, L. . Metodologias e Técnicas de Engenharia de Software para Sistemas Embarcados. In: André C.P.L.F. de Carvalho, Tomasz Kowaltowski. (Org.). Atualizações em Informática 2009. 1ed.Rio de Janeiro: Editora PUC Rio, 2009, v. 1, p. 153-229.
-
LUBASZEWSKI, Marcelo Soares ; Balen, T. ; E, Schuler ; CARRO, L. ; Jose Luis Huertas . Effects of Radiation on Analog and Mixed-Signal Circuits. In: Raoul Velazco, Pascal Fouillat, Ricardo Reis. (Org.). Radaition Effects on Embedded Systems. 1ed.Boston: Springer, 2007, v. 1, p. 89-119.
-
BECK, Antonio Carlos S ; CARRO, L. . Low Power Java Processor for Embedded Applications. In: Glesner,M.; Reis, R.; Indrusiak, L.; Eveking, H.. (Org.). VLSI-SOC: From Systems to Chips. 1ed.Boston: Springer, 2006, v. 1, p. 213-228.
-
MARTIN, G ; MULLER, W ; BRISOLARA, L ; BECKER, L ; CARRO, L. ; WAGNER, F ; PEREIRA, Carlos Eduaro . A comparison between UML and Function Blocks for Heterogeneous SoC Design and ASIP Generation. In: Grant Martin e Wolfgang Muller. (Org.). UML for SoC Design. 1ed.Dordrecht: Netherlands, 2005, v. 1, p. 199-222.
-
CARRO, L. ; WAGNER, Flavio . Capítulo 2 das Jornadas de Atualização em Informática. In: XXII JAI 2003. (Org.). Sistemas Computacionais Embarcados. Campinas: Sociedade Brasileira de Computação, 2003, v. 1, p. 45-94.
-
CARRO, L. . Projeto de Sistemas em Silício Usando Núcleos. In: Antonio Garcia Rozo; Ricardo Reis. (Org.). Sistemas Digitales - Metodologias de Diseo VLSI. Bogotá: Ediciones Uniandes, 2003, v. 1, p. 153-158.
-
CARRO, L. ; NACUL, Andre ; JANNER, Daniel ; LUBASZEWSKI, Marcelo . Built-in test of analog non-linear circuits in a SOC environment. In: Michel Robert; Bruno Rouzeyre; Christian Piguet; Marie-Lise Flottes. (Org.). SOC Design Methodologies. Londres: Kluwer Academic Publishers, 2002, v. , p. 437-448.
-
CARRO, L. . Memórias Embarcadas. In: Ricardo Reis; Marcelo Macarthy. (Org.). EMICRO 99, I Escola de Microeletrônica da SBC-Sul. Pelotas: Sociedade Brasileira de Computação, 1999, v. 1, p. 201-210.
-
CARRO, L. . 2. Sistemas de Aplicação Específica. In: Ricardo Reis; Marcello Macarthy. (Org.). EMICRO 99, I Escola de Microeletrônica da SBC-Sul. Pelotas: Sociedade Brasileira de Computação, 1999, v. , p. 241-264.
-
CARRO, L. ; JOHANN, M. ; KINDEL, M. ; GONÇALVES, P. ; LIMA, A. ; MIGLIORIN, G. ; NARDI, G. ; MORAES, Fernando ; REIS, Ricardo ; JACOBI, R. ; SUZIM, A. . Ambiente Ágata de Projeto. EGATEA - Revista da Escola de Engenharia, Porto Alegre, , v. 25, p. 21 - 30, 01 jan. 1997.
-
CARRO, L. ; LIMA, A. ; POISL, R. ; SCHUMACHER, M. I. . Técnicas de apoio ao ensino de Eletrônica Fundamental. EGATEA - revista da Escola de Engenharia, Porto Alegre, , v. 25, p. 79 - 88, 01 jan. 1997.
-
DE LIMA, JOAO PAULO C. ; Carro, Luigi . Quantization-Aware In-situ Training for Reliable and Accurate Edge AI. In: 2022 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2022, Antwerp. 2022 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2022. v. 1. p. 1497-1502.
-
SANTOS, PAULO C. ; FORLIN, BRUNO E. ; Carro, Luigi . Providing Plug N' Play for Processing-in-Memory Accelerators. In: ASPDAC '21: 26th Asia and South Pacific Design Automation Conference, 2021, Tokyo Japan. Proceedings of the 26th Asia and South Pacific Design Automation Conference, 2021. v. 1. p. 651-656.
-
SANTOS, PAULO C. ; FORLIN, BRUNO E. ; Carro, Luigi . Sim2PIM: A Fast Method for Simulating Host Independent & PIM Agnostic Designs. In: 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2021, Grenoble. 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2021. v. 1. p. 226-231.
-
SANTOS, FERNANDO F. DOS ; CONDIA, JOSIE E. RODRIGUEZ ; Carro, Luigi ; REORDA, MATTEO SONZA ; RECH, PAOLO . Revealing GPUs Vulnerabilities by Combining Register-Transfer and Software-Level Fault Injection. In: 2021 51st Annual IEEE/IFIP International Conference on Dependable Systems and Networks (DSN), 2021, Taipei. 2021 51st Annual IEEE/IFIP International Conference on Dependable Systems and Networks (DSN), 2021. v. 1. p. 292-304.
-
SANTOS, FERNANDO FERNANDES DOS ; HARI, SIVA KUMAR SASTRY ; BASSO, PEDRO MARTINS ; Carro, Luigi ; RECH, PAOLO . Demystifying GPU Reliability: Comparing and Combining Beam Experiments, Fault Simulation, and Profiling. In: 2021 IEEE International Parallel and Distributed Processing Symposium (IPDPS), 2021, Portland. 2021 IEEE International Parallel and Distributed Processing Symposium (IPDPS), 2021. v. 1. p. 289-298.
-
CORDEIRO, ALINE S. ; SANTOS, SAIRO R. DOS ; MOREIRA, FRANCIS B. ; SANTOS, PAULO C. ; Carro, Luigi ; ALVES, MARCO A. Z. . Machine Learning Migration for Efficient Near-Data Processing. In: 2021 29th Euromicro International Conference on Parallel, Distributed and NetworkBased Processing (PDP), 2021, Valladolid. 2021 29th Euromicro International Conference on Parallel, Distributed and Network-Based Processing (PDP), 2021. v. 1. p. 212-219.
-
FORLIN, BRUNO ; HUSEMANN, RONALDO ; Carro, Luigi ; REINBRECHT, CEZAR ; HAMDIOUI, SAID ; TAOUIL, MOTTAQIALLAH . G-PUF: An Intrinsic PUF Based on GPU Error Signatures. In: 2020 IEEE European Test Symposium (ETS), 2020, Tallinn. 2020 IEEE European Test Symposium (ETS), 2020. v. 1. p. 1.
-
CARDOSO DE LIMA, JOAO PAULO ; BRANDALERO, MARCELO ; Carro, Luigi . Endurance-Aware RRAM-Based Reconfigurable Architecture using TCAM Arrays. In: 2020 30th International Conference on FieldProgrammable Logic and Applications (FPL), 2020, Gothenburg. 2020 30th International Conference on Field-Programmable Logic and Applications (FPL), 2020. v. 1. p. 40-46.
-
AHMED, HAMEEZA ; SANTOS, PAULO C. ; LIMA, JOAO P. C. ; MOURA, RAFAEL F. ; ALVES, MARCO A. Z. ; Beck, Antonio C. S. ; Carro, Luigi . A Compiler for Automatic Selection of Suitable Processing-in-Memory Instructions. In: 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2019, Florence. 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2019. p. 564.
-
BRANDALERO, MARCELO ; SHAFIQUE, MUHAMMAD ; Carro, Luigi ; Beck, Antonio Carlos Schneider . TransRec: Improving Adaptability in Single-ISA Heterogeneous Systems with Transparent and Reconfigurable Acceleration. In: 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2019, Florence. 2019 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2019. p. 582.
-
SANTOS, PAULO C. ; OLIVEIRA, GERALDO F. ; LIMA, JOAO P. ; ALVES, MARCO A. Z. ; Carro, Luigi ; Beck, Antonio C. S. . Processing in 3D memories to speed up operations on complex data structures. In: 2018 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2018, Dresden. 2018 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2018. p. 897.
-
TOME, DIEGO G. ; SANTOS, PAULO C. ; Carro, Luigi ; ALMEIDA, EDUARDO C. ; ALVES, MARCO A. Z. . HIPE: HMC instruction predication extension applied on database processing. In: 2018 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2018, Dresden. 2018 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2018. p. 261.
-
DE LIMA, JOÃO PAULO C. ; SANTOS, PAULO CESAR ; ALVES, MARCO A. Z. ; Beck, Antonio C. S. ; Carro, Luigi . Design space exploration for PIM architectures in 3D-stacked memories. In: the 15th ACM International Conference, 2018, Ischia. Proceedings of the 15th ACM International Conference on Computing Frontiers - CF '18, 2018. p. 113.
-
BRANDALERO, MARCELO ; Carro, Luigi ; BECK, ANTONIO CARLOS S. ; SHAFIQUE, MUHAMMAD . Approximate on-the-fly coarse-grained reconfigurable acceleration for general-purpose applications. In: the 55th Annual Design Automation Conference, 2018, San Francisco. Proceedings of the 55th Annual Design Automation Conference on - DAC '18. New York: ACM Press, 2018. p. 1.
-
OLIVEIRA, GERALDO F. ; GONCALVES, LARISSA ROZALES ; BRANDALERO, MARCELO ; BECK, ANTONIO CARLOS S. ; Carro, Luigi . Employing Classification-based Algorithms for General-Purpose Approximate Computing. In: 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC), 2018, San Francisco. 2018 55th ACM/ESDA/IEEE Design Automation Conference (DAC), 2018. p. 1.
-
SANTOS, PAULO CESAR ; DE LIMA, JOÃO PAULO C. ; DE MOURA, RAFAEL F. ; AHMED, HAMEEZA ; ALVES, MARCO A. Z. ; Beck, Antonio C. S. ; Carro, Luigi . Exploring IoT platform with technologically agnostic processing-in-memory framework. In: the Workshop, 2018, Turin. Proceedings of the Workshop on INTelligent Embedded Systems Architectures and Applications - INTESA '18, 2018. p. 1.
-
JOST, TIAGO ; NAZAR, GABRIEL ; Carro, Luigi . An energy-efficient memory hierarchy for multi-issue processors. In: 2017 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2017, Lausanne. Design, Automation & Test in Europe Conference & Exhibition (DATE), 2017, 2017. p. 368.
-
SANTOS, PAULO C. ; OLIVEIRA, GERALDO F. ; TOME, DIEGO G. ; ALVES, MARCO A. Z. ; ALMEIDA, EDUARDO C. ; Carro, Luigi . Operand size reconfiguration for big data processing in memory. In: 2017 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2017, Lausanne. Design, Automation & Test in Europe Conference & Exhibition (DATE), 2017, 2017. p. 710.
-
OLIVEIRA, DANIEL ALFONSO GONCALVES DE ; PILLA, LAERCIO LIMA ; HANZICH, MAURICIO ; FRATIN, VINICIUS ; FERNANDES, FERNANDO ; LUNARDI, CAIO ; CELA, JOSE MARIA ; NAVAUX, PHILIPPE OLIVIER ALEXANDRE ; Carro, Luigi ; RECH, PAOLO . Radiation-Induced Error Criticality in Modern HPC Parallel Accelerators. In: 2017 IEEE International Symposium on High Performance Computer Architecture (HPCA), 2017, Austin. 2017 IEEE International Symposium on High Performance Computer Architecture (HPCA), 2017. p. 577.
-
SANTOS, FERNANDO FERNANDES DOS ; DRAGHETTI, LUCAS ; WEIGEL, LUCAS ; Carro, Luigi ; NAVAUX, PHILIPPE ; RECH, PAOLO . Evaluation and Mitigation of Soft-Errors in Neural Network-Based Object Detection in Three GPU Architectures. In: 2017 47th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshop (DSNW), 2017, Denver. 2017 47th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops (DSN-W), 2017. p. 169.
-
SANTOS, PAULO C. ; ALVES, MARCO A. Z. ; DIENER, MATTHIAS ; Carro, Luigi ; Navaux, Philippe O. A. . Exploring Cache Size and Core Count Tradeoffs in Systems with Reduced Memory Access Latency. In: 2016 24th Euromicro International Conference on Parallel, Distributed, and NetworkBased Processing (PDP), 2016, Heraklion. 2016 24th Euromicro International Conference on Parallel, Distributed, and Network-Based Processing (PDP), 2016. p. 388.
-
DELLAGOSTIN SOUZA, JECKSON ; Carro, Luigi ; BECK RUTZIG, MATEUS ; SCHNEIDER BECK, ANTONIO CARLOS . A Reconfigurable Heterogeneous Multicore with a Homogeneous ISA. In: Proceedings of the 2016 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2016. Proceedings of the 2016 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2016. v. 1. p. 1598.
-
MOURA, RAFAEL FAO DE ; SOUZA, JECKSON DELLAGOSTIN ; Carro, Luigi ; Beck, Antonio Carlos Schneider ; RUTZIG, MATEUS BECK . The Impact of Heterogeneity on a Reconfigurable Multicore System. In: 2016 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016, Pittsburgh. 2016 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016. p. 701.
-
GIRALDO, JUAN S. P. ; Carro, Luigi ; WONG, STEPHAN ; Beck, Antonio C. S. . Leveraging Compiler Support on VLIW Processors for Efficient Power Gating. In: 2016 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016, Pittsburgh. 2016 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2016. p. 502.
-
ALVES, MARCO A. Z. ; SANTOS, PAULO C. ; MOREIRA, FRANCIS B. ; DIENER, MATTHIAS ; Carro, Luigi . Saving memory movements through vector processing in the DRAM. In: 2015 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2015, Amsterdam. 2015 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2015. p. 117.
-
ALVES, MARCO A. Z. ; SANTOS, PAULO C. ; DIENER, MATTHIAS ; Carro, Luigi . Reconfigurable Vector Extensions inside the DRAM. In: 2015 10th International Symposium on Reconfigurable Communicationcentric SystemsonChip (ReCoSoC), 2015, Bremen. 2015 10th International Symposium on Reconfigurable Communication-centric Systems-on-Chip (ReCoSoC), 2015. p. 1.
-
ALVES, MARCO A. Z. ; SANTOS, PAULO C. ; DIENER, MATTHIAS ; Carro, Luigi . Opportunities and Challenges of Performing Vector Operations inside the DRAM. In: the 2015 International Symposium, 2015, Washington DC. Proceedings of the 2015 International Symposium on Memory Systems - MEMSYS '15, 2015. p. 22.
-
FERREIRA, RONALDO R. ; SANCHEZ, ERNESTO ; ROLT, JEAN DA ; NAZAR, GABRIE L. ; MOREIRA, ALVARO F. ; Carro, Luigi ; REORDA, MATTEO SONZA . Permanent fault detection and diagnosis in the lightweight dual modular redundancy architecture. In: 2015 16th LatinAmerican Test Symposium (LATS), 2015, Puerto Vallarta. 2015 16th Latin-American Test Symposium (LATS), 2015. p. 1.
-
SARTOR, ANDERSON L. ; LORENZON, ARTHUR F. ; Carro, Luigi ; KASTENSMIDT, FERNANDA ; WONG, STEPHAN ; Beck, Antonio C. S. . A Novel Phase-Based Low Overhead Fault Tolerance Approach for VLIW Processors. In: 2015 IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2015, Montpellier. 2015 IEEE Computer Society Annual Symposium on VLSI, 2015. p. 485.
-
DE OLIVEIRA, DANIEL ALFONSO GONÇALVES ; PILLA, LAÉRCIO ; LUNARDI, CAIO ; Carro, Luigi ; NAVAUX, PHILIPPE O.A. ; RECH, PAOLO . The Path to Exascale. In: the 5th Workshop, 2015, Portland. Proceedings of the 5th Workshop on Fault Tolerance for HPC at eXtreme Scale - FTXS '15, 2015. p. 55.
-
RODRIGUES, DIEGO ; Nazarian, Ghazaleh ; MOREIRA, ALVARO ; Carro, Luigi ; GAYDADJIEV, GEORGI . A non-conservative software-based approach for detecting illegal CFEs caused by transient faults. In: 2015 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS), 2015, Amherst. 2015 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFTS), 2015. p. 221.
-
VIEIRA, ANDRWS ; FAUSTINI, PEDRO ; Carro, Luigi ; COTA, Érika . NFRs Early Estimation Through Software Metrics. In: Design, Automation and Test in Europe, 2015, Grenoble. Design, Automation & Test in Europe Conference & Exhibition (DATE), 2015, 2015. p. 329.
-
TIWARI, DEVESH ; GUPTA, SAURABH ; ROGERS, JAMES ; MAXWELL, DON ; RECH, PAOLO ; VAZHKUDAI, SUDHARSHAN ; Oliveira, Daniel ; LONDO, DAVE ; DEBARDELEBEN, NATHAN ; NAVAUX, PHILIPPE ; Carro, Luigi ; BLAND, ARTHUR . Understanding GPU errors on large-scale HPC systems and the implications for system design and operation. In: 2015 IEEE 21st International Symposium on High Performance Computer Architecture (HPCA), 2015, Burlingame. 2015 IEEE 21st International Symposium on High Performance Computer Architecture (HPCA), 2015. p. 331.
-
SANTINI, THIAGO ; RECH, PAOLO ; Carro, Luigi ; WAGNER, Flavio Rech . Exploiting cache conflicts to reduce radiation sensitivity of operating systems on embedded systems. In: 2015 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2015, Amsterdam. 2015 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2015. p. 49.
-
SANTINI, THIAGO ; RECH, PAOLO ; NAZAR, GABRIEL ; Carro, Luigi ; WAGNER, Flavio Rech . Reducing embedded software radiation-induced failures through cache memories. In: 2014 19th IEEE European Test Symposium (ETS), 2014, Paderborn. 2014 19th IEEE European Test Symposium (ETS), 2014. p. 1.
-
DE CARVALHO, M. ; SABENA, D. ; REORDA, M. SONZA ; Sterpone, L. ; RECH, P. ; CARRO, L. . Fault injection in GPGPU cores to validate and debug robust parallel applications. In: 2014 IEEE 20th International OnLine Testing Symposium (IOLTS), 2014, Platja d'Aro. 2014 IEEE 20th International On-Line Testing Symposium (IOLTS), 2014. p. 210.
-
Matos, Debora ; Kreutz, Marcio ; REINBRECHT, CEZAR ; Carro, Luigi ; Susin, Altamiro . Adaptive multiple switching strategy toward an ideal NoC. In: 2014 IEEE International Symposium on Circuits and Systems (ISCAS), 2014, Melbourne VIC. 2014 IEEE International Symposium on Circuits and Systems (ISCAS), 2014. p. 1014.
-
M. Sonza Reorda ; RECH, P. ; Carro, Luigi . GPGPUs: how to combine high computational power with high reliability. In: DATE - Design Automation and Test in Europe, 2014, Grenoble. DATE '14 Proceedings of the Conference on Design, Automation and Test in Europe. Los Alamitos: IEEE, 2014. p. 1-8.
-
RECH, PAOLO ; Pilla, L. ; NAVAUX, P. O. A. ; CARRO, L . Impact of GPUs Parallelism Management on Safety - Critical and HPC Applications Reliability. In: Dependable Systemas and Networks, 2014, Atlanta, GA. DSN 2014, 2014.
-
FERREIRA, R. R. ; Nazar, G. ; MOREIRA, A. F. ; CARRO, L . Adaptive Low - Power Architecture for High - Performance and Reliable Embedded Computing. In: Dependable Systems and Networks, 2014, Atlanta, GA. DSN 2014, 2014.
-
Cassel, M. ; CARRO, L . An Adaptive Low-Power Receiver Architecture for IEEE 802.15.4 Standard. In: IMTC 2014, 2014, Montevideo. Internation Measurement and Test Conference, 2014.
-
RECH, P. ; AGUIAR, C. Z. ; FROST, C. ; CARRO, L . Neutron Sensitivity of Integer and Floating Point Operations executed in GPUs. In: Latin American Test Workshop, 2013, Cordoba. Proceedings, 2013.
-
RECH, P. ; CARRO, L . Experimental Evaluation of Neutron-Induced Effects in Graphic Processing Units. In: 9th Workshop on Silicon Errors in Logic - System Effects, 2013, Stanford. Digest of Papers, 2013.
-
Matos, D. ; REINBRECHT, C. ; KREUTZ, M e ; PALERMO, G. ; Susin, Altamiro A. ; CARRO, L . Hierarchical and Multiple Switching NoC with Floorplan based Adaptability. In: International Symposium on Applied Reconfigurable Computing, 2013, Los Angeles. Lecture Notes in Computer Science, 2013.
-
FRANTZ, F. ; Matos, D. ; LABRAK, L. ; CLERMIDY, F. ; O?CONNOR, I. ; CARRO, L ; Susin, Altamiro A. . MoNICA: Performance- and Thermal-Aware Floorplan for Heterogeneous 3D NoC-based MPSoCs. In: Workshop on 3D Integration ? Applications, Techonology, Architecture, Design, Automation and Test, 2013, Grenoble. Digest of Papers, 2013.
-
Rutzig, M. B. ; BECK, Antonio Carlos S ; CARRO, L. . A transparent and energy aware reconfigurable multiprocessor platform for simultaneous ILP and TLP exploitation. In: DATE - Design Automation and Test in Europe, 2013, Dresden. DATE 2013 Proceedings of the Conference on Design, Automation and Test in Europe. Los Alamitos: IEEE, 2013. p. 1559-1564.
-
STEINFELD, LEONARDO ; SILVEIRA, FERNANDO ; RITT, MARCUS ; Carro, Luigi . A New Memory Banking System for Energy-Efficient Wireless Sensor Networks. In: 2013 IEEE International Conference on Distributed Computing in Sensor Systems (DCOSS), 2013, Cambridge. 2013 IEEE International Conference on Distributed Computing in Sensor Systems, 2013. p. 215.
-
NAZAR, GABRIEL L. ; SANTOS, LEONARDO P. ; Carro, Luigi . Accelerated FPGA repair through shifted scrubbing. In: 2013 23rd International Conference on Field Programmable Logic and Applications (FPL), 2013, Porto. 2013 23rd International Conference on Field programmable Logic and Applications, 2013. p. 1.
-
FERREIRA, R. ; ROCHA, L. ; SANTOS, A. ; NACIF, J. ; WONG, STEPHAN ; Carro, Luigi . A run-time graph-based Polynomial Placement and routing algorithm for virtual FPGAS. In: 2013 23rd International Conference on Field Programmable Logic and Applications (FPL), 2013, Porto. 2013 23rd International Conference on Field programmable Logic and Applications, 2013. p. 1.
-
NAZAR, GABRIEL L. ; SANTOS, LEONARDO P. ; Carro, Luigi . Scrubbing unit repositioning for fast error repair in FPGAs. In: 2013 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2013, Montreal. 2013 International Conference on Compilers, Architecture and Synthesis for Embedded Systems (CASES), 2013. p. 1.
-
CARRO, L ; NAZAR, G. L. . Fast error detection through efficient use of hardwired resources in FPGAs. In: 17th IEEE European Test Symposium (ETS), 2012, Annecy. Proceedings. Los Alamitos: IEEE Computer Society, 2012. v. 1.
-
SANTOS, PAULO C. ; NAZAR, GABRIEL L. ; Carro, Luigi ; ANJAM, FAKHAR ; WONG, STEPHAN . Adapting communication for adaptable processors: A multi-axis reconfiguration approach. In: 2012 International Conference on Reconfigurable Computing and FPGAs (ReConFig 2012), 2012, Cancun. 2012 International Conference on Reconfigurable Computing and FPGAs, 2012.
-
ANJAM, FAKHAR ; WONG, STEPHAN ; Carro, Luigi ; NAZAR, GABRIEL L. ; Rutzig, Mateus B. . Simultaneous reconfiguration of issue-width and instruction cache for a VLIW processor, 2012. v. 1. p. 183-192.
-
ITTURRIET, FABIO P. ; NAZAR, GABRIEL L. ; FERREIRA, RONALDO R. ; MOREIRA, ALVARO F. ; Carro, Luigi . Adaptive parallelism exploitation under physical and real-time constraints for resilient systems. In: 2012 7th International Workshop on Reconfigurable and CommunicationCentric SystemsonChip (ReCoSoC), 2012, York. 7th International Workshop on Reconfigurable and Communication-Centric Systems-on-Chip (ReCoSoC), 2012.
-
NAZAR, GABRIEL L. ; Carro, Luigi . Fast single-FPGA fault injection platform. In: 2012 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFT), 2012, Austin. 2012 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems (DFT), 2012.
-
Matos, Debora ; REINBRECHT, CEZAR ; PALERMO, GIANLUCA ; MARTINELLI, JONATHAN ; SUSIN, Altamiro ; SILVANO, CRISTINA ; Carro, Luigi . Floorplan-aware hierarchical NoC topology with GALS interfaces. In: 2012 IEEE International Symposium on Circuits and Systems ISCAS 2012, 2012, Seoul. 2012 IEEE International Symposium on Circuits and Systems, 2012.
-
ITTURRIET, FABIO ; FERREIRA, RONALDO ; GIRAO, GUSTAVO ; NAZAR, GABRIEL ; MOREIRA, ALVARO ; Carro, Luigi . Resilient Adaptive Algebraic Architecture for Parallel Detection and Correction of Soft-Errors. In: 2012 15th Euromicro Conference on Digital System Design (DSD), 2012, Cesme. 2012 15th Euromicro Conference on Digital System Design, 2012.
-
Nazar, G. ; RECH, P. ; FROST, C. ; CARRO, L . Experimental Evaluation of an Efficient Error Detection Technique for FPGAs. In: European Conference on Radiation and Its Effects on Components and Systems (RADECS), 2012, Biarritz. Proceedings. Piscataway: IEEE, 2012. v. 1.
-
Kologeski, Anelise ; Concatto, Caroline ; Kastensmidt, Fernanda Lima ; Carro, Luigi . ATARDS: An adaptive fault-tolerant strategy to cope with massive defects in Network-on-Chip interconnections, 2012.
-
RECH, P. ; AGUIAR, C. ; FERREIRA, R. ; SILVESTRI, M. ; GRIFFONI, A. ; FROST, C. ; CARRO, L. . Neutron-Induced Soft Errors in Graphic Processing Units, 2012.
-
REINBRECHT, C. ; Matos, D. ; CARRO, L. ; SUSIN, A. ; KREUTZ, M. . MINoC: Providing configurable high throughput interconnection for MPSoCs. In: 2012 IEEE 3rd Latin American Symposium on Circuits and Systems (LASCAS), 2012, Playa del Carmen. 2012 IEEE 3rd Latin American Symposium on Circuits and Systems (LASCAS), 2012.
-
ITTURRIET, FABIO P. ; FERREIRA, RONALDO R. ; Carro, Luigi . Fault-Tolerant Algebraic Architecture for radiation induced soft-errors. In: 2012 17th IEEE European Test Symposium (ETS), 2012, Annecy. 2012 17TH IEEE EUROPEAN TEST SYMPOSIUM (ETS), 2012.
-
RECH, P. ; AGUIAR, C. ; FERREIRA, R. ; FROST, C. ; CARRO, L. . Neutron radiation test of graphic processing units. In: 2012 IEEE 18th International OnLine Testing Symposium (IOLTS 2012), 2012, Sitges. 2012 IEEE 18th International On-Line Testing Symposium (IOLTS), 2012. p. 55-60.
-
NAZAR, GABRIEL L. ; Carro, Luigi . Exploiting Modified Placement and Hardwired Resources to Provide High Reliability in FPGAs. In: 2012 IEEE 20th Annual International Symposium on FieldProgrammable Custom Computing Machines (FCCM), 2012, Toronto. 2012 IEEE 20th International Symposium on Field-Programmable Custom Computing Machines, 2012. p. 149-152.
-
FERREIRA, R. R. ; ITTURRIET, F. ; AGUIAR, C. Z. ; MOREIRA, A. F. ; CARRO, L . Single-Instruction HW/SW Unified Stack for Accelerated and Resilient Application Execution. In: Architectural Support for Programming Languages and Operating Systems, 2012, Londres. Proceedings. New York: ACM, 2012.
-
RECH, P. ; AGUIAR, C. Z. ; FROST, C. ; CARRO, L . Neutron-Induced Multiple Output Errors: a Reality on GPUs. In: Median Workshop, 2012, Annecy. Digest of Papers, 2012. p. 23-28.
-
RECH, P. ; AGUIAR, C. Z. ; FROST, C. ; CARRO, L . Experimental Evaluation of Software Hardening Techniques for GPUs. In: International Conference on Radiation and its Effects on Components and Systems, 2012, Biarritz. Proceedings, 2012.
-
CONCATTO, C. ; Giorgi, R. ; CARRO, L. . Simulating the future kilo-x86-64 core processors and their infrastructure. In: ANSS 2012, 2012. ANSS '12 Proceedings of the 45th Annual Simulation Symposium, 2012.
-
L. Sterpone ; CARRO, L. ; Matos, D. ; Stephan Wong ; FAKHAR,, A. . A New Reconfigurable Clock-Gating Technique for Low Power SRAM-based FPGAs.. In: DATE - Design Automation and Test in Europe, 2011, Grenoble, França. Design Automation and Test in Europe, 2011. v. 1. p. 752-757.
-
Nazar, G. ; CARRO, L. . Energy Efficient Pseudo-Cache Architecture Through Fine-Grained Reconfigurability. In: ISCAS 2011 - International Symposium on Circuits and Systems, 2011, Rio de Janeiro. Proceedings of the International Symposium on Circuits and Systems, 2011. Los Alamitos, CA: ACM/IEEE, 2011.
-
FERREIRA, R. ; PEREIRA, M. M. ; CARRO, L. . An FPGA-based heterogeneous coarse-grain dynamically reconfigurable architecture. In: cases 2011 - 14th International Conference on Compilers, architectures and synthesis for embedded systems, 2011, Taipei, Taiwan. 14th International Conference on Compilers, architectures and synthesis for embedded systems. New York: ACM, 2011. v. 1. p. 195-204.
-
Kologeski, Anelise ; CONCATTO, C. ; CARRO, L. ; KASTENSMIDT, F G . Improving reliability in NOCs by application-specific mapping combined with adaptive fault-tolerant methods in the links. In: ETS - European Test Symposium, 2011, Trondheim, Noruega. IEEE Europeand Test Symposium. Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 123-128.
-
CONCATTO, C. ; Kologeski, Anelise ; CARRO, L. ; KASTENSMIDT, F G ; PALERMO, G. ; SILVANO, C. . Two-levels of adaptive buffer for virtual channel router in NoCs. In: VLSI-SOC 2011, 2011, Hong Kong. 2011 19th IFIP/IEEE International Conference on Very large integartion and SoC. Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 302-307.
-
Nazar, G. ; CARRO, L. . An area effictive parity-based fault detection technique for FPGAs. In: DFTS 2011, 2011, Vancouver. IEEE International Symposium on Defect and Fault Tolerance in VLSI and nanotechnology systems. Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 27-33.
-
ARGYRIDES, C. ; FERREIRA, R. ; LISBÔA, C A L ; CARRO, L. . Decimal hamming: a software-implemented technique to cope with soft errors. In: DFTS 2011, 2011, Vancouver. 2011 19th IFIP/IEEE International Conference on Very large integration and SoC. Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 11-17.
-
FERREIRA, R. ; MOREIRA, A. F. ; CARRO, L. . Matrix control-flow algorithm-based fault tolerance. In: IOLTS 2011, 2011, Athenas. 2011 IEEE 17th International On-Line Testing Symposium (IOLTS). Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 37-42.
-
FAJARDO JUNIOR, J. ; Rutzig, M. B. ; BECK FILHO, Antonio Carlos ; CARRO, L . Towards an Adaptable Multiple-ISA Reconfigurable Processor. In: International Symposium on Applied Reconfigurable Computing, 2011, Belfast. Reconfigurable Computing: Architectures, Tools and Applications (LNCS). Berlin Heidelberg: Springer, 2011. v. 6578. p. 157-168.
-
FAJARDO JUNIOR, J. ; Rutzig, M. B. ; Beck, Antonio C. S. ; CARRO, L . A Dynamically Reconfigurable Architecture with a Two-Level Binary Translation Mechanism. In: 5th Workshop on Reconfigurable Computing, 2011, Heraklion. Proceedings, 2011. p. 11-20.
-
FAJARDO JUNIOR, J. ; Rutzig, M. B. ; CARRO, L ; Beck, Antonio C. S. . A Transparent and Adaptable Multiple-ISA Embedded System. In: International Conference on Engineering of Reconfigurable Systems and Algorithms, 2011, Las Vegas. Proceedings, 2011. p. 197-203.
-
JUNQUEIRA, Alexandre Ambrozi ; Rutzig, M. B. ; ITTURRIET, F. ; CARRO, L . A Reconfigurable Fabric Supporting Full C/C++ Input. In: International Workshop on Reconfigurable Communication-centric Systems-on-Chip, 2011, Montpellier. Proceedings, 2011.
-
Kologeski, Anelise ; Concatto, Caroline ; Carro, Luigi ; Kastensmidt, Fernanda Lima . Adaptive approach to tolerate multiple faulty links in Network-on-Chip. In: 2011 12th Latin American Test Workshop LATW, 2011, Beach of Porto de Galinhas. 2011 12th Latin American Test Workshop (LATW), 2011.
-
Kologeski, Anelise ; Concatto, Caroline ; Carro, Luigi ; Kastensmidt, Fernanda Lima . Improving Reliability in NoCs by Application-Specific Mapping Combined with Adaptive Fault-Tolerant Method in the Links. In: 2011 16th IEEE European Test Symposium (ETS), 2011, Trondheim. 2011 Sixteenth IEEE European Test Symposium, 2011.
-
Kologeski, Anelise ; Concatto, Caroline ; Kastensmidt, Fernanda ; Carro, Luigi . AdNoC case-study for Mpeg4 benchmark. In: the 24th symposium on Integrated circuits and systems design, 2011, João Pessoa. Proceedings of the 24th symposium on Integrated circuits and systems design - SBCCI '11. New York: ACM Press, 2011.
-
Concatto, Caroline ; Kologeski, Anelise ; Carro, Luigi ; Kastensmidt, Fernanda ; PALERMO, GIANLUCA ; SILVANO, CRISTINA . Two-levels of adaptive buffer for virtual channel router in NoCs. In: 2011 IEEE/IFIP 19th International Conference on VLSI and SystemonChip (VLSISoC), 2011, Kowloon. 2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip, 2011.
-
Matos, D. ; CARRO, L. ; SUSIN, Altamiro Amadeu . Associating packets of heterogeneous cores using a synchronizer wrapper for NoCs.. In: ISCAS - International Symposium on Circuits and Systems, 2010, Paris. IEEE International Symposium on Circuits and Systems, 2010. Los Alamitos: IEEE Computer Society, 2010. p. 4177-4180.
-
Rutzig, M. B. ; CARRO, L. ; Madruga, Felipe ; COTA, H. ; BECK, Antonio Carlos S ; Maillard, Nicolas ; Navaux, Philippe O. A. . TLP and ILP exploitation through Reconfigurable multiprocessing system. In: Parallel & Distributed Processing, Workshops and Phd Forum (IPDPSW), 2010 IEEE International Symposium on, 2010, Atlanta. Parallel & Distributed Processing, Workshops and Phd Forum (IPDPSW), 2010 IEEE International Symposium on. Los Alamitos, CA: IEEE Computer Society, 2010. p. 1-8.
-
Matos, D. ; CONCATTO, C. ; CARRO, L ; KASTENSMIDT, F G ; Susin, Altamiro A. ; KREUTZ, Marcio . Monitor-adapter coupling for NoC perforamne tuning. In: SAMOS 2010, 2010, Samos, Gr. SAMOS X - 2010 International conference on Embedded Computer Systems. Los Alamitos, CA: IEEE Computer Society, 2010. v. 1. p. 193-199.
-
RHOD, Eduardo ; STERPONE, L ; CARRO, L. . A new soft-error resilient voltage-mode quaternary latch. In: DFTS 2010, 2010, Kyoto, Japan. 2010 IEEE 25th International Symposium on Defect and Fault Tolerance in VLSI Systems. Los Alamitos, CA: IEEE Computer Society, 2011. v. 1. p. 200-208.
-
Rutzig, M. B. ; BECK, Antonio Carlos S ; CARRO, L. . Dynamically Adapted Low Power Asips. In: Reconfigurable Computing: Architectures, Tools and Applications, 2009, Karlsruhe. 5th international workshop, ARC 2009. Berlin: Springer, 2009. v. 1. p. 110-122.
-
Matos, D. ; CONCATTO, C. ; CARRO, L. ; Kastensmidt, Fernanda Lima ; SUSIN, Altamiro Amadeu . The Need for Reconfigurable Routers in Networks-on-Chip. In: Reconfigurable Computing: Architectures, Tools and Applications, 2009, Karlsruhe. 5th international workshop, ARC 2009. Berlin: Springer, 2009. v. 1. p. 275-280.
-
ARGYRIDES, C. ; A-YAMANI, A. A. ; LISBÔA, C A L ; CARRO, L ; PRADHAN, D. K. . Increasing memory yield in future technologies through innovative design. In: ISQED 2009 International Symposium on Quality of Electronic Design, 2009, San Jose. 10th International Symposium on Quality of Electronic Design (ISQED 2009). Los Alamitos: IEEE Computer Society Press, 2009. v. 1. p. 622-626.
-
LISBÔA, Carlos Arthur Lang ; GRANDO, Carmela ; MOREIRA, A. F. ; CARRO, L . Invariant Checkers: an Efficient Low Cost Technique for Run-time Transient Errors Detection. In: International On-Line Testing Symposium - IOLTS 2009, 2009, Sesimbra. Proceedings of the 15th IEEE International On-Line Testing Symposium IOLTS 2009. Los Alamitos California: IEEE Computer Society Press, 2009. v. 1. p. 35-40.
-
LISBÔA, Carlos Arthur Lang ; ARGYRIDES, C. ; PRADHAN, D. K. ; CARRO, L. . A Fast Error Correction Technique for Matrix Multiplication Algorithms. In: International On-Line Testing Symposium IOLTS 2009, 2009, Sesimbra. Proceedings of the 15th IEEE International On-Line Testing Symposium IOLTS 2009. Los Alamitos California: IEEE Computer Society Press, 2009. v. 1. p. 133-137.
-
PEREIRA, M. M. ; CARRO, L. . Dynamically adapted low-energy fault tolerant processors. In: NASA/ESA Conference on Adaptive Hardware and Systems, 2009, San Francisco - USA. 2009 NASA/ESA conference on Adaptive Hardware and Systems. Los Alamitos California: IEEE Computer Society Press, 2009. v. 1. p. 91-97.
-
FERREIRA, R. ; MARCONE, L. ; BECK, Antonio Carlos S ; LO, T. B. ; Rutzig, Mateus B. ; CARRO, L. . A low cost and adaptable routing network for reconfigurable systems. In: IPDPS - Parallel & Distributed Processing, 2009, Roma. Parallel & Distributed Processing, 2009. IPDPS 2009. IEEE International Symposium on. Los Alamitos, CA: IEEE Computer Society, 2009. p. 1-8.
-
CONCATTO, C. ; CARRO, L. ; KASTENSMIDT, F G ; Susin, Altamiro A. ; KREUTZ, Marcio . NoC power optimization using a reconfigurable router. In: IEEE symposium on VLSI - ISVLSI, 2009, Tampa, Florida. IEEE Computer society annual symposium on VLSI - ISVLSI. Los Alamitos, CA: IEEE Computer Society, 2009. v. 1. p. 235-240.
-
LISBÔA, Carlos Arthur Lang ; CARRO, L. . XOR-based Low Cost Checkers for Combinational Logic. In: IEEE International Symposium on Defect and Fault Tolerance of VLSI Systems (DFT 2008), 2008, Boston. IEEE International Symposium on Defect and Fault Tolerance of VLSI Systems. Los Alamitos: IEEE Computer Society Press, 2008. v. 1. p. 281-289.
-
BRISOLARA, Lisane B de ; OLIVEIRA, Marcio F S ; REDIN, R. ; LAMB, L. C. ; CARRO, L. ; WAGNER, Flávio Rech . Using UML as Front-end for Heterogeneous Software Code Generation Strategies. In: DATE - Design Automation and Test in Europe, 2008, Munique, Alemanha. DATE'08 - Design, Automation and Test in Europe. Los Alamitos California: IEEE Computer Society Press, 2008. v. 1. p. 504-509.
-
BECK FILHO, Antonio Carlos ; Rutzig, M. B. ; GAYDADJIEV, G. ; CARRO, L. . Transparent Reconfigurable Acceleration for Heterogeneous Embedded Applications. In: DATE - Design Automation and Test in Europe, 2008, Munique, Alemanha. DATE'08 - Design, Automation and Test in Europe. Los Alamitos California: IEEE Computer Society Press, 2008. v. 1. p. 1208-1213.
-
REDIN, R. ; OLIVEIRA, Marcio F S ; BRISOLARA, Lisane B de ; MATTOS, Júlio C B ; LAMB, L. C. ; WAGNER, Flavio Rech ; CARRO, L. . On the Use of Software Quality Metrics to Improve Physical Properties of Embedded Systems. In: Distributed Embedded Systems: Design, Middleware and Resources, 2008, Milano, Italia. DIPES 2008 - Distributed Embedded Systems: Design, Middleware and Resources. Boston: Springer, 2008. v. 1. p. 101-110.
-
BECK, Antonio Carlos S ; Rutzig, M. B. ; GAYDADJIEV, G. ; CARRO, L. . Run-time Adaptable Architectures for Heterogeneous Behavior Embedded Systems. In: Reconfigurable Computing: Architectures, Tools and Applications, 2008, London. Reconfigurable Computing: Architectures, Tools and Applications, 4th International Workshop, ARC 2008,. Berlim: Springer, 2008. v. 1. p. 111-124.
-
FERREIRA, R. ; MARCONE, L. ; Rutzig, M. B. ; BECK, Antonio Carlos S ; CARRO, L. . Reducing interconnection cost in coarse-grained dynamic computing through multistage network. In: Field Programmable Logic, 2008, Heidelberg. FPL 2008 - Field Programmable Logic. Los Alamitos California: IEEE Computer Society Press, 2008. v. 1. p. 47-52.
-
Rutzig, M. B. ; BECK, Antonio Carlos S ; CARRO, L. . Balancing reconfigurable data path resources according to application requirements. In: Parallel and Distributed Processing, 2008. IPDPS 2008. IEEE International Symposium on, 2008, Miami, Florida. RAW 2008 - Parallel and Distributed Processing, 2008. IPDPS 2008. IEEE International Symposium on. Los Alamitos California: IEEE Computer Society Press, 2008. v. 1. p. 1-8.
-
Rhod, Eduardo Luis ; Rutzig, M. B. ; CARRO, L. . Binary translation process to optimize nanowire arrays usage. In: International Symposiun on Circuits and Systems, 2008, Seattle. International Symposium on Circuits and Systems (ISCAS 2008). Los Alamitos California: IEEE Computer Society, 2008. v. 1. p. 396-399.
-
Rhod, Eduardo Luis ; CARRO, L. . An efficient test and characterization approach for nanowire-based architectures. In: Proceedings of the 21st annual symposium on Integrated circuits and system design, 2008, Gramado. SBCCI 2008 - Proceedings of the 21st annual symposium on Integrated circuits and system design. New York: ACM - Association for Computing Machinery, 2008. v. 1. p. 34-39.
-
LISBÔA, Carlos Arthur Lang ; ARGYRIDES, C. ; PRADHAN, D. K. ; CARRO, L. . Algorithm Level Fault Tolerance: A Technique to Cope with Long Duration Transient Faults in Matrix Multiplication Algorithms. In: VLSI Test Symposium, 2008, San Diego - CA. VTS08 VLSI Test Symposium. Los Alamitos California: IEEE Computer Society Press, 2008. v. 1. p. 363-370.
-
LISBÔA, C A L ; KASTENSMIDT, F G ; CARRO, L. . Analysing the effects of the granularity of recomputation based techniques to cope with radiation induced soft errors. In: Computing Frontiers 2008, 2008, Ischia, Itália. Proceedings of the 2008 Computing Frontiers Conference. New York: ACM, 2008. v. 1. p. 329-327.
-
OLIVEIRA, Marcio F da S ; REDIN, R. ; CARRO, L. ; LAMB, L. C. ; WAGNER, Flavio Rech . software quality metrics and their impact on embedded software. In: Mompes 2008, 2008, Budapest. Proceedings of the 5th International workshop on model based methodologies for pervasive and embedded software. Los Alamitos, CA: IEEE Computer Society, 2008. v. 1. p. 68-77.
-
E, Schuler ; NEGREIROS, Marcelo ; Nouet, P. ; CARRO, L. . A digitally Testable Capacitance-Insensitive Mixed-Signal Filter. In: ETS, 2007, Freiburg - Alemanha. 12th IEEE European Test Symposium. Los Alamitos California: IEEE Computer Society Press, 2007. v. 1. p. 21-26.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . Digital Generation of Signals for Low Cost RF BIST. In: ETS, 2007, Freiburg, Alemanha. 12th IEEE European Test Symposium. Los Alamitos California: IEEE Computer Society Press, 2007. v. 1. p. 49-60.
-
LISBÔA, Carlos Arthur Lang ; Erigson, M. ; CARRO, L. . System level approaches for mitigation of long duration transients faults in future technologies. In: ETS, 2007, Freiburg - Alemanha. 12th IEEE European Test Symposium. Los Alamitos California: IEEE Computer Society Press. v. 1. p. 165-170.
-
NEGREIROS, Marcelo ; SOUZA JR, Adao Antonio de ; CARRO, L. ; SUSIN, Altamiro Amadeu . RF signal generation beyond Nyquist. In: VTS, 2007, Berkeley. 25th VLSI Test Symposium. Los Alamitos California: IEEE Computer Society Press, 2007. v. 1. p. 15-20.
-
Kai Huang ; Sang-Il Han ; Katalin Popovici ; BRISOLARA, Lisane B de ; Xavier Guerin ; Lei Li ; Xiaolang Yan ; Soo-Ik Chae ; CARRO, L. ; Ahmed Jerraya . Simulink-Based MPSOC Design Flow: Case Study of Motion-JPEG and H.264. In: DAC, 2007, San Diego - CA. 44th ACM/IEEE Design Automation Conference. Los Alamitos California: IEEE Computer Society Press. v. 1. p. 39-42.
-
MATTOS, Júlio C B ; BECK FILHO, Antonio Carlos ; CARRO, L. . Object-Oriented Reconfiguration. In: RSP, 2007, Porto Alegre. 18th IEEE/IFIP International Workshop on Rapid System Prototyping. Los Alamitos California: IEEE Computer Society Press, 2007. v. 1. p. 69-72.
-
RHOD, Eduardo ; LISBÔA, Carlos Arthur Lang ; CARRO, L. . A Low-SER Efficient Processor Architecture for Future Technologies. In: DATE, 2007, Nice-França. ACM/IEEE Design Automation and Test in Europe. Los Alamitos California: IEEE Computer Society Press, 2007. v. 1. p. 1448-1453.
-
SILVA, R. C. ; BOUDINOV, H. ; CARRO, L. . Quaternary Look-Up Tables Using Voltage-Mode CMOS Logic Design. In: ISMVL, 2007, Oslo - Norway. 37th International Symposium on Multiple-Valued Logic. Washington, DC, USA: IEEE Computer Society Press, 2007. v. 1. p. 56-60.
-
WAGNER, Flávio Rech ; CARRO, L. . Embedded SW Design Space Exploration and Automation using UML-Based Tools. In: IESS, 2007, Irvine - CA. IFIP TC10 Working Conference International Embedded Systems Symposium. New York: Springer, 2007. v. 1. p. 437-440.
-
LISBÔA, C A L ; KASTENSMIDT, F G ; NETO, H.Neto, H. ; WIRTH, G. ; CARRO, L. . Using built-in current sensors to cope with long duration transient faults in future technologies. In: ITC 2007 - International Test conference, 2007, Santa Clara, EUA. ITC 2007 - International Test conference. Los Alamitos: IEEE Computer Society, 2007. v. 1. p. 1-10.
-
SCHÜLLER, Erik ; SOUZA JR, Adao de ; CARRO, L. . Spare parts in analog circuits: a filter example. In: DFTS 2007, 2007, Roma. 2011 IEEE 22th International Symposium on Defect and Fault Tolerance in VLSI Systems. Los Alamitos, CA: IEEE Computer Society, 2007. v. 1. p. 321-328.
-
Beck, Antonio C. S. ; CARRO, L . Transparent acceleration of data dependent instructions for general purpose processors. In: VLSI-SOC 2007, 2007. 2007 IFIP WG 10.5 International Conference on Very large scale integration. Los Alamitos, CA: IEEE Computer Society. v. 1. p. 66-67.
-
Rutzig, Mateus B. ; Beck, Antonio C. S. ; CARRO, L. . Transparent dataflow execution for embedded applications. In: ISVLSI 2007, 2007, Porto Alegre. IEEE Computer society annual symposium on VLSI - ISVLSI 2007. Los Alamitos, CA: IEEE Computer Society, 2007. v. 1. p. 47-52.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . An Improved RF Loopback for Test Time Reduction. In: Design Automation & Test in Europe - DATE 2006, 2006, Munique. Design Automation & Test in Europe - DATE 2006. Los Alamitos: IEEE, 2006. v. 1. p. 646-651.
-
E, Schuler ; CARRO, L. . Increasing analog programmability in SOCs. In: RAW - Reconfigurable Architecture Workshop, 2006, Rhodes Island. 13th Reconfigurable Architecture Workshop, 2006. p. 10-16.
-
E, Schuler ; Farenzena, D. ; CARRO, L. . Evaluating Sigma-delta modulated signals to develop fault-tolerant circuits. In: ETS, 2006, Southampton. 11th European Test Symposium. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 137-142.
-
E, Schuler ; Erigson, M. ; Farenzena, D. ; CARRO, L. . Fault tolerant DSP microprocessor for Sigma-delta modulated signals. In: Selse, 2006, Urbana-Champaign. 2nd workshop on systemn level effects of logic soft errors, 2006. v. 1. p. 8-14.
-
E, Schuler ; CARRO, L. . Increasing reliability in future technologies systems. In: LATW, 2006, Buenos Aires. 7th Latin-American Test Workshop, 2006. p. 181-185.
-
E, Schuler ; CARRO, L. . On the use of higher-order Sigma-Delta modulators for reliable digital circuits design. In: IMSTW, 2006, Edinburgh. 12th IEEE International Mixed-Signals Test Workshop, 2006. p. 97-101.
-
RHOD, Eduardo ; LISBÔA, Carlos Arthur Lang ; CARRO, L. . Using Memory to cope with simultaneous transient faults. In: LATW, 2006, Buenos Aires. 7th Latin-American Test Workshop. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 151-156.
-
RHOD, Eduardo ; LISBÔA, Carlos Arthur Lang ; CARRO, L. . Fault Tolerance against multiple SEUs using memory-based circuits to improve the architectural vulnerability factot. In: ETS, 2006, Southampton. 12th IEEE European Test Symposium - Informal Digest of Papers, 2006. v. 1. p. 229-234.
-
MATTOS, Júlio C B ; Stephan Wong ; CARRO, L. . The Molen FemtoJava Engine. In: ASAP, 2006, Steamboat Springs, Colorado. 17th IEEE international Conference on Application-Specific Systems, Architectures and Processors. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 19-22.
-
OLIVEIRA, Marcio F S ; BRISOLARA, Lisane B de ; CARRO, L. ; WAGNER, Flávio Rech . Early embedded software design space exploration using UML-based estimation. In: RSP, 2006, Chania - Grecia. 17th International Workshop on Rapid System Prototyping. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 24-30.
-
OLIVEIRA, Marcio F da S ; Brião, E. W. ; Nascimento, F. A. ; BRISOLARA, Lisane B de ; CARRO, L. ; WAGNER, Flávio Rech . Multi-objective design space exploration based on UML. In: UML-SOC, 2006, San Francisco - USA. Workshop on UML for SOC design, 2006. p. 11-16.
-
BECK FILHO, A C S ; GOMES, Victor F ; CARRO, L. . Dynamic Instruction Merging and a Reconfigurable Array: Dataflow Execution with software Compatibility. In: ARC, 2006, Delft - Holanda. LNCS3985 - Reconfigurable Computing: Architectures and Applications. Berlim: Springer, 2006. v. 1. p. 449-454.
-
BECK FILHO, Antonio Carlos ; Rutzig, M. B. ; CARRO, L. . Cache Performance Impacts for Stack Machines in Embedded Systems. In: SBCCI, 2006, Ouro Preto. 19th Symposium on Integrated Circuits and Systems Design. New York: ACM - Association for Computing Machinery, 2006. v. 1. p. 155-160.
-
SILVA, R. C. ; BOUDINOV, H. ; CARRO, L. . A cell library for low power high performance cmos voltage-mode quaternary logic. In: SBCCI, 2006, Ouro Preto. 19th Symposium on Integrated Circuits and Systems Design. New York: ACM - Association for Computing Machinery, 2006. v. 1. p. 167-172.
-
Franz, A. P. ; KASTENSMIDT, Fernanda Gusmão de Lima ; CARRO, L. ; COTA, Érika . Evaluation of SEU and crosstalk effects in Network-on-chip switches. In: SBCCI, 2006, Ouro Preto. 19th Symposium on Integrated Circuits and Systems Design. New York: ACM - Association for Computing Machinery, 2006. v. 1. p. 202-207.
-
LISBÔA, Carlos Arthur Lang ; CARRO, L. ; M. Sonza Reorda ; M. Violante . Online hardening of programs against SEUs and SETs. In: DFT, 2006, Arlington, VA. 21st IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 280-288.
-
Michels, A. ; Petroli, L. ; LISBÔA, Carlos Arthur Lang ; KASTENSMIDT, Fernanda Gusmão de Lima ; CARRO, L. . SET fault tolerant combinational circuits based on Majority Logic. In: DFT, 2006, Arlington, VA. 21st IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems. Los Alamitos California: IEEE Computer Society Press, 2006. v. 1. p. 345-352.
-
BRISOLARA, Lisane ; BECKER, Leandro Buss ; CARRO, L. ; WAGNER, Flávio Rech ; PEREIRA, Carlos Eduardo ; REIS, Ricardo A da Luz . Comparing High-level Modeling Approaches for Embedded Systems Design. In: ASIA SOUTH PACIFIC DESIGN AUTOMATION CONFERENCE ASP-DAC, 2005, Shanghai. IEEE - ASIA SOUTH PACIFIC DESIGN AUTOMATION CONFERENCE ASP-DAC, 2005. v. 2. p. 986-989.
-
MARCON, César ; BORIN, André ; SUSIN, Altamiro Amadeu ; CARRO, L. ; WAGNER, Flávio Rech . Time and Energy Efficient Mapping of Embedded Applications on to NoCs.. In: ASIA SOUTH PACIFIC DESIGN AUTOMATION CONFERENCE ASP-DAC, 2005, Shanghai. IEEE - ASIA SOUTH PACIFIC DESIGN AUTOMATION CONFERENCE ASP-DAC, 2005. v. 1. p. 33-39.
-
CARDOSO, R S ; KREUTZ, M e ; CARRO, L. ; SUSIN, Altamiro Amadeu . Design Space Exploration on Heterogeneous Network-on-Chip. In: International Symposium on Circuits and Systems ISCAS 2005, 2005, Kobe. International Symposium on Circuits and Systems ISCAS 2005, 2005. v. 1. p. 428-431.
-
KREUTZ, Marcio ; MARCON, Cesar ; CARRO, L. ; CALAZANS, Ney ; SUSIN, Altamiro Amadeu . Energy and Latency Evaluation of NOC Topologies. In: International Symposium on Circuits and Systems ISCAS 2005, 2005, Kobe. International Symposium on Circuits and Systems ISCAS 2005, 2005. v. 5. p. 5866-5869.
-
CARRO, L. ; SCHÜLLER, Erik . Increasing Fault Tolerance To Multiple Upsets Using Digital Sigma-Delta Modulators. In: 11th IEEE International On-Line Testing Symposium, 2005, Riviera Francesa. 11th IEEE International On-Line Testing Symposium. Los Alamitos: IEEE Computer Society, 2005. v. 1. p. 255-259.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . An Enhanced Loopback Test for RF Circuits. In: 4 IEEE International Workshop on Test of Wireless Circuits and Systems - WTW 2005, 2005, Cannes. 4 IEEE International Workshop on Test of Wireless Circuits and Systems - WTW 2005, 2005. v. 1. p. 68-70.
-
SCHÜLLER, Erik ; CARRO, L. . Reliable Digital Circuits Design Using Analog Components. In: 11th International Mixed-Signals Testing Workshop - IMSTW 2005, 2005, Cannes. 11th International Mixed-Signals Testing Workshop - IMSTW 2005, 2005. v. 1. p. 166-178.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu . Noise Figure Evaluation Using Low Cost BIST. In: DESIGN, AUTOMATION AND TEST IN EUROPE - DATE 2005, 2005, Munique. ACM SIGDA PUBLICATIONS ON CDROM, 2005. v. 1. p. 20-30.
-
KASTENSMIDT, F ; STERPONE, L ; REORDA, M Sonza ; CARRO, L. . On The Optimal Design of Triple Modular Redundancy Logic for SRAM-Based FPGAs. In: Design, Automation and Teste In Europe - DATE 2005, 2005, Munique. ACM SIGDA PUBLICATIONS ON CDROM, 2005. v. 1. p. 321-326.
-
SOUZA JR, Adao Antonio de ; CARRO, L. ; TOUSAAD, Jawad . Adaptive Processing Applied to the Design of Highly Digital Analog Interfaces. In: International Symposium on Circuits and Systems ISCAS 2005, 2005, Kobe. International Symposium on Circuits and Systems ISCAS 2005, 2005. v. 5. p. 5597-5600.
-
BECK, Antonio Carlos S ; CARRO, L. . Dynamic Reconfiguration with Binary Translation: Breaking the ILP Barrier with Software Compatibility. In: 42nd Design Automation Conference, 2005, Anaheim-Califórinia. 42nd DAC 2005, 2005. v. 1. p. 732-737.
-
OLIVEIRA, Marcio F da S ; BRISOLARA, Lisane ; WAGNER, Flavio R ; CARRO, L. . Embedded SW Design Exploration Using UML-based Estimation Tools. In: UML-SOC workshop, 2005, Anaheim-Califórnia. UML-SOC workshop 2005, 2005. v. 1. p. 62-68.
-
OLIVEIRA, Marcio F da S ; BRISOLARA, Lisane B de ; CARRO, L. ; WAGNER, Flávio Rech . An Emdedded SW Design Exploration Approach based on UML Estiamtion Tools. In: IFIP TC 10 Working Conference: International Embedded Systems Symposium (IESS), 2005, Manaus. From Specification to Embedded Systems Application, 2005. v. 1. p. 45-54.
-
MATTOS, Julio C B ; SPECHT, Emilena ; NEVES, Bruno ; CARRO, L. . Object Orientation Problems when applied to the Embedded Systems Domain. In: IFIP TC 10 Working Conference: International Embedded Systems Symposium (IESS), 2005, Manaus. From Specification to Embedded Systems Application, 2005. v. 1. p. 147-156.
-
MORAES, M S ; COTA, Erika F ; CARRO, L. ; WAGNER, Flavio Rech ; LUBASZEWSKI, Marcelo Soares . An Efficient Constraint-based Test Selection Method for Embedded Processor Cores. In: I Latin-American Workshop on Dependable Automation System (WDAS), 2005, Salvador. I Latin-American Workshop on Dependable Automation System (WDAS), 2005. v. 1. p. 20-30.
-
MORAES, Marcelo ; COTA, Érika ; CARRO, L. ; WAGNER, Flávio Rech ; LUBASZEWSKI, Marcelo Soares . A Constraint-Based solution for On-Line Testing of Processors Embedded in Real-Time Applications. In: SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005, Florianópolis. SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005. v. 1. p. 68-79.
-
LISBÔA, C A L ; SCHÜLER, e ; CARRO, L. . Going Beyond TMR for Protection Against Multiple Faults. In: SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005, Florianópolis. SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005. v. 1. p. 80-91.
-
CARRO, L. ; BECK, Antonio Carlos S ; GOMES, Victor F . Exploiting Java Through Binary Translation for Low Power Embedded Reconfigurable Systems. In: SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005, Florianópolis. SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005. v. 1. p. 92-97.
-
MATTOS, Júlio C B ; SPECHT, Emilena ; NEVES, Bruno ; CARRO, L. . Making Object Oriented Efficient for Embedded System Applications. In: SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005, Florianópolis. SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005. v. 1. p. 104-109.
-
KREUTZ, Márcio ; MARCON, César A ; WAGNER, Flávio Rech ; CARRO, L. ; SUSIN, Altamiro A . Design Space Exploration Comparing Homogeneous and Heterogeneous Network-on-Chip Architectures. In: SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005, Florianópolis. SBCCI2005 18th Symposium on Integrated Circuits and Systems Design, 2005. v. 1. p. 190-195.
-
BECK, Antonio C ; MATTOS, Julio C B ; CARRO, L. . Applying JAVA on Single-Chip Multiprocessors. In: XI International Workshop IBERCHIP, 2005, Salvador. Proceedings of XI International Workshop IBERCHIP, 2005. v. 1. p. 19-22.
-
GOMES, Victor F ; BECK, Antonio C ; MATTOS, Julio C B ; BARCELOS, Renato H ; CARRO, L. . Automatic Generation of an MP3 Player. In: XI International Workshop IBERCHIP, 2005, Salvador. Proceedings in XI International Workshop, 2005. v. 1. p. 31-34.
-
MORAES, Marcelo S ; COTA, Erika F ; CARRO, L. ; WAGNER, Flavio Rech ; LUBASZEWSKI, Marcelo S . An application-Oriented Method for Selection of Self-Test Routines in Real-Time Embedded Systems. In: 6th IEEE Latin American Test Workshop, 2005, Salvador. Informal Proceedings, 2005. v. 1. p. 343-348.
-
BECK, Antonio C ; HENTSCHKE, Renato ; MATTOS, Julio C B ; REIS, Ricardo ; CARRO, L. . Fast and Efficient Test Generation for Embedded Stack Processors. In: 6th IEEE Latin American Test Workshop, 2005, Salvador. LATW 2005, 2005. v. 1. p. 331-336.
-
ANGELO, Rubinei P ; COTA, Erika ; CARRO, L. ; LUBASZEWSKI, Marcelo . Implications of the High-Level Design Style in the Testability: A Case Study. In: 6th IEEE Latin American Test Workshop, 2005, Salvador. LATW 2005, 2005. v. 1. p. 291-295.
-
SCHÜLLER, Erik ; CARRO, L. . Reliable Digital Circuits Design Using Sigma-Delta Modulated Signals. In: DFT, 2005, Monterey, CA. 20st IEEE International Symposium on Defect and Fault Tolerance in VLSI Systems. Los Alamitos California: IEEE Computer Society, 2005. v. 1. p. 314-323.
-
SOUZA JR, Adão de ; CARRO, L. . Statistical Acquisition for Embedded Instrumentation. In: IEEE Instrumentation and Measurement Technology Conference, 2004, Como. Proceedings, 2004. v. 1.
-
FABRIS, Eric ; CARRO, L. ; BAMPI, Sérgio . Modeling and designing high performance analog reconfigurable circuits.. In: ACM SBCCI, 2004, Porto de Galinhas. ACM SBCCI, 2004. v. 1. p. 49-54.
-
E, Schuler ; CARRO, L. . A Low power FPAA for wide band applications. In: Field FPL - The International Conference on Field Programmable Logic and Applications, 2004, Antuerpia. LNCS 3203, 2004. v. 1. p. 970-971.
-
MATTOS, J ; BRISOLARA, L ; HENTSCHKE, R ; CARRO, L. ; WAGNER, F . Design Space Exploration with Automatic Generation of IP-Based Embedded Software. In: IFIP Working Conference on Distributed and Parallel Computing, 2004, Toulouse, 2004. v. 1.
-
CORREA, e F ; BASSO, e W ; WILKE, G ; WAGNER, F ; CARRO, L. . The Implications of Real-Time Behavior in Networks-on-chip Architectures. In: IFIP Working Conference on Distributed and Parallel, 2004, Toulouse. Proceedings, 2004. p. 307-316.
-
NEGREIROS, M ; CARRO, L. ; SUZIM, A A . Low Cost On-Line Testing of RF circuits.. In: International On-Line Test Symposium IOLTS 2004, 2004, Funchal. Proceedings, 2004. v. 1. p. 48-73.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUZIM, Altamiro Amadeu . Towards a BIST technique for noise figure evaluation. In: European Test Symposium, 2004, Ajaccio - Corsega. Proceedings, 2004. p. 122-126.
-
ANDRADE JR, A ; CARRO, L. ; LUBASZEWSKI, Marcelo Soares . THD Testing of Analog Circuits Using Autocorrelation Sequence. In: V Latin American Test Workshop - LATW 2004, 2004, Cartagena, 2004. v. 1. p. 140-145.
-
CARRO, L. ; NEGREIROS, Marcelo ; SUZIM, Altamiro Amadeu . Low Cost analog Testing of RF Signal Paths. In: Design Automation and Test in Europe - DATE 2004, 2004, Paris. DATE 2004, 2004. p. 292-297.
-
SHÜLLER, e ; CARRO, L. . Achieving wide frequency range in an Analog FPGA.. In: IEEE International Conference on Field Programmable Technology, 2004, Brisbane. IEEE International Conference on Field Programmable Technology, 2004. p. 383-386.
-
BRISOLARA, Lisane ; BECKER, Leandro Buss ; CARRO, L. ; WAGNER, Flávio ; PEREIRA, Carlos . Evaluating High-level Models for Real-Time Embedded Systems Design. In: IFIP Working Conference on Distributed and Parallel, 2004, Toulouse. Proceedings, 2004. v. 1. p. 277-286.
-
HENTSCHKE, Renato ; BECK FILHO, Antonio Carlos ; MATTOS, J ; CARRO, L. ; LUBASZEWSKI, Marcelo ; REIS, Ricardo . Using Genetic Algorithms to Accelerate Automatic Software Generation for Microprocessor Functional Testing. In: 5th Latin-American Test Workshop, 2004, Cartagena. Digest of Papers - LATW 2004, 2004. v. 1. p. 37-42.
-
MATTOS, Julio ; BECK FILHO, Antonio Carlos ; CARRO, L. ; WAGNER, Flavio . Design Space Exploration with Automatic Selection of SW and HW for Embedded Applications. In: International Workshop on Systems, Architectures, MOdeling, and Simulation, 2004, Samos. Proceedings, 2004. v. 1. p. 303-312.
-
SOUZA JR, Adão de ; CARRO, L. . Highly Digital, Low-Cost Design of Statistic Signal Acquisition. In: Design, Automation and Test in Europe - DATE 2004, 2004, Paris. Proceedings, 2004. v. 1. p. 10-15.
-
MAINARDI, Josias ; SOUZA JR, Adao de ; CARRO, L. ; SUSIM, Altamiro . A Comparison of Totally Digital ADCs for SOCs. In: IEEE International Symposium on Circuits and Systems, 2004, Vancouver. Proceedings ISCAS 2004, 2004. v. 1. p. 641-644.
-
CARRO, L. ; BECK, Fl ; S, A C . A VLIW Low Power Java Processor for Embedded Applications In. In: ACM SBCCI, 2004, Porto de Galinhas. ACM SBCCI 2004, 2004. v. 1. p. 157-162.
-
MATTOS, J ; BRISOLARA, L ; HENTSCHKE, R ; CARRO, L. ; WAGNER, F . Design Space Exploration with Automatic Generation of IP-Based Embedded Softwar. In: IFIP Working Conference on Distributed and Parallel Computing, 2004, Toulouse. Proceedings. Boston: Kluwer Academic Publishers, 2004. v. 1. p. 237-246.
-
CARRO, L. ; E, Cota ; NEGREIROS, M . Reuse-Based Test Planning for Mixed Signals SOCs with Analog BIST. In: IEEE International Mixed Signal Workshop, 2004, Portland. Proceedings, 2004. v. 1. p. 129-135.
-
NEGREIROS, M ; CARRO, L. ; SUZIM, A A . A Method to evaluate noise figure suitable for BIST. In: IEEE International Mixed Signal Testing Workshop, 2004, Portland. Proceedings, 2004. v. 1. p. 13-19.
-
COTA, Erika ; CARRO, L. ; WAGNER, Flavio ; LUBASZEWSKI, Marcelo . Power-aware NoC reuse on the Testing of Core-based Systems. In: IEEE Internacional Test Conference, 2003, Charlotte. Proceedings. Los Alamitos: IEEE Coputer Society, 2003. v. 1. p. 612-621.
-
FABRIS, Eric ; CARRO, L. ; BAMPI, Sergio . An Universal High-Performance Analog Interface for Signal Processing SOCs. In: 16th Symposium on Integrated Circuits and Systems Design, 2003, São Paulo. Proceedings. Los Alamitos: IEEE Computer Society Press, 2003. v. 1. p. 137-142.
-
NEGREIROS, Marcelo ; SCHULER, e ; CARRO, L. ; SUSIN, Altamiro . Testing RF Signal Paths Using Spectral Analysis and Subsampling. In: 16th Symposium on Integrated Circuits and Systems Design, 2003, São Paulo. Proceedings. Los Alamitos: IEEE Computer Society Press, 2003. v. 1. p. 329-334.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . Towards a low cost BIST for RF Mixers. In: IEEE 9th Internacional Mixed-Signal Testing Workshop, 2003, Sevilla. Proceedings, 2003. v. 1. p. 73-78.
-
CARRO, L. ; CORREA, Edgard ; CARDOZO, R ; MORAES, Fernando ; BAMPI, Sergio . Exploiting Reconfigurability for Low-Power Control of Embedded Processors. In: ISCAS 2003- International Simposium on Circuits and Systems, 2003, Banckok. Proceedings, 2003. v. 1. p. 421-424.
-
FLORES, Maria da Gloria ; NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . INL and NDL Estimation based on Noise ADC Test. In: 20th IMTC 2003, Instrumentation and Measurement Technology Conference, 2003, Vail. Proceedings, 2003. v. 1. p. 1350-1353.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . Ultra Low Cost Analog BIST using Spectral Analysis. In: 21st IEEE VLSI Test Symposium, 2003, Napa Valley. Proceedings, 2003. v. 1. p. 77-82.
-
COTA, Erika ; KREUTZ, Marcio ; ZEFERINO, Cesar ; CARRO, L. ; LUBASZEWSKI, Marcelo ; SUSIN, Altamiro Amadeu . The Impact of NoC Reuse on the Testing of Core-based Systems. In: 21st IEEE VLSI Test Symposium, 2003, Napa Valey. Proceedings, 2003. v. 1. p. 77-82.
-
LIMA, Fernanda ; CARRO, L. ; REIS, Ricardo . Single Event Upset Mitigation Techniques for SRAM-Based. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 112-117.
-
NEUBERGER, Gustavo ; LIMA, Fernanda ; CARRO, L. ; REIS, Ricardo . A Multiple Bit Upset Tolerant SRAM Memory. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 118-123.
-
FLORES, Maria da Gloria ; NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . Practical Implementation of the Linearity Characterization of ADCs. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 204-208.
-
LIMA, Fernanda ; CARRO, L. ; REIS, Ricardo . Reducing Pin and Area Overhead in Fault-Toloerant FPGA-based Designs. In: 11th International Symposium on Field Programmable Gate Arrays, 2003, Monterey. Proceedings. New York: ACM-SIGDA, 2003. v. 1. p. 108-117.
-
KRAPF, Rafael ; CARRO, L. . Efficient Signal Processing in Embedded Java Systems. In: ISCAS 2003- International Simposium on Circuits and Systems, 2003, Bangkok. Proceedings, 2003. v. 1. p. 61-64.
-
FLORES, Maria da Gloria ; NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro Amadeu ; CLAYTON, F ; BENEVENTO, C . Low Cost BIST for Static and Fynamic Testing of ADCs. In: IEEE 9th Internacional Mixed-Signal Testing Workshop, 2003, Sevilla. Proceedings, 2003. v. 1. p. 25-27.
-
CARRO, L. ; BECK FILHO, A C S . Low Power Java Processor for Embedded Applications. In: IFIP VLSI-SOC, 2003, Darmstadt. IFIP WG 105 Proceedings, 2003. p. 239-244.
-
BECK FILHO, Antonio Carlos ; MATTOS, Julio ; WAGNER, Flavio ; CARRO, L. . CACO PS - A General Purpose Cycle-accurate Configurable Power Simulator. In: 16th Symposium on Integrated Circuits and Systems Design, 2003, São Paulo. Proceedings. Los Alamitos: IEEE Computer Society Press, 2003. v. 1. p. 349-354.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . Ultimate Low Cost Analog BIST. In: DAC 2003, Design Automation Conference, 2003, Anaheim. Proceedings, 2003. p. 570-573.
-
COTA, Erika ; CARRO, L. ; LUBASZEWSKI, Marcelo . SOC Benchmarks and System Test Planning: How Information is Enough ?. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 153-158.
-
CORREA, Edgard ; CARDOZO, R ; COTA, Erika ; BECK FILHO, Antonio Carlos ; WAGNER, Flavio ; CARRO, L. ; SUSIN, Altamiro ; LUBASZEWSKI, Marcelo . Testing the Wrappers of a Network on Chip: a Case Study. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceeedings, 2003. v. 1. p. 159-163.
-
SOUZA JR, Adão ; CARRO, L. . Macrocell for Digital Test of Analog Blocks. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 217-222.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIN, Altamiro . Low Cost Analog BIST using Binary Noise. In: 4th IEEE Latin American Test Workshop, 2003, Natal. Proceedings, 2003. v. 1. p. 229-233.
-
LIMA, Fernanda ; CARRO, L. ; REIS, Ricardo . Designing Fault Tolerant Systems into SRAM-based FPGAs.. In: ACM/IEEE Design Automation Conference - DAC, 2003, Ananheim. Proceedings. Los Alamitos: IEEE Computer Society, 2003. v. 1. p. 650-655.
-
CARRO, L. ; SOUZA JR, Adão A . An All-Digital ADC for Instrumentation within SOCs. In: IFIP VLSI-SOC, 2003, Darmstadt. IFIP WG 10.5 International Conference on Very Large Scale Integration of system-on-Chip, 2003. p. 398-403.
-
CARRO, L. ; ROSA, L ; WAGNER, Flavio R ; CARISSIMI, A ; REIS, A . Scheduling Policy Costs on a Java Microcontroller. In: JRTES Workshop on Java Technologies for Real-Time Embedded Systems, 2003, Springer - Verlag. OTm 2003 Workshops, 2003. p. 520-533.
-
FABRIS, Eric Ericson ; CARRO, L. ; BAMPI, Sergio . An Analog Interface with Constant Performance for SOCs. In: ISCAS-2003 International Simposium on Circuits and Systems, 2003, Bangckok. ISCAS-2003 International Simposium on Circuits and Systems, 2003. v. 1. p. 773-776.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIM, Altamiro . Testing Analog Circuits Using Spectral Analysis. In: 8th International Mixed-Signal Testing Workshop, 2002, Montreaux. 8th International Mixed-Signal Testing Workshop. Los Alamitos: IEEE Computer Society Press, 2002. v. 1. p. 429-433.
-
MATTOS, J ; CARRO, L. . Efficient Arcitecture for FPGA-based Microcontrollers. In: ISCAS 2002 - International Simposium on Circuits and Systems, 2002, Scottsdale, Arizona. Proceedings. Los Alamitos: IEEE Computer Society Press, 2002. v. V. p. 805-809.
-
GONSALES, A. ; LUBASZEWSKI, Marcelo ; CARRO, L. ; RENOVELL, M. . A New FPGA for DSP Applictaions Integrating BIST Capabilities. In: LATW 2002 - 3rd IEEE latin-American Workshop, 2002, Montevideu. Proceedings, 2002. v. 1. p. 76-81.
-
COTA, Erika ; CARRO, L. ; ORAILOGLU, A. ; LUBASZEWSKI, Marcelo . Generic and Detailed Search for TAM Definition in Core-based Systems. In: LaTW 2002 - 3rd IEEE Latin-American Workshop, 2002, Montevideu. Proceedings, 2002. v. 1. p. 160-164.
-
ZEFERINO, Cesar ; KREUTZ, Marcio ; CARRO, L. ; SUSIN, Altamiro Amadeu . Models for Comunication Tradeoffs on Systems-on-Chip. In: International Workshop on IP-Based SOC Design, IFIP WG 10.5, 2002, Grenoble. Proceedings, 2002. v. 1. p. 395-400.
-
CORTES, Fernando Paixão ; CARRO, L. ; GIRARDI, A. ; SUSIM, Altamiro . A Sigma-delta AD converter insensitive to SEU effects. In: 8th IEEE International ON-line Testing Workshop, 2002, Isle of Bendor. 8th IEEE International ON-line Testing Workshop. Los Alamitos: IEEE Computer Society Press, 2002. v. 1. p. 89-93.
-
NEGREIROS, Marcelo ; CARRO, L. ; SUSIM, Altamiro . An All Digital On-LIne Analog Test. In: 8th IEEE International ON-line Testing Workshop, 2002, Isle of Bendor. 8th IEEE International ON-line Testing Workshop. Los Alamitos: IEEE Computer Society Press, 2002. v. 1. p. 79-83.
-
FLORES, M G C ; CARRO, L. . Noise-based testing system for AD converters. In: TTTC 8th International Mixed-Signal Testing Workshop, 2002, Montreaux. TTTC 8th International Mixed-Signal Testing Workshop, 2002. v. 1. p. 181-189.
-
BETAT, O. ; CARRO, L. . Comparison of Digital Linearization Methods for Sensor Interfaces. In: ISCAS 2002 - International Symposium on Circuits and Systems, 2002, Scottsdale, Arizona. Proceddings. Los Alamitos: IEEE Computer Society Press, 2002. v. V. p. 429-433.
-
COTA, Erika ; CARRO, L. ; ORAILOGLU, A. ; LUBASZEWSKI, Marcelo . Test Planning and Design Space Exploration in a Core-basedEnvironment. In: DATE 2002 , Design Automation and Test in Europe, 2002, Paris. Proceedings. Los Alamitos: IEEE Computer Society Press, 2002. v. 1. p. 478-485.
-
LIMA, Fernanda ; CARRO, L. ; VELAZCO, R. ; REIS, Ricardo . Injecting Multiple Upsets in a SEU Tolerant 8051 Micro-Controller. In: LATW 2002 - 3rd IEEE Latin-American Workshop, 2002, Montevideu. Proceedings, 2002. v. 1. p. 120-125.
-
SOUZA JR, A. ; NEGREIROS, Marcelo ; CARRO, L. ; SUSIM, Altamiro . A Complex Adaptive Signal Processing for Analog Testing. In: LATW 2002 - 3rd IEEE Latin-American Workshop, 2002, Montevideu. Proceedings, 2002. v. 1. p. 166-173.
-
ZEFERINO, Cesar Albenes ; KREUTZ, M e ; CARRO, L ; SUZIM, A A . A study on communication issues for systems-on-chip. In: Proceedings of the 15th symposium on Integrated circuits and systems design, 2002. SBCCI: Proceedings of the 15th symposium on Integrated circuits and systems design. Los Alamitos California: IEEE Computer Society Press, 2002. v. 1. p. 121-127.
-
HENTSCHKE, R ; MARQUES, F ; LIMA, F. G. ; CARRO, L ; SUZIM, A ; REIS, R . Analysing area and performance penalty of protecting different digital modules with hamming code and triple modular redundancy. In: SBCCI:, 2002. proceedings of the 15th symposium on integrated circuits and systems. Los Alamitos California: IEEE Computer Society Press, 2002. v. 1. p. 95-101.
-
NEGREIROS, M ; CARRO, L ; SUSIN, Altamiro Amadeu . A statistical sampler for a new on-line analog test method. In: International On-Line Testing Workshop, 2002, Isle Bendor. Proceedings of The Eighth IEEE International On-Line Testing Workshop (IOLTW'02). Los Alamitos: IEEE Computer Society Press, 2002. v. 1. p. 79-85.
-
CARRO, L. ; NACUL, A. ; JANNER, A. ; LUBASZEWSKI, Marcelo . Built-in Test of Analog Non-linear Circuits in a SOC environment. In: 9th IFIP VLSI-SOC'01, 2001, Montpellier. Built-in test of analog non- linear circuits in a SOC environment, 2001. p. 353-358.
-
LIMA, F. G. ; REZGUI, S. ; CARRO, L. ; VELAZCO, R. ; REIS, Ricardo . On the Use of VHDL Simulation and Emulation to Derive Error Rates. In: RADECS 2001, 2001, Grenoble. On the Use of VHDL Simulation and Emulation to Derive Error Rates, 2001.
-
CASSOL, L. ; BETAT, O ; CARRO, L. ; LUBASZEWSKI, Marcelo . The Sigma-Delta-Bist Method Applied to Linear Analog Circuits. In: 2nd IEEE Latin-American Test Workshop, 2001, Cancun. The Sigma-Delta-Bist Method Applied to Linear Analog Circuits. Los Alamitos: IEEE Computer Society Press, 2001. p. 126-130.
-
CARRO, L. ; COTA, Erika ; LUBASZEWSKI, Marcelo ; BERTRAND, Y. ; AZAIS, F. ; RENOVELL, M. . TI-BIST: A Temperature Independent Analog BIST for Switched-Capacitor Filters. In: IEEE Asian Test Symposium , ATS 2000, 2001, Taipei. TI-BIST: A Temperature Independent Analog BIST for Switched-Capacitor Filters. Los Alamitos: IEEE Computer Society Press, 2000. p. 78-83.
-
NACUL, A. ; CARRO, L. ; JANNER, A. ; LUBASZEWSKI, Marcelo . A BIST Procedure for Analog Mixers in Software Radio. In: SBCCI 2001, 2001, Brasilia. A BIST Procedure for Analog Mixers in Software Radio. Los Alamitos: IEEE Computer Society Press, 2001. v. 1. p. 103-108.
-
CARRO, L. ; WAGNER, Flavio ; KREUTZ, Marcio ; OYAMADA, M. . A Design Methodology for Embedded Systems Based on MUltiple Processors. In: DIPES 2001; IFIP WG10.3/WG10.4/WG10.5 Workshop on Distributed and Parallel Embedded Systems, 2001, Paderbon. Proceddings. Boston, USA: KLuwer Academic Publishers, 2001. p. 33-42.
-
COTA, Érika ; CARRO, L. ; LUBASZEWSKI, Marcelo . An Effective Test Method for Digital Neural Networks. In: IEEE Internacional Joint INNS-IEEE Conference on Neural Networks, 2001, Washington. An Effective Test Method for Digital Neural Networks, 2001.
-
COTA, Érika ; BRISOLARA, Lisane ; CARRO, L. ; LUBASZEWSKI, Marcelo ; SUZIM, A. . MET: A Microprocessor for Embedded Test. In: 5th IEEE International Workshop on Testing Embedded Core-based Systems, 2001, Marina Del Rey. MET: A Microprocessor for Embedded Test. Los Alamitos: IEEE Computer Society Press, 2001.
-
KREUTZ, Marcio ; CARRO, L. ; ZEFERINO, Cesar ; SUZIM, A. . Communication Architectures for System-on-Chip. In: SBCCI 2001, 2001, Brasilia. Communication Architectures for System-On-Chip. Los Alamitos: IEEE Computer Society Press, 2001. v. 1. p. 14-19.
-
COTA, Érika ; CORTES, Fernando Paixão ; CARRO, L. ; BAMPI, Sergio . Modeling of Short Circuit Power Consumption Using Timing-only Logic Cell Macromodels. In: SBCCI 2000, Symposium on Integrated Circuits and Systems Design, 2001, Manaus. Modeling of Short Circuit Power Consumption Using Timing-only Logic Cell Macromodels. Los Alamitos: IEEE Computer Society Press, 2001. v. 1. p. 222-227.
-
NACUL, Andre ; CARRO, L. ; JANNER, A. . Testing of RF Mixers with Adaptive Filters. In: IEEE IMSTW 2001, International Mixed-Signal Test Workshop, 2001, Atlanta, GA. Proceddings, 2001. v. 1. p. 77-83.
-
COTA, Erika ; CARRO, L. ; LUBASZEWSKI, Marcelo . A Test Method fot Digital Signal Processors. In: 2nd IEEE Latin-American Test Workshop, 2001, Cancun. Proceddings. Los Alamitos: IEEE Computer Society Press, 2001. p. 214-219.
-
ITO, S. ; CARRO, L. ; JACOBI, R. . System Design Based on Single Language and Single-Chip JAVA ASIP Microcontroller. In: Date- Design, Automation and Test in Europe, 2000, Paris. DATE Conference 2000 proceedings. Los Alamitos, California: IEEE Computer Society Press, 2000. v. 1. p. 703-707.
-
CARRO, L. ; KREUTZ, Marcio ; WAGNER, Flávio ; OYAMADA, M. . System Synthesis for Multiprocessor Embedded Applications. In: DATE2000 - Design, Automation and Test in Europe, 2000, Paris. DATE-Conference proceedings. Los Alamitos, California: IEEE Computer Society Press, 2000. v. 1. p. 697-702.
-
COTA, Erika ; CARRO, L. ; LUBASZEWSKI, Marcelo ; VELAZCO, R. ; REZGUI, S. . Synthesis of a 8051-Like Microcontroller Tolerant to Transient Faults. In: 1st Latin-American Test Workshop, 2000, Rio de Janeiro. LATW2000. Los Alamitos, California: IEEE Computer Society Press, 2000. p. 134-139.
-
CARRO, L. ; AGOSTINI, L. ; PACHECO, R. ; LUBASZEWSKI, Marcelo . Using reconfigurability to break down test costs: a case study. In: 1st Latin-American Test Workshop, 2000, Rio de Janeiro. LATW2000. Los Alamitos, California: IEEE Computer Society Press, 2000. p. 209-214.
-
CARRO, L. ; ITO, S. A. ; MATTOS, Julio . A Comparison of OO and Reactive Based Specifications on the Design of Embedded Systems. In: Symposium on Integrated Circuits and Systems Design, 13, 2000, Manaus. A Comparison of OO and Reactive Based Specifications on the Design of Embedded Systems. Los Alamitos: IEEE Computer Society, 2000. v. 1. p. 391-396.
-
CARRO, L. ; COTA, Erika ; LUBASZEWSKI, Marcelo ; BERTAND, Y. ; AZAIS, F. ; RENOVELL, M. . A Temperature Independent Analog BIST for Switched-Capacitor Filters. In: ATS 2000, IEEE Asian Test Sysmposium, 2000, Taipei. Proceddings. Los Alamitos: IEEE Computer Society Press, 2000. p. 78-83.
-
FRANCO, D. ; CARRO, L. . FPGA architecture comparison for non-conventional signal processing. In: IEEE-INSS-ENNS Internation Joint Conference on Neural Networks, 2000, Como, 2000.
-
CARRO, L. ; SOUZA JR, Adão de ; NEGREIROS, Marcelo ; JAHN, G. ; FRANCO, D. . Non-linear components for mixed circuits analog front-end. In: Design, Automation and test in Europe, 2000, Paris. DATE-Conference. Los Alamitos, Californa: IEEE Computer Society Press, 2000. v. 1. p. 544-549.
-
COTA, Erika ; CARRO, L. ; RENOVELL, M. ; LUBASZEWSKI, Marcelo ; BERTRAND, Y. ; AZAIS, F. . Reuse of existing resources for analog BIST of a Swithing capacitor filter. In: DATE2000-Design, Automation and Test in Europe, 2000, Paris. DATE Conference 2000 - proceedings. Los Alamitos, California: IEEE Computer Society Press, 2000. v. 1. p. 226-230.
-
VARGAS, H. ; MACHADO, R. ; CARRO, L. . Virtual-Real Lab: An Electronics laboratory using real devices and the Internet. In: M/SET 2000, Mathematics, Science and Education and Technology, 2000, San Diego. International Conference on M/SET 2000, Mathematics, Science and Education and Technology. Charlottesville, VA: AACE: Association for the Advancement of Computing in Education, 2000. v. 1.
-
CARRO, L. ; RENOVELL, M. ; COTA, Erika ; LUBASZEWSKI, Marcelo ; BERTRAND, Y. ; AZAIS, F. . On the Temperature Dependencies of Analog Bist. In: 1st Latin-American Test Workshop, 2000, Rio de Janeiro. LATW2000. Los Alamitos, Californa: IEEE Computer Society Press, 2000. p. 88-94.
-
CARRO, L. ; COTA, Érika ; LUBASZEWSKI, Marcelo ; BERTRAND, Y. ; AZAÏS, F. ; RENOVELL, M. . TI-BIST: A temperature Independent Analog BIST for Switched-Capacitor filters. In: Asian Test Symposium, 2000, Taipei. ATS Proceedings. Los Alamitos: IEEE Computer Society, 2000.
-
CARRO, L. ; ITO, S. A. . A Comparison of Microcontrollers Targeted to FPGA-based Embedded Applications. In: Symposium on Integrated Circuits and Systems Design, 13, 2000, Manaus. A Comparison of Microcontrollers Targeted to FPGA-based Embedded Applications. Los Alamitos: IEEE Computer Society, 2000. v. 1. p. 397-402.
-
COSTA, E. ; CORTES, Fernando Paixão ; CARDOSO, R. ; CARRO, L. ; BAMPI, Sergio . Modeling of Short Circuit Power Consumption Using Timing-Only Logic Cell Macromodels. In: Symposium on Integrated Circuits and Systems Design, 13, 2000, Manaus. Proceedings. Los Alamitos: IEEE Computer Society, 2000.
-
LIMA, F. G. ; COTA, Érika ; CARRO, L. ; REZGUI, S. ; VELAZCO, R. ; LUBASZEWSKI, Marcelo ; REIS, Ricardo . Designing a Radiation Hardened 8051-like Micro-Controller. In: Symposium on Integrated Circuits and Systems Design, 2000, Manaus. Proceedings. Los Alamitos: IEEE Computer Society Press, 2000.
-
NEGREIROS, Marcelo ; CARRO, L. . Energy Quality Measurement ith High Linearity. In: INUSCON 2000, 2000, Porto Alegre. Proceddings, 2000. v. 2. p. 647-649.
-
WAGNER, Flávio ; OYAMADA, M. ; CARRO, L. ; KREUTZ, Marcio . Object-Oriented Modeling and Co-Simulation of Embedded Systems. In: VLSI99 proceedings, 1999, Lisboa. VLSI: Systems on a Chip, 1999. v. 1. p. 439-446.
-
LIMA, Fernanda ; JOHANN, M. ; GUNTZEL, J. ; AVILA, E. D. ; CARRO, L. ; REIS, Ricardo . Designing a Mask Programmable Matrix for Sequential Circuits. In: VLSI99, 1999, Lisboa. IFIP VLSI: Systems on a Chip, 1999. v. 1. p. 497-508.
-
COTA, Erika ; NEGREIROS, Marcelo ; CARRO, L. ; LUBASZEWSKI, Marcelo . A new adaptive analog test and diagnosis system. In: IEEE IMTC 1999, 1999, Veneza. IEEE Intrumentation and Measurement Technology Conference, 16th, proceedings. Piscataway, NJ: ieee Measurement and Instrumentation Society, 1999. v. 1. p. 1397-1402.
-
CARRO, L. ; ITO, S. ; JACOBI, R. . Designing a Java Microcontroller to Specific Applications. In: SBCCI99, 1999, Natal. SBCCI99 - proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1999. p. 12-15.
-
CARRO, L. . Circuit-level Considerations for Mixed Signal programmable Components. In: Simpósio Brasileiro de Concepção de Ciruictos Integrados, 1999, Natal. IEEE SBCCI99. Los Alamitos, CA: IEEE Computer Society Press, 1999. v. 1. p. 106-109.
-
LIMA, Fernanda ; JOHANN, M. ; GUNTZEL, J. ; CARRO, L. ; REIS, Ricardo . A Tool for Analysis of Universal Logic Gates Functionality. In: Simpósio Brasilero de Concepção de Circuitos Integrados, 1999, Natal. IEEE SBCCI99. Los Alamitos, CA: IEEE Computer Society Press, 1999. v. 1. p. 184-187.
-
MATTOS, Julio ; FRANCO, D. ; CARRO, L. ; SUZIM, A. . MOVE architecture applied to DSP. In: International conference on microelectronics and packaging, 1999, Campinas. International conference on microelectronics and packaging, 1999. v. 1. p. 180-184.
-
ITO, S. A. ; CARRO, L. ; JACOBI, R. . Issues on Designing Embedded Applications Targeted to a JAVA Microcontroller. In: International conference on microelectronics and packaging, 1999, Campinas. International conference on microelectronics and packaging. p. 180-184.
-
CARRO, L. ; LIMA, Fernanda ; GUNTZEL, J. ; JOHANN, M. ; REIS, Ricardo . Designing mask programmable ULGs for MPGAs. In: V Workshop Iberchip, 1999, Lima. V Workshop Iberchip, memórias, 1999. p. 91-99.
-
FRANCO, D. ; CARRO, L. ; SUZIM, A. . Comparação de multiplicadores em FPGA. In: V workshop Iberchip, 1999, Lima. V Workshop Iberchip, memorias, 1999. p. 188-195.
-
ITO, S. A. ; SUZIM, A. ; CARRO, L. ; JACOBI, R. . Implementação de uma máquina JAVA. In: V workshop Iberchip, 1999, Lima. V workshop Iberchip-memorias, 1999. p. 252-260.
-
COTA, Erika ; CARRO, L. ; LUBASZEWSKI, Marcelo . A method to diagnose faults in Linear Analog Circuits using an Adaptive tester. In: DATE 1999, Design Automation and Test in Europe, 1999, Munique. DATE 1999 Conference proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1999. v. 1. p. 184-188.
-
CARRO, L. ; FRANCO, D. . A FPGA version of a Non-Linear Adaptive Filter. In: Simpósio Brasileiro de Concepção de Circuitos Integrados, 1999, Natal. IEEE SBCCI99, 1999. v. 1. p. 128-131.
-
CARRO, L. ; KREUTZ, Marcio ; WAGNER, Flávio ; OYAMADA, M. . System Synthesis and Processor Selection in the S3E2S Environment. In: Simpósio Brasileiro de Conceoção de Circuitos Integrados, 1999, Natal. IEEE SBCCI99. Los Alamitos, CA: IEEE Computer Society press, 1999. v. 1. p. 146-149.
-
COTA, Erika ; KRUG, M. ; LUBASZEWSKI, Marcelo ; CARRO, L. ; SUZIM, A. . Implementing a Self-Testing 8051 Microprocessor. In: Simpósio Brasileiro de Concepção de Circuitos integrados, 1999, Natal. IEEE SBCCI99. Los Alamitos, CA: IEEE Computer Society Press, 1999. v. 1. p. 202-205.
-
FRANCO, D. ; CARRO, L. ; SUZIM, A. . A comparison of adaptive filters in FPGA. In: International conference on microelectronics and packaging, 1999, Campinas. International conference on microelectronics and packaging, 1999. v. 1. p. 53-57.
-
COTA, Erika ; KRUG, M. ; SUZIM, A. ; CARRO, L. ; LUBASZEWSKI, Marcelo . Auto-Teste do Microprocessador 8051. In: V workshop Iberchip, 1999, Lima. V workshop Iberchip - memorias, 1999. p. 188-195.
-
COSTA, E. ; SUZIM, A. ; ROEHE, E. ; CARRO, L. ; BAMPI, Sergio . Comparação de velocidade e potência de circuitos multiplicadores CMOS. In: V workshop Iberchip, 1999, Lima. V workshop Iberchip - memorias, 1999. p. 230-237.
-
ZEFERINO, Cesar ; CARRO, L. ; SUZIM, A. . Projeto em VHDL de uma rede de conexão experimental. In: V workshop Iberchip, 1999, Lima. V workshop Iberchip-memorias, 1999. p. 277-284.
-
CARRO, L. ; NEGREIROS, Marcelo . Efficient Analog test Methodology Based on Adaptive Algorithms. In: DAC 1998, Design Automation Conference, 1998, San Francisco. Design Automation Conference, proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1998. v. 1. p. 32-37.
-
CARRO, L. ; BEGO, L. . Low ringing I/O buffer design. In: ISCAS 1998 - International Simposium on Circuits and Systems, 1998, Monterey. ISCAS 98 proceedings. Los Alamitos, CA: IEEE Circuits and Systems Society, 1998.
-
LIMA, Fernanda ; CARRO, L. ; GUNTZEL, J. ; JOHANN, M. ; REIS, Ricardo . Improving logic density of QCL masterslices by using universal logic gates. In: Simposio Brasileiro de Concepcao de Circuitos Integrados, 1998, Buzios - Rio de Janeiro. SBCCI98. Los Alamitos, CA: IEEE Computer Society Press, 1998. p. 204-207.
-
JAHN, G. ; CARRO, L. . Sensor and Amplifier non-linear characteristics linearization. In: Congresso da Sociedade Brasilera de Microeletronica, 1998, Curitiba. International Conference on Microelectronics ans Packaging 98, 1998. p. 275-282.
-
GONÇALVES, L. ; CARRO, L. . Prototipação de instrumento digital com FPGA. In: IV workshop Iberchip, 1998, Mar del Plata. IV workshop Iberchip-memorias. Mar del Plata: Universidad Nacional de La Plata, Faculdad de Ingenieria, 1998. p. 302-395.
-
JAHN, G. ; CARRO, L. . A non-linear adaptive flter for sensor and amplifier linearization. In: Simposio Brasileiro de Concepcao de Circuitos Integrados, 1998, Buzios, Rio de Janeiro. SBCCI98. Los Alamitos, CA: IEEE Computer Society Press, 1998. p. 167-170.
-
CARRO, L. ; JAHN, G. . Compensação de circuitos analógicos e não-lineares por método digital. In: IV workshop Iberchip, 1998, Mar del Plata. IV workshop Iberchip - memorias. Mar del Plata: Iniversidade Nacional de La Plata, Faculdad de Ingenieria, 1998. p. 67-76.
-
LIMA, Fernanda ; GUNTZEL, J. ; JOHANN, M. ; CARRO, L. ; REIS, Ricardo . On the Applicability of Universal Logic Gates for designing Mask Programmable Architectures. In: IV workshop Iberchip, 1998, Mar del Plata. IV workshop Iberchip - memorias. Mar del Plata: Universidad Nacional de La Plata, faculdad de Ingenieria, 1998. p. 110-119.
-
CARRO, L. ; APARICIO, R. ; CEBALLOS, J. ; GUERRERO, M. ; ZEPEDA, H. ; JOHANN, M. ; FINCO, S. . GAAL-Gate Array configurado por un nivel de metal utilizando una tecnologa 2.5 micra del CNM. In: IV workshop Iberchip, 1998, Mar del Plata. IV workshop Iberchip-memorias. Mar del Plata: Universidad Nacional de La Plata, Faculdad de Ingenieria, 1998. p. 261-267.
-
NEGREIROS, Marcelo ; CARRO, L. . A comparison of Adaptive Algorithms Applied to Analog Circuit Testing. In: XII Congresso da Sociedade Brasileira de Microeletrônica, 1997, Caxambu-MG. XII Congresso da Sociedade Brasileira de Microeletrônica, 1997.
-
SOUZA JR, Adão de ; PARISOTO, A. ; PONTREMOLI, M. ; PEREIRA, Carlos ; CARRO, L. ; SUZIM, A. . Design Alternatives in F-Timer: ASIC to real time systems support. In: III Workshop Iberchip, 1997, Ciudad del Mexico. III Workshop Iberchip-memorias, 1997. p. 209-217.
-
NEGREIROS, Marcelo ; CARRO, L. . On-line testing of analog circuits by adaptive filters. In: IFIP VLSI 97, 1997, Gramado. IFIP Internation Conferecen on Very large Scale Integration. London: Chapman & Hall, 1997. p. 53-64.
-
CARRO, L. ; KAISER, G. ; GONÇALVES, P. ; SUZIM, A. . Noise and Power Programmability in Semi-Custom I/O Buffers. In: IFIP VLSI97, 1997, Gramado. IFIP International Conference on Very Large Scale Integrated Circuits. London: Chapman & Hall, 1997. p. 177-186.
-
CARRO, L. ; NEGREIROS, Marcelo . Adaptive Plant Recognition applyed to Analog Circuit testing. In: IEEE International Mixed Signal Testing Workshop, 1997, Seattle. IEEE International Mixed Signal Testing Workshop - proceedings. Los Alamitos, CA: IEEE Computer Society, 1997. p. 134-143.
-
KREUTZ, Marcio ; CARRO, L. ; SUZIM, A. . System Integration with Dedicated Processor for Industrial Applications. In: IFAC Symposium on Intelligent Components and Instrumentation for Control Applications, 1997, Annecy. SISICA 97 - proceedings, 1997. p. 333-337.
-
PARISOTO, A. ; SOUZA JR, Adao de ; CARRO, L. ; PONTREMOLI, M. ; PEREIRA, Carlos ; SUZIM, A. . F-Timer: Dedicated FPGA to Real-Time Systems Design Support. In: IX Euromicro Workshop on Real-Time Systems, 1997. IX Euromicro Workshop on Real-Time Systems - proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1997. p. 35-40.
-
CARRO, L. ; KREUTZ, Marcio ; SUZIM, A. . A system design methodology with dedicated controllers and compilers. In: Simposio Brasileiro de concepcao de circuitos integrados, 1997, Gramado-RGS. SBCCI97, 1997. p. 97-104.
-
SOUZA JR, Adão de ; NARDI, G. ; CARRO, L. ; JACOBI, R. . Synthesis of Profibus Protocol using Graph_FSM. In: Simposio Brasileiro de Concepcao de Circuitos Integrados, 1997, Gramado-RGS. SBCCI97, 1997. p. 31-37.
-
JOHANN, M. ; CARRO, L. ; REIS, Ricardo . Functional Design of Garota: gate array router of Agata System. In: Simposio Brasileiro de Concepcao de Circuitos Integrados, 1997, Gramado-RGS. SBCII97, 1997. p. 21-30.
-
CARRO, L. ; PEREIRA, G. ; SUZIM, A. . Prototyping and Re-engineering of Microcontroller-based systems. In: 7th International Workshop on Rapid Systems Prototyping, 1996, Porto Carras. IEEE 7th International Workshop on Rapid Systems Prototyping - proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1996. p. 178-182.
-
CARRO, L. ; ALBA, C. ; SUZIM, A. . Embedded Systems Design with Frontend Compilers. In: IEEE International Conference on Computer Design, 1996, Austin, Texas. IEEE International Conference on Computer Design, VLSI in Computers and Processors. Los Alamitos, CA: IEEE Computer Society Press, 1996. p. 200-205.
-
CARRO, L. ; PEREIRA, G. ; ALBA, C. ; SUZIM, A. . System Design using ASIPs. In: IEEE Symposium on Engineering of Computer Based Systems, 1996, Friedrichshafen. IEEE Symposium on Engineering of Computer Based Systems - proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1996.
-
CARRO, L. ; SUZIM, A. . A RISC Architecture to explore HW/SW parallelism in HW/SW codesign. In: IEEE International Symposium on Engineering of Computer-Based Systems, 1996, Friedrichshafen. IEEE International Symposium on Engineering of Computer-Based Systems - proceedings. Los Alamitos, CA: IEEE Computer Society Press, 1996.
-
LISBÔA, Carlos Arthur Lang ; CARRO, L. . An intrinsically robust technique for fault tolerance under multiple upsets. In: 10th IEEE International On-Line Testing Symposium, 2004, Ilha da Madeira. Proceedings, 2004. v. 1. p. 1-1.
-
LIMA, F. G. ; CARRO, L. ; COTA, Érika ; LUBASZEWSKI, Marcelo ; VELAZCO, R. ; REZGUI, S. ; REIS, Ricardo . Designing and Testing a Radiation Hardened 8051-like Micro-controller. In: Military and Aerospace Applications of Programmable Devices and Technologies International Conference, 3, 2000, Maryland. Conference Proceedings, 2000.
-
CARRO, L. ; GAYDADJIEV, G. . Tutorial: Challenges for embedded multicore architectures. 2010. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. ; BECK, Antonio Carlos S . Tutorial: Adaptability: the key for future embedded systems. 2010. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. . Tutorial: Reconfigurable hardware. 2010. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. . Why FPGAs should have binary compatibility. 2010. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. ; LISBÔA, Carlos Arthur Lang . Tutorial: New Challenges for Designers of Fault Tolerant Embedded Systems based on future technologies. 2009. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. ; BECK FILHO, Antonio Carlos . Tutorial: Adaptability: the key for future embedded systems. 2009. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. ; WAGNER, Flavio Rech . Tutorial: Embedded Software Design Space Exploration and automation using UML-based tools. 2007. (Apresentação de Trabalho/Conferência ou palestra).
-
CARRO, L. . Adding value to design and test through education: what are the challenges. Los Alamitos - California: IEEE, 2005 (Artigo discussão cinetífica e educacional).
-
BETAT, O ; CASSOL, Leandro ; CARRO, L. ; LUBASZEWSKI, Marcelo . Estudo de Filtragem adaptativa utilizando modulação Sigma-Delta.. Departamento de Engenharia Elétrica e Pós de Engenharia Elétrica, 2002 (Monografia).
-
CASSOL, Leandro ; BETTAT, O ; CARRO, L. ; LUBASZEWSKI, Marcelo . Um método Sigma-Delta-Bist aplicado a circuitos analógicos lineares. Porto Alegre: Departamento de Engenharia Eletrica e Pós Graduação em Eng. Elétrica, 2001 (Monografia).
-
MATTOS, Julio ; CARRO, L. ; SUZIM, A. . Projeto da Máquina MOVE. Porto Alegre: CPGCC-UFRGS, 1999 (Monografia).
-
ITO, S. ; CARRO, L. ; SUZIM, A. . Implementação de uma máquina Java. Porto Alegre: CPGCC-UFRGS, 1999 (Monografia).
-
CARRO, L. . Arquiteturas e Suporte para Sistemas Eletrônicos Programáveis. Porto Alegre: PPGCC-UFRGS, 1999 (Monografia).
-
CARRO, L. . Applicatiopn Specific Systems Design and Prototyping. Sao Paulo: SBMICRO, 1998 (Tutorial).
-
FRANCO, D. ; CARRO, L. ; SUZIM, A. . Um estudo comparativo de multiplicadores em FPGA. Porto Alegre: CPGCC-UFRGS, 1998 (Monografia).
-
COTA, Erika ; KRUG, M. ; SUZIM, A. ; CARRO, L. ; LUBASZEWSKI, Marcelo . Auto-teste do microprocessador 8051. Porto Alegre: CPGCC-UFRGS, 1998 (monografia).
-
FINCO, S. ; CARRO, L. . Matriz Gate Array Cmos GA2500 e Projeto Ágata. Campinas: Unicamp, 1996 (Tutorial).
-
CARRO, L. ; SUSIN, Altamiro . Metodologia em Concepção de circuitos Integrados. Relatorio de Pesquisa RP87 - CPGCC, 1996 (Monografia).
-
CARRO, L. . Discussão Informal sobre um Sistema Especialista para Concepção de Circuitos Integrados com Arquitetura Pré-Definida. Relatório de pesquisa RP82 - CPCCC/UFRGS, 1987 (Monografia).
-
CARRO, L. . Desenvolvimento e caracterização de uma Biblioteca de standard cell. Relatório de Pesquisa RP81, CPGCC/UFRGS, 1987 (Monografia).
Outras produções
CARRO, L. ; LIMA, A. ; VARGAS, H. . Osciloscópio Digital com Sound Blaster. 1998.
CARRO, L. ; JOHANN, M. ; MACHADO, R. . Ágata: Ferramenta de Projeto para Gate Array Nacional. 1998.
CARRO, L. ; BARONE, A. ; TALIERCIO, M. ; CAPOCELLI, P. ; VARAMBALLY, R. . Memória CMOS. 1995.
CARRO, L. . Parecer para projeto RHAE. 1999.
CARRO, L. . Mepsi, circuito integrado para medição de energia com harmonicas. 1999.
CARRO, L. ; Martino, J. . Jounal of Integrated Systems. 2007. (Editoração/Periódico).
CARRO, L. ; Flottes, M.L. . Visiting Researcher. 2006. (Professor visitante).
CARRO, L. ; BECK, Antonio C ; GOMES, Victor F . Sistemas Embarcados e VHDL. 2006. (Professor visitante).
CARRO, L. . Projeto e prototipação de sistemas digitais. 2005. (Professor visitante).
CARRO, L. ; FABRIS, Eric . Curso de Conversores AD. 2005. (Professor visitante).
CARRO, L. ; SILVEIRA, F. . Curso de Sistemas Digitais Complexos. 2004. (Professor visitante).
CARRO, L. . Projeto de sistemas digitais. 2003. (Professor visitante).
BARONI, A. ; MASTRODOMENICO, G. ; TALIERCIO, M. ; CAPOCELLI, P. ; CARRO, L. ; VARAMBALLY, R. . United States Patent 5,471,428. 1995. (Patente).
CARRO, L. ; ABADIR, Magdy ; ZORIAN, Yervant ; DUENAS, Cesar . Test Economics of Large and/or Analog Designs: Industrial Constraints and Research Solutions. 2003 (Demais trabalhos relevantes) .
CARRO, L. . Aspectos de Teste de SOCs. 2002 (Cursos Ministrados) .
CARRO, L. . Application Specific Systems Design and Prototyping. 1998 (Cursos Ministrados) .
CARRO, L. ; REIS, Ricardo ; KINDEL, M. . Projeto de Circuitos Integrados. 1997 (Cursos Ministrados) .
CARRO, L. . Síntese com FPGAs. 1997 (Cursos Ministrados) .
CARRO, L. ; FINCO, S. . Projeto de CIs com Gate Array Nacional. 1996 (Cursos Ministrados) .
Projetos de pesquisa
-
2011 - 2013
Loreley, Descrição: Este projeto contempla a mobilidade científica entre pesquisadores da TU-Delft, do Poltecnico de Torino e do Inf-UFRGS para realização de cursos e pesquisas conjuntas, num período de 3 anos, financiado pela EU.. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Mestrado acadêmico: (2) / Doutorado: (2) . , Integrantes: Luigi Carro - Coordenador / M Sonza Reorda - Integrante / Stephan Wong - Integrante.
-
2010 - 2012
ERA - Embedded Reconfigurable Architectures, Descrição: Em um cenário de complexidade e diversidade crescentes para os sistemas embarcados, há cada vez mais pressão por baixos tempos de desenvolvimento aliado a circuitos de alto desempenho. O foco deste projeto é a pesquisa sobre o desenvolvimento de futuras plataformas adaptativas. A idéia central é suportar uma metodologia estruturada de projeto, onde necessidades que eventualmente surjam ao longo da vida útil de um produto sejam satisfetitas pela reconfiguração do mesmo em diversos níveis de abstração e através de diversos comnponentes (processador, memória e estrutura de comunicação).. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (3) / Mestrado acadêmico: (2) / Doutorado: (1) . , Integrantes: Luigi Carro - Coordenador / Antonio Carlos S Beck - Integrante / Erika F Cota - Integrante / Alexandre Ambrozi Junqueira - Integrante / Mateus Beck Rutzig - Integrante., Financiador(es): União Européia - Auxílio financeiro.
-
2010 - 2012
BioModelos - Modelagem Computacional de Sistemas Biológicos, Descrição: O objetivo deste projeto é a construção e validação de diferentes modelos de processos biológicos, permitindo a análise e previsão das reações que ocorrem em máquinas biológicas. Isso permitirá que as interferências realizadas pelo homem ocorram de forma muito mais controlada e previsível, como hoje em dia ocorre quando se manipulam modelos de máquinas baseadas em silício. Além disto, com a disponibilidade de modelos nos graus de abstração e precisão adequados, a simulação de rotas e reações permitirá uma aceleração no desenvolvimento das pesquisas bioquímicas, com evidentes ganhos de produtividade. O objetivo deste projeto é portanto a construção e validação de uma pilha de abstrações de modelos de processos biológicos. Além disso, serão investigadas técnicas de análise e previsão das reações que ocorrem em máquinas biológicas, mas em diferentes níveis de abstração. Isso permitirá que as interferências realizadas pelo homem ocorram de forma muito mais controlada e previsível, como correntemente manipulam-se os modelos de máquinas baseadas em silício. Com a disponibilidade de modelos nos graus de abstração e precisão adequados, a simulação de rotas e reações permitirá uma aceleração no desenvolvimento das pesquisas bioquímicas, com evidentes ganhos de produtividade.. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (3) . , Integrantes: Luigi Carro - Coordenador / Flávio Rech Wagner - Integrante / Leila Ribeiro - Integrante., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro.
-
2009 - 2011
Especificação e desenvolvimento de software embarcado para baixo consumo de potência, Descrição: Tecnicas que possam diminuir a potência do software embarcado, mas mantenham a qualidade do mesmo devem ser desenvolvidas, tendo em vista a crescente pressão dos custos de desenvolvimento e a importância do software embaracdo.. , Situação: Em andamento; Natureza: Pesquisa. , Integrantes: Luigi Carro - Coordenador / Flavio Rech Wagner - Integrante / Luis da Cunha Lamb - Integrante.
-
2009 - 2010
Localização de Falhas em Redes Subterrâneas, Descrição: O objetivo principal do projeto é o estudo e desenvolvimento de um protótipo para localização do ponto exato de falha (curto) no sistema elétrico subterrâneo. Atualmente, esta localização toma tempo significativo, medida até em dias. Evidentemente, existem alimentadores alternativos (backup). Contudo, por todo o tempo que o defeito não for localizado, existe uma probabilidade de uma segunda falha, o que provocaria o desligamento da rede sem nenhum alimentador reserva. Ao reduzir-se o tempo de busca do ponto de defeito, diminui-se significativamente a probabilidade de um colapso (blackout) pela sucessão de falhas (falta de reservas suficientes). Consequentemente, central a melhoria da qualidade de serviço encontra-se a busca rápida do ponto de defeito. A distribuição de energia do bairro Centro ao Praia de Belas é feita por cabos subterrâneos. A cada 50-100 metros existem caixas a 2 metros de profundidade, onde a conexão pode ser monitorada. Defeitos nos cabos são manifestados como a ruptura do dielétrico entre fase e terra, provocando um curto. Presentemente, a localização do defeito envolve uma equipe procurando o ponto provável. Como os canos são subterrâneos, é muito comum que a inspeção de uma caixa envolva a remoção de água, e isto deve ser repetido até que se localize a caixa onde ocorreu a falha. Com a moderna tecnologia de sensores, e com a possibilidade de colocação de processadores digitais de baixo custo em cada cabo, é patente que uma rede de sensores de baixo custo poderia ser coloca junto com as instalações, de maneira a comunicar o ponto de defeito, otimizando o trabalho da equipe de manutenção. Central ao conceito deste projeto encontra-se a idéia de desenvolvimento de uma rede integrada de sensores de baixo custo, capaz de monitorar o comportamento dos cabos subterrâneos, e avisar a um concentrador os pontos que devem ser monitorados. Este projeto descreve as atividades envolvidas no curto e longo prazo, de maneira a se obter este tipo de monito. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Especialização: (0) / Mestrado acadêmico: (1) / Mestrado profissional: (0) / Doutorado: (1) . , Integrantes: Luigi Carro - Coordenador / Alexandre Ambrozi Junqueira - Integrante., Financiador(es): Companhia Estadual de Geração e Transmissão de Energia Elétrica - Matriz - Auxílio financeiro.
-
2007 - 2009
Metodologias Inovadoras de Desenvolvimento e Especificação de Software, Descrição: A produção de software embarcado responderá por parcela significativa do total de projetos de software no futuro próximo, pela enorme quantidade de produtos que são usados por consumidores de maneira até transparente, mas que dependem deste tipo de software. Exemplos são o telefone celular, os tocadores de MP3, as máquinas fotográficas digitais, os set top boxes da TV digital e outros produtos do dia-a-dia dos consumidores. A produção de software embarcado, contudo, enfrenta um grande desafio: obter software com alto grau de qualidade e confiabilidade, de modo rápido ? devido à intensa competição no mercado -, atingindo alta eficiência - já que a maioria dos sistemas portáteis mencionados tem limitações de potência e tamanho de memória - e dando suporte a diversos modelos de computação. Estes modelos são característicos de plataformas complexas com múltiplos comportamentos, como os celulares que devem executar múltiplos programas diferentes. Neste projeto propõe-se avançar o estado-da-arte no que tange à especificação, à automação e ao desenvolvimento de qualidade em software embarcado.. , Situação: Em andamento; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Especialização: (0) / Mestrado acadêmico: (2) / Mestrado profissional: (0) / Doutorado: (2) . , Integrantes: Luigi Carro - Coordenador / Marcio Kreutz - Integrante / Flavio Rech Wagner - Integrante / Lisane B de Brisolara - Integrante / Julio C B Mattos - Integrante / Ricardo Redin - Integrante / Luis da Cunha Lamb - Integrante., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro., Número de produções C, T & A: 13
-
2005 - 2007
ROBOPS, Descrição: Arithmetic Operators Robust to Multiple Simultaneous Faults - Financiamento do Semiconductoir Research Council dos EUA. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (1) / Doutorado: (2) . , Integrantes: Luigi Carro - Coordenador., Financiador(es): Semiconductor Research Council - Auxílio financeiro.
-
2004 - 2007
Eletrodo Inteligente, Descrição: Desenvolvimenrto de técncias de medição inteligentes, com processamento majoritariamente digital. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (4) / Mestrado acadêmico: (2) / Doutorado: (1) . , Integrantes: Luigi Carro - Coordenador., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro.
-
2003 - 2005
Sashimi - Framework para Projeto de Aplicações Baseadas em Software e Hardware Usando Processadores JAVA, Descrição: O objetivo do projeto foi prover a comunidade de software livre de uma maneira de produzir módulos de hardware de maneira também livre. Na conclusão do projeto foi disponibilizada uma página onde se pode entrar com um cofigo Java e obter o hardware que executa este código.. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Especialização: (0) / Mestrado acadêmico: (2) / Mestrado profissional: (0) / Doutorado: (3) . , Integrantes: Luigi Carro - Coordenador / J Mattos - Integrante / L Brisolara - Integrante / A C S Beck Filho - Integrante / Bruno Silveira Neves - Integrante / Victor F Gomes - Integrante., Financiador(es): Conselho Nacional de Desenvolvimento Científico e Tecnológico - Auxílio financeiro., Número de produções C, T & A: 13
-
2001 - 2002
Prototipação de nariz artificial, Descrição: O objetivo deste projeto é o de prototipar um sensor capaz de avaliar automaticamnte a presença de gases toxicos ou não, em ambientes onde a sensibilidade olfativa é fundamental (indústriua de vinho e mineração).. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Luigi Carro - Coordenador.
-
1999 - 2002
Medidor de Energia, Descrição: Desenvolvimentro de algoritmos para medição de energia inteligente. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (2) / Mestrado acadêmico: (2) . , Integrantes: Luigi Carro - Coordenador., Financiador(es): Financiadora de Estudos e Projetos - Auxílio financeiro.
-
1998 - 1999
HARDPRO, Descrição: Prototipação de hardware. , Situação: Concluído; Natureza: Pesquisa. , Alunos envolvidos: Graduação: (3) / Mestrado acadêmico: (2) . , Integrantes: Luigi Carro - Coordenador., Financiador(es): Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul - Auxílio financeiro.
-
1997 - 2002
Ambiente Ágata - Gate Array nacional, Descrição: o objetivo deste projeto é o desenvolvimento do ambiente de CAD para configuração de um gate array nacional. Tanto o software de programação quanto o primeiro protótipo foram desenvolvidos na UFRGS.. , Situação: Concluído; Natureza: Pesquisa. , Integrantes: Luigi Carro - Coordenador / Marcelo Johann - Integrante / Marcus Kindel - Integrante.
Projetos de desenvolvimento
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2008 - 2008
LeaderTech ASP, Descrição: prover software de baixo consumo de energia para aplicações em mobile em service oriented arquitectures. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2007 - 2008
Medidor de Qualidade de Energia, Descrição: O objetivo deste projeto é o de desenvolver um medidor de energia com capacidade de medição até a 50a harmônica, usando algoritmos refinados de processamento digital de sinais. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
-
2004 - 2006
Tarifação de energia elétrica inteligente, Descrição: Este projeto visa refinar a medição de energia de modo a permitir uma tarifação diferencia, pelo tipo e horário de consumo residencial e industrial.. , Situação: Concluído; Natureza: Desenvolvimento. , Integrantes: Luigi Carro - Coordenador.
Prêmios
2021
Ordem Nacional do Mérito Científico, classe Comendador, Presidência da Republica.
2013
FPL Best paper award - Michal Servit Memorial Award, FPL 2013 - Xilinx.
2010
Best Student paper award, DFTS 2010 - IEEE Defect and Fault Tolerance in VLSI Systems.
2009
Orientador: Prêmio UFRGS - Jovem pequisador 2009 - Ronaldo Ferreira, UFRGS - Propesq.
2007
Pesquisador Destaque 2007, Fapergs - Copesul.
2007
Best paper Award - VLSI-SOC 2007 Transparnt Acceleration of Data Dependent Instructions for General Purpose Processors, IFIP International Conference on VLSI and SoC.
2006
2005 EDAA Outstanding Dissertations Award - Orientador da tese: Low Cost BIST Techniques for Linear and Non-Linear Analog Circuits de Marcelo Negreiros, IEEE - DATE Design Automation and Test in Europe.
2006
Best Paper Award - LATW 2005 Best paper award Artigo: Using memory to cope with simultaneous transient faults, IEEE TTTC.
2000
Menção Honrosa na XI Feira de Iniciação Científica da UFRGS, Universidade Federal do Rio Grande do Sul.
1998
Destaque no X Salão de Iniciação Científica da UFRGS, Universidade Federal do Rio Grande do Sul.
1997
The Best Application and System Design Award, International Federation for Information Processing - IFIP-VLSI 97.
1996
Menção Honrosa na VII Feira de Iniciação Científica da UFRGS, Universidade Federal do Rio Grande do Sul.
Histórico profissional
Endereço profissional
-
Universidade Federal do Rio Grande do Sul, Instituto de Informática, Departamento de Informática Aplicada. , Av. Bento Gonçalves 9500, Agronomia, 91501970 - Porto Alegre, RS - Brasil - Caixa-postal: 15064, Telefone: (51) 33166806, Ramal: 6806, Fax: (51) 33167308, URL da Homepage:
Experiência profissional
2011 - 2013
União EuropeiaVínculo: Professor Visitante, Enquadramento Funcional: Coordenador local, Carga horária: 10
2001 - 2002
Vitae Apoio à Cultura, Educação e Promoção SocialVínculo: Colaborador, Enquadramento Funcional: coordenador, Carga horária: 10
1995 - Atual
Universidade Federal do Rio Grande do SulVínculo: Servidor Público, Enquadramento Funcional: Professor Associado, Carga horária: 40, Regime: Dedicação exclusiva.
Atividades
-
01/2013
Direção e administração, Instituto de Informática.,Cargo ou função, Coordenador do Programa de Pós-Graduação em Computação.
-
01/2011
Conselhos, Comissões e Consultoria, Instituto de Informática.,Cargo ou função, Membro Comissão de Pós-Graduação em Computação.
-
01/2011
Conselhos, Comissões e Consultoria, Instituto de Informática.,Cargo ou função, Representante Docente do CONINF - Conselho do Instituto de Informática.
-
10/2006
Direção e administração, Instituto de Informática.,Cargo ou função, Coordenador da Comissão de Pesquisa.
-
03/2006
Ensino, Ciência da Computação, Nível: Graduação,Disciplinas ministradas, INF118 - Técnicas Digitais, Tópicos Especiais: Sistemas Embarcados, Inf113 - Arquitetura e organização de computadores B
-
07/1997
Ensino, Computação, Nível: Pós-Graduação,Disciplinas ministradas, CMP117-Arquiteturas VLSI-II, CMP172-Introdução ao Processamento Digital de Sinais, CMP231-Sistemas Embarcados
-
01/2009 - 12/2010
Direção e administração, Instituto de Informática.,Cargo ou função, Coordenador da Comissão de Pesquisa do Inf.
-
01/2007 - 01/2009
Conselhos, Comissões e Consultoria, Instituto de Informática.,Cargo ou função, Membro da Comissão de Pós-Graduação em Computação.
-
03/1998 - 01/2008
Ensino, Engenharia Elétrica, Nível: Pós-Graduação,Disciplinas ministradas, PPGEE 0008 - Prototipação de Sistemas, PPGEE 0009 - Projeto VLSI
-
05/1996 - 01/2007
Pesquisa e desenvolvimento, Escola de Engenharia, Departamento de Engenharia Elétrica.,Linhas de pesquisa
-
10/1995 - 06/2006
Ensino, Engenharia Elétrica, Nível: Graduação,Disciplinas ministradas, Eletricidade Básica, Eletrônica Fundamental, Microprocessadores I, Sistemas Digitais
-
03/2004 - 03/2006
Direção e administração, Programa de Pós Graduação, Escola de Engenharia.,Cargo ou função, Coordenador Substituto do Programa de Pós-Graduação.
-
03/1998 - 03/2006
Direção e administração, Escola de Engenharia, Departamento de Engenharia Elétrica.,Cargo ou função, Membro da Comissão Coordenadora da Pós-Graduação em Engenharia Elétrica.
-
01/1999
Ensino, Engenharia de Computação, Nível: Graduação,Disciplinas ministradas, Processamento Digital de Sinais
-
01/1998
Direção e administração, Escola de Engenharia, Departamento de Engenharia Elétrica.,Cargo ou função, Membro de comissão permanente: pesquisa.
-
03/1997
Direção e administração, Escola de Engenharia, Departamento de Engenharia Elétrica.,Cargo ou função, Membro da Comissão de Organização da Feira de Iniciação Científica da UFRGS.
-
01/1997
Direção e administração, Escola de Engenharia, Departamento de Engenharia Elétrica.,Cargo ou função, Membro de comissão permanente: Informática.
2005 - 2005
Universidade Federal de Santa CatarinaVínculo: Professor Visitante, Enquadramento Funcional: Outro (especifique) professor visitante, Carga horária: 40, Regime: Dedicação exclusiva.
Outras informações:
Professor Participante do Programa de Pós-Graduação em Engenharia Elétrica da UFSC, para ministrar a disciplina EEl 6570-Tópicos Especiais em Eletrônica: Projeto e Prototipação de Sistemas Digitais de 03 créditos no período de 31/01/2005 a 20/03/2005
Atividades
-
01/2005 - 03/2005
Outras atividades técnico-científicas , Centro Tecnológico, Centro Tecnológico.,Atividade realizada, Professor Participante - orientação de alunos.
-
01/2005 - 02/2005
Ensino, Engenharia Elétrica, Nível: Pós-Graduação,Disciplinas ministradas, Topicos Especiais; Sistemas Computacionais Embarcados
Criando um monitoramento
Nossos robôs irão buscar nos nossos bancos de dados todos os processos de Luigi Carro e sempre que o nome aparecer em publicações dos Diários Oficiais, avisaremos por e-mail e pelo painel do usuário
Criando um monitoramento
Nossos robôs irão buscar nos nossos bancos de dados todas as movimentações desse processo e sempre que o processo aparecer em publicações dos Diários Oficiais e nos Tribunais, avisaremos por e-mail e pelo painel do usuário
Confirma a exclusão?